Move all to deprecated folder.

deprecated/firmware/buildroot/board/minnowboard-max/grub.cfg

@@ -0,0 +1,6 @@
+set default="0"
+set timeout="5"
+
+menuentry "Buildroot" {
+	linux /bzImage root=/dev/mmcblk0p2 rootwait console=tty0 console=ttyS0,115200
+}

deprecated/firmware/buildroot/board/minnowboard-max/linux.config

@@ -0,0 +1,46 @@
+CONFIG_NO_HZ=y
+CONFIG_SMP=y
+CONFIG_X86_INTEL_LPSS=y
+CONFIG_MATOM=y
+CONFIG_EFI=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_X86_INTEL_PSTATE=y
+CONFIG_X86_ACPI_CPUFREQ=y
+CONFIG_INTEL_IDLE=y
+CONFIG_IA32_EMULATION=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_ATA_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_R8169=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_I2C_I801=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_I2C_DESIGNWARE_PCI=y
+CONFIG_SPI=y
+CONFIG_SPI_PXA2XX=y
+CONFIG_SPI_DESIGNWARE=y
+CONFIG_PINCTRL_BAYTRAIL=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_AGP=y
+CONFIG_DRM=y
+CONFIG_DRM_I915=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PCI=y
+CONFIG_MMC_SDHCI_ACPI=y
+CONFIG_PWM=y
+CONFIG_PWM_LPSS=y
+CONFIG_EXT4_FS=y

deprecated/firmware/buildroot/board/minnowboard-max/post-build.sh

@@ -0,0 +1,2 @@
+#!/bin/sh
+cp board/minnowboard-max/grub.cfg ${BINARIES_DIR}/efi-part/EFI/BOOT/grub.cfg

deprecated/firmware/buildroot/board/minnowboard-max/readme.txt

@@ -0,0 +1,40 @@
+Prepare the SD card for the Minnow Board MAX
+============================================
+
+ 1. Partition the SD card with a GPT partition table
+
+    sudo cgdisk /dev/mmcblk0
+
+    Create two partitions:
+
+     a) First partition of a few dozens of megabytes, which will be
+        used to store the bootloader and the kernel image. Type must
+        be EF00 (EFI partition).
+
+     b) Second partition of any size, which will be used to store the
+        root filesystem. Type must be 8300 (Linux filesystem)
+
+ 2. Prepare the boot partition
+
+    We will format it, mount it, copy the EFI data generated by
+    Buildroot, and the kernel image.
+
+    sudo mkfs.vfat -F 32 -n boot /dev/mmcblk0p1
+    sudo mount /dev/mmcblk0p1 /mnt
+    sudo cp -a output/images/efi-part/* /mnt/
+    sudo cp output/images/bzImage /mnt/
+    sudo umount /mnt
+
+ 3. Prepare the root partition
+
+    We will format it, mount it, and extract the root filesystem.
+
+    sudo mkfs.ext4 -L root /dev/mmcblk0p2
+    sudo mount /dev/mmcblk0p2 /mnt
+    sudo tar -C /mnt -xf output/images/rootfs.tar
+    sudo umount /mnt
+
+ 4. Enjoy
+
+Additional information about this board can be found at
+http://www.minnowboard.org/ or http://wiki.minnowboard.org/MinnowBoard_MAX