Move all to deprecated folder.

deprecated/firmware/buildroot/board/raspberrypi/genimage-raspberrypi.cfg

@@ -0,0 +1,32 @@
+image boot.vfat {
+  vfat {
+    files = {
+      "bcm2708-rpi-b.dtb",
+      "bcm2708-rpi-b-plus.dtb",
+      "bcm2708-rpi-cm.dtb",
+      "rpi-firmware/bootcode.bin",
+      "rpi-firmware/cmdline.txt",
+      "rpi-firmware/config.txt",
+      "rpi-firmware/fixup.dat",
+      "rpi-firmware/start.elf",
+      "kernel-marked/zImage"
+    }
+  }
+  size = 32M
+}
+
+image sdcard.img {
+  hdimage {
+  }
+
+  partition boot {
+    partition-type = 0xC
+    bootable = "true"
+    image = "boot.vfat"
+  }
+
+  partition rootfs {
+    partition-type = 0x83
+    image = "rootfs.ext4"
+  }
+}

deprecated/firmware/buildroot/board/raspberrypi/genimage-raspberrypi2.cfg

@@ -0,0 +1,30 @@
+image boot.vfat {
+  vfat {
+    files = {
+      "bcm2709-rpi-2-b.dtb",
+      "rpi-firmware/bootcode.bin",
+      "rpi-firmware/cmdline.txt",
+      "rpi-firmware/config.txt",
+      "rpi-firmware/fixup.dat",
+      "rpi-firmware/start.elf",
+      "kernel-marked/zImage"
+    }
+  }
+  size = 32M
+}
+
+image sdcard.img {
+  hdimage {
+  }
+
+  partition boot {
+    partition-type = 0xC
+    bootable = "true"
+    image = "boot.vfat"
+  }
+
+  partition rootfs {
+    partition-type = 0x83
+    image = "rootfs.ext4"
+  }
+}

deprecated/firmware/buildroot/board/raspberrypi/post-image.sh

@@ -0,0 +1,22 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname $0)"
+BOARD_NAME="$(basename ${BOARD_DIR})"
+GENIMAGE_CFG="${BOARD_DIR}/genimage-${BOARD_NAME}.cfg"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+# Mark the kernel as DT-enabled
+mkdir -p "${BINARIES_DIR}/kernel-marked"
+${HOST_DIR}/usr/bin/mkknlimg "${BINARIES_DIR}/zImage" \
+	"${BINARIES_DIR}/kernel-marked/zImage"
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage                           \
+	--rootpath "${TARGET_DIR}"     \
+	--tmppath "${GENIMAGE_TMP}"    \
+	--inputpath "${BINARIES_DIR}"  \
+	--outputpath "${BINARIES_DIR}" \
+	--config "${GENIMAGE_CFG}"
+
+exit $?

deprecated/firmware/buildroot/board/raspberrypi/readme.txt

@@ -0,0 +1,77 @@
+Raspberry Pi
+
+Intro
+=====
+
+These instructions apply to all models of the Raspberry Pi:
+  - the original models A and B,
+  - the "enhanced" models A+ and B+,
+  - the model B2 (aka Raspberry Pi 2).
+
+How to build it
+===============
+
+Configure Buildroot
+-------------------
+
+There are two RaspberryPi defconfig files in Buildroot, one for each
+major variant, which you should base your work on:
+
+For models A, B, A+ or B+:
+
+  $ make raspberrypi_defconfig
+
+And for model 2 B:
+
+  $ make raspberrypi2_defconfig
+
+Build the rootfs
+----------------
+
+Note: you will need to have access to the network, since Buildroot will
+download the packages' sources.
+
+You may now build your rootfs with:
+
+  $ make
+
+(This may take a while, consider getting yourself a coffee ;-) )
+
+Result of the build
+-------------------
+
+After building, you should obtain this tree:
+
+    output/images/
+    +-- bcm2708-rpi-b.dtb           [1]
+    +-- bcm2708-rpi-b-plus.dtb      [1]
+    +-- bcm2709-rpi-2-b.dtb         [1]
+    +-- boot.vfat
+    +-- kernel-marked/zImage        [2]
+    +-- rootfs.ext4
+    +-- rpi-firmware/
+    |   +-- bootcode.bin
+    |   +-- cmdline.txt
+    |   +-- config.txt
+    |   +-- fixup.dat
+    |   `-- start.elf
+    +-- sdcard.img
+    `-- zImage
+
+[1] Not all of them will be present, depending on the RaspberryPi
+    model you are using.
+
+[2] This is the mkknlimg DT-marked kernel.
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+
+Insert the SDcard into your Raspberry Pi, and power it up. Your new system
+should come up now.