Move all to deprecated folder.

deprecated/firmware/buildroot/board/via/imx6_vab820/readme.txt

@@ -0,0 +1,120 @@
+VIA VAB-820/AMOS-820
+====================
+
+This file documents the Buildroot support for the VIA VAB-820 board and
+VIA AMOS-820 system, which are built around a Freescale i.MX6 Quad/Dual SoC.
+The kernel and u-boot is based on the official VIA BSP, which is in turn
+based on the Freescale Linux 3.10.17_1.0.0_ga BSP.
+
+
+Configuring and building Buildroot
+----------------------------------
+
+Start from the defconfig:
+
+  $ make via_imx6_vab820_defconfig
+
+You can edit build options the usual way:
+
+  $ make menuconfig
+
+When you are happy with the setup, run:
+
+  $ make
+
+The result of the build with the default settings should be these files:
+
+  output/images
+  ├── boot.vfat
+  ├── imx6q-vab820.dtb
+  ├── rootfs.ext2
+  ├── rootfs.ext4 -> rootfs.ext2
+  ├── rootfs.tar
+  ├── sdcard.img
+  ├── u-boot.imx
+  └── uImage
+
+Copy the bootable `sdcard.img` onto an SD card with "dd":
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdX bs=1M conv=fsync
+
+where "sdX" is the appropriate partition of your card.
+
+For details about the medium image layout, see the definition in
+`board/via/imx6_vab820/genimage.cfg`.
+
+
+Setting up your SD card manually
+--------------------------------
+
+*Important*: pay attention which partition you are modifying so you don't
+accidentally erase the wrong file system, e.g your host computer or your
+external storage!
+
+In the default setup you need to create 2 partitions on your SD card:
+a boot partition and a root partition. In this guide and in the default u-boot
+settings the boot partition is vfat, while the root partition is ext4.
+
+You also need to leave space for u-boot at the beginning of the card, before
+all the partitions.
+
+For example, if your SD card is at /dev/sdX, using fdisk, and starting from
+an empty card, the steps are along these lines:
+
+  # fdisk /dev/sdX
+  n         (new partition)
+  p         (primary partition)
+  1	    (first partition)
+  <return>  (default first sector, should be at least 1MB from the beginning
+             which is 2048 sectors if the sector size is 512KB)
+  +50M      (50MB size, as an example)
+  t         (switch partition type)
+  b         (select "W95 FAT32" type)
+  n         (the second partition)
+  p         (primary partition)
+  2	    (second partition)
+  <return>  (default first sector)
+  <return>  (use all remaining space)
+  p         (print so the partition looks something like this below)
+    Device     Boot  Start      End  Sectors  Size Id Type
+    /dev/sdX1         2048   104447   102400   50M  b W95 FAT32
+    /dev/sdX2       104448 15564799 15460352  7.4G 83 Linux
+  w         (save changes)
+
+After this you need to format the newly created file system:
+
+  # mkfs.vfat -L boot /dev/sdX1
+  # mkfs.ext4 -L rootfs /dev/sdX2
+
+Now the system can be copied onto the card. First copy the u-boot onto
+the region of the card before the first partition (starting from the
+root directory of buildroot):
+
+  # dd if=output/images/u-boot.imx of=/dev/sdX bs=512 seek=2
+
+Mount the first partition /dev/sdX1, and copy the kernel and the
+compiled device tree:
+
+  # cp output/images/uImage /mnt/<BOOT-PARTITION>
+  # cp output/images/imx6q-vab820.dtb /mnt/<BOOT-PARTITION>
+
+Finally, copy the root file system onto the mounted (empty) /dev/sdX2
+rootfs partition:
+
+  # tar xf output/images/rootfs.tar -C /mnt/<ROOTFS-PARTITION>
+
+
+Booting
+-------
+
+To use the on-card u-boot, you need adjust jumper J11 located just next to
+the SD card slot on the VAB-820 board. The correct position for SD card
+boot is jumping the two pins towards the inside of the board.
+
+To modify the default boot parameters compiled into u-boot, you can create
+a boot script with the file name `boot.scr` and place it onto the boot
+partition (same directory as `uImage`).
+
+If you want to have the login prompt on the serial debug line instead of
+the console, adjust the buildroot settings as:
+"System Configuration > getty options > TTY port > ttymxc1"