Move all to deprecated folder.

deprecated/firmware/buildroot/board/wandboard/genimage.cfg

@@ -0,0 +1,38 @@
+# Minimal SD card image for the Wandboard
+#
+# The SD card must have at least 1 MB free at the beginning.
+# U-Boot and its environment are dumped as is.
+# A single root filesystem partition is required (Ext2 in this case).
+#
+# For details about the layout, see:
+# http://wiki.wandboard.org/index.php/Boot-process
+
+image sdcard.img {
+  hdimage {
+  }
+
+  partition spl {
+    in-partition-table = "no"
+    image = "SPL"
+    offset = 1024
+  }
+
+  partition u-boot {
+    in-partition-table = "no"
+    image = "u-boot.img"
+    offset = 70656
+  }
+
+  partition u-boot-env {
+    in-partition-table = "no"
+    image = "uboot-env.bin"
+    offset = 393216
+    size = 8192
+  }
+
+  partition rootfs {
+    partition-type = 0x83
+    image = "rootfs.ext2"
+    size = 512M
+  }
+}

deprecated/firmware/buildroot/board/wandboard/post-image.sh

@@ -0,0 +1,16 @@
+#!/usr/bin/env bash
+
+GENIMAGE_CFG="board/wandboard/genimage.cfg"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage \
+  --rootpath "${TARGET_DIR}" \
+  --tmppath "${GENIMAGE_TMP}" \
+  --inputpath "${BINARIES_DIR}" \
+  --outputpath "${BINARIES_DIR}" \
+  --config "${GENIMAGE_CFG}"
+
+RET=${?}
+exit ${RET}

deprecated/firmware/buildroot/board/wandboard/readme.txt

@@ -0,0 +1,14 @@
+Wandboard
+
+http://www.wandboard.org
+
+To build a minimal support for this board:
+
+    $ make wandboard_defconfig
+    $ make
+
+Buildroot prepares a bootable "sdcard.img" image in the output/images/
+directory, ready to be dumped on an SD card.
+
+For details about the medium image layout, see the definition in
+board/wandboard/genimage.cfg.

deprecated/firmware/buildroot/board/wandboard/uboot-env.txt

@@ -0,0 +1,28 @@
+baudrate=115200
+boot_fdt=try
+bootcmd=run findfdt; mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi
+bootdelay=3
+bootscript=echo Running bootscript from mmc ...; source
+console=ttymxc0
+ethact=FEC
+ethaddr=00:1f:7b:b2:05:ee
+ethprime=FEC
+loadaddr=0x12000000
+fdt_addr=0x18000000
+fdt_high=0xffffffff
+fdtfile=undefined
+findfdt=if test $board_rev = MX6Q ; then setenv fdtfile imx6q-wandboard.dtb; fi; if test $board_rev = MX6DL ; then setenv fdtfile imx6dl-wandboard.dtb; fi; if test $fdtfile = undefined; then echo WARNING: Could not determine dtb to use; fi;
+loadfdt=ext2load mmc ${mmcdev}:${mmcpart} ${fdt_addr} /boot/${fdtfile}
+loadbootscript=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};
+loadimage=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}
+mmcargs=setenv bootargs console=${console},${baudrate} root=${mmcroot}; run videoargs
+videoargs=setenv nextcon 0; if hdmidet; then setenv bootargs ${bootargs} video=mxcfb${nextcon}:dev=hdmi,1280x720M@60,if=RGB24; setenv fbmen fbmem=28M; setexpr nextcon ${nextcon} + 1; else echo - no HDMI monitor;fi; i2c dev 1; if i2c probe 0x10; then setenv bootargs ${bootargs} video=mxcfb${nextcon}:dev=lcd,800x480@60,if=RGB666,bpp=32; if test 0 -eq ${nextcon}; then setenv fbmem fbmem=10M; else setenv fbmem ${fbmem},10M; fi; setexpr nextcon ${nextcon} + 1; else echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';fi; setenv bootargs ${bootargs} ${fbmem}
+mmcboot=echo Booting from mmc ...; run mmcargs; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run loadfdt; then bootz ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi;
+mmcdev=0
+mmcpart=1
+mmcroot=/dev/mmcblk2p1 rootwait rw
+netargs=setenv bootargs console=${console},${baudrate} root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp
+netboot=echo Booting from net ...; run netargs; if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; ${get_cmd} ${image}; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if ${get_cmd} ${fdt_addr} /boot/${fdtfile}; then bootz ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi;
+script=boot/boot.scr
+image=boot/zImage
+splashpos=m,m