Move all to deprecated folder.

deprecated/firmware/buildroot/package/madplay/0001-switch-to-new-alsa-api.patch

@@ -0,0 +1,173 @@
+Switch madplay to the new API. This is done thanks to a patch written
+by Micha Nelissen <micha@neli.hopto.org> and available at
+http://article.gmane.org/gmane.comp.audio.mad.devel/729.
+
+--- madplay-0.15.2b/audio_alsa.c	2008-10-18 15:10:16.000000000 +0200
++++ madplay-0.15.2b/audio_alsa.c.new	2008-10-18 15:03:27.000000000 +0200
+@@ -28,31 +28,30 @@
+
+ #include <errno.h>
+
+-#define ALSA_PCM_OLD_HW_PARAMS_API
+-#define ALSA_PCM_OLD_SW_PARAMS_API
+ #include <alsa/asoundlib.h>
+
+ #include <mad.h>
+
+ #include "audio.h"
+
+-char *buf	= NULL;
+-int paused	= 0;
++#define BUFFER_TIME_MAX     500000
+
+-int rate	= -1;
+-int channels	= -1;
+-int bitdepth	= -1;
+-int sample_size	= -1;
+-
+-int buffer_time		= 500000;
+-int period_time		= 100000;
+-char *defaultdev	= "plughw:0,0";
++unsigned char *buf  = NULL;
++int paused	    = 0;
++
++unsigned int rate           = 0;
++unsigned int channels	    = -1;
++unsigned int bitdepth	    = -1;
++unsigned int sample_size    = -1;
++
++unsigned int buffer_time;
++unsigned int period_time;
++char *defaultdev	    = "plughw:0,0";
+
+ snd_pcm_hw_params_t *alsa_hwparams;
+ snd_pcm_sw_params_t *alsa_swparams;
+
+-snd_pcm_sframes_t buffer_size;
+-snd_pcm_sframes_t period_size;
++snd_pcm_uframes_t buffer_size;
+
+ snd_pcm_format_t  alsa_format = -1;
+ snd_pcm_access_t  alsa_access = SND_PCM_ACCESS_MMAP_INTERLEAVED;
+@@ -66,14 +65,20 @@
+ 		 snd_pcm_hw_params_t *params,
+ 		 snd_pcm_access_t access)
+ {
+-	int err, dir;
+-	
++	int err;
++
+ 	/* choose all parameters */
+ 	err = snd_pcm_hw_params_any(handle,params);
+ 	if (err < 0) {
+ 		printf("Access type not available for playback: %s\n", snd_strerror(err));
+ 		return err;
+ 	}
++	/* set the access type */
++	err = snd_pcm_hw_params_set_access(handle, params, alsa_access);
++	if (err < 0) {
++		printf("Sample format not available for playback: %s\n", snd_strerror(err));
++		return err;
++	}
+ 	/* set the sample format */
+ 	err = snd_pcm_hw_params_set_format(handle, params, alsa_format);
+ 	if (err < 0) {
+@@ -87,29 +92,38 @@
+ 		return err;
+ 	}
+ 	/* set the stream rate */
+-	err = snd_pcm_hw_params_set_rate_near(handle, params, rate, 0);
++	err = snd_pcm_hw_params_set_rate(handle, params, rate, 0);
+ 	if (err < 0) {
+ 		printf("Rate %iHz not available for playback: %s\n", rate, snd_strerror(err));
+ 		return err;
+ 	}
+-	if (err != rate) {
+-		printf("Rate doesn't match (requested %iHz, get %iHz)\n", rate, err);
+-		return -EINVAL;
+-	}
++	err = snd_pcm_hw_params_get_buffer_time_max(params, &buffer_time, NULL);
++        if (err < 0) {
++                printf("Unable to retrieve buffer time: %s\n", snd_strerror(err));
++                return err;
++        }
++        if (buffer_time > BUFFER_TIME_MAX)
++                buffer_time = BUFFER_TIME_MAX;
+ 	/* set buffer time */
+-	err = snd_pcm_hw_params_set_buffer_time_near(handle, params, buffer_time, &dir);
++	err = snd_pcm_hw_params_set_buffer_time_near(handle, params, &buffer_time, 0);
+ 	if (err < 0) {
+ 		printf("Unable to set buffer time %i for playback: %s\n", buffer_time, snd_strerror(err));
+ 		return err;
+ 	}
+-	buffer_size = snd_pcm_hw_params_get_buffer_size(params);
++        if (period_time * 4 > buffer_time)
++                period_time = buffer_time / 4;
+ 	/* set period time */
+-	err = snd_pcm_hw_params_set_period_time_near(handle, params, period_time, &dir);
++	err = snd_pcm_hw_params_set_period_time_near(handle, params, &period_time, NULL);
+ 	if (err < 0) {
+ 		printf("Unable to set period time %i for playback: %s\n", period_time, snd_strerror(err));
+ 		return err;
+ 	}
+-	period_size = snd_pcm_hw_params_get_period_size(params, &dir);
++        /* retrieve buffer size */
++	err = snd_pcm_hw_params_get_buffer_size(params, &buffer_size);
++        if (err < 0) {
++                printf("Unable to retrieve buffer size: %s\n", snd_strerror(err));
++                return err;
++        }
+ 	/* write the parameters to device */
+ 	err = snd_pcm_hw_params(handle, params);
+ 	if (err < 0) {
+@@ -123,6 +137,7 @@
+ int set_swparams(snd_pcm_t *handle,
+ 		 snd_pcm_sw_params_t *params)
+ {
++        unsigned int start_threshold;
+ 	int err;
+
+         /* get current swparams */
+@@ -136,13 +151,7 @@
+         if (err < 0) {
+                 printf("Unable to set start threshold mode for playback: %s\n", snd_strerror(err));
+                 return err;
+-										        }
+-        /* allow transfer when at least period_size samples can be processed */
+-        err = snd_pcm_sw_params_set_avail_min(handle, params, period_size);
+-        if (err < 0) {
+-                printf("Unable to set avail min for playback: %s\n", snd_strerror(err));
+-                return err;
+-												        }
++	}
+         /* align all transfers to 1 samples */
+         err = snd_pcm_sw_params_set_xfer_align(handle, params, 1);
+         if (err < 0) {
+@@ -190,7 +199,7 @@
+ 	rate		= config->speed;
+
+ 	if ( bitdepth == 0 )
+-		config->precision = bitdepth = 32;
++		config->precision = bitdepth = 16;
+
+ 	switch (bitdepth)
+ 	{
+@@ -241,7 +250,7 @@
+ 		return -1;
+ 	}
+
+-	buf = malloc(buffer_size);
++	buf = malloc(buffer_size * sample_size);
+ 	if (buf == NULL) {
+ 		audio_error="unable to allocate output buffer table";
+ 		return -1;
+@@ -279,7 +288,7 @@
+ int play(struct audio_play *play)
+ {
+ 	int err, len;
+-	char *ptr;
++	unsigned char *ptr;
+
+ 	ptr = buf;
+ 	len = play->nsamples;
+

deprecated/firmware/buildroot/package/madplay/Config.in

@@ -0,0 +1,22 @@
+config BR2_PACKAGE_MADPLAY
+	bool "madplay"
+	select BR2_PACKAGE_LIBMAD
+	select BR2_PACKAGE_LIBID3TAG
+	select BR2_PACKAGE_GETTEXT if BR2_NEEDS_GETTEXT_IF_LOCALE
+	help
+	  Command-line front-end to libmad, a high-quality MPEG audio decoder.
+	  It currently supports MPEG-1 and the MPEG-2 extension to lower
+	  sampling frequencies, as well as the de facto MPEG 2.5 format. All
+	  three audio layers — Layer I, Layer II, and Layer III (i.e. MP3) —
+	  are fully implemented.
+
+	  http://www.underbit.com/products/mad/
+
+if BR2_PACKAGE_MADPLAY
+
+config BR2_PACKAGE_MADPLAY_ALSA
+	bool
+	default y
+	depends on BR2_PACKAGE_ALSA_LIB
+
+endif

deprecated/firmware/buildroot/package/madplay/madplay.hash

@@ -0,0 +1,2 @@
+# Locally computed:
+sha256  5a79c7516ff7560dffc6a14399a389432bc619c905b13d3b73da22fa65acede0  madplay-0.15.2b.tar.gz

deprecated/firmware/buildroot/package/madplay/madplay.mk

@@ -0,0 +1,22 @@
+################################################################################
+#
+# madplay
+#
+################################################################################
+
+MADPLAY_VERSION = 0.15.2b
+MADPLAY_SITE = http://downloads.sourceforge.net/project/mad/madplay/$(MADPLAY_VERSION)
+MADPLAY_LICENSE = GPLv2+
+MADPLAY_LICENSE_FILES = COPYING COPYRIGHT
+MADPLAY_LIBTOOL_PATCH = NO
+MADPLAY_DEPENDENCIES = libmad libid3tag $(if $(BR2_PACKAGE_GETTEXT),gettext)
+
+# Check if ALSA is built, then we should configure after alsa-lib so
+# ./configure can find alsa-lib.
+ifeq ($(BR2_PACKAGE_MADPLAY_ALSA),y)
+MADPLAY_CONF_OPTS += --with-alsa
+MADPLAY_DEPENDENCIES += host-pkgconf alsa-lib
+MADPLAY_CONF_ENV += LIBS="`$(PKG_CONFIG_HOST_BINARY) --libs alsa`"
+endif
+
+$(eval $(autotools-package))