Move all to deprecated folder.

deprecated/firmware/buildroot/package/openocd/0002-Fix-jimtcl-auto-configuration-to-force-static-librar.patch

@@ -0,0 +1,27 @@
+From 3bef159779c8fd39a070ec5c8191e18ba2efa79d Mon Sep 17 00:00:00 2001
+From: Claudio Laurita <claudio.laurita@integrazionetotale.it>
+Date: Sun, 30 Nov 2014 18:21:58 +0100
+Subject: [PATCH 2/2] Fix jimtcl auto configuration to force static library
+ only. jimtcl ignores a --disable-shared option if a previous --enable-shared
+ option was given. This breaks openocd compilation if shared was the preferred
+ option in buildroot project.
+
+Signed-off-by: Claudio Laurita <claudio.laurita@integrazionetotale.it>
+
+--- a/jimtcl/auto.def
++++ b/jimtcl/auto.def
+@@ -194,12 +194,8 @@
+     msg-result "Enabling references"
+     define JIM_REFERENCES
+ }
+-if {[opt-bool shared with-jim-shared]} {
+-    msg-result "Building shared library"
+-} else {
+-    msg-result "Building static library"
+-    define JIM_STATICLIB
+-}
++msg-result "Building static library"
++define JIM_STATICLIB
+ define LIBSOEXT [format [get-define SH_SOEXTVER] [format %.2f [expr {[get-define JIM_VERSION] / 100.0}]]]
+ define JIM_INSTALL [opt-bool install-jim]
+ define JIM_DOCS [opt-bool docs]

deprecated/firmware/buildroot/package/openocd/Config.in

@@ -0,0 +1,214 @@
+config BR2_PACKAGE_OPENOCD
+	bool "openocd"
+	help
+	  OpenOCD - Open On-Chip Debugger
+
+	  http://openocd.sourceforge.net/
+
+if BR2_PACKAGE_OPENOCD
+
+comment "Adapters"
+
+config BR2_PACKAGE_OPENOCD_FTDI
+	bool "MPSSE mode of FTDI based devices"
+	select BR2_PACKAGE_LIBUSB
+	depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
+	help
+	  Enable building support for the MPSSE mode of FTDI
+	  (FT2xxx/FT4xxx) based devices (default is auto)
+
+config BR2_PACKAGE_OPENOCD_STLINK
+	bool "ST-Link JTAG Programmer"
+	select BR2_PACKAGE_LIBUSB
+	depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
+	help
+	  Enable building support for the ST-Link JTAG
+	  Programmer (default is auto)
+
+config BR2_PACKAGE_OPENOCD_TI_ICDI
+	bool "TI ICDI JTAG Programmer"
+	select BR2_PACKAGE_LIBUSB
+	depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
+	help
+	  Enable building support for the TI ICDI JTAG
+	  Programmer (default is auto)
+
+config BR2_PACKAGE_OPENOCD_ULINK
+	bool "Keil ULINK JTAG Programmer"
+	select BR2_PACKAGE_LIBUSB
+	depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
+	help
+	  Enable building support for the Keil ULINK JTAG
+	  Programmer (default is auto)
+
+config BR2_PACKAGE_OPENOCD_UBLASTER2
+	bool "Altera USB-Blaster II Compatible"
+	select BR2_PACKAGE_LIBUSB
+	depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
+	help
+	  Enable building support for the Altera USB-Blaster
+	  II Compatible (default is auto)
+
+config BR2_PACKAGE_OPENOCD_JLINK
+	bool "Segger J-Link JTAG Programmer"
+	select BR2_PACKAGE_LIBUSB
+	depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
+	help
+	  Segger J-Link JTAG Programmer and clone such as Atmel
+	  SAM-ICE
+
+config BR2_PACKAGE_OPENOCD_OSDBM
+	bool "OSDBM JTAG (only) Programmer"
+	select BR2_PACKAGE_LIBUSB
+	depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
+	help
+	  Enable building support for the OSBDM (JTAG only)
+	  Programmer (default is auto)
+
+config BR2_PACKAGE_OPENOCD_OPENDOUS
+	bool "eStick/opendous JTAG Programmer"
+	select BR2_PACKAGE_LIBUSB
+	depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
+	help
+	  Enable building support for the eStick/opendous JTAG
+	  Programmer (default is auto)
+
+config BR2_PACKAGE_OPENOCD_AICE
+	bool "Andes JTAG Programmer"
+	select BR2_PACKAGE_LIBUSB
+	depends on BR2_USE_MMU # use fork()
+	depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
+	help
+	  Enable building support for the Andes JTAG
+	  Programmer (default is auto)
+
+config BR2_PACKAGE_OPENOCD_VSLLINK
+	bool "Versaloon-Link JTAG Programmer"
+	select BR2_PACKAGE_LIBUSB
+	select BR2_PACKAGE_LIBUSB_COMPAT
+	depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb
+	help
+	  Enable building support for the Versaloon-Link JTAG
+	  Programmer (default is auto)
+
+config BR2_PACKAGE_OPENOCD_USBPROG
+	bool "USBProg JTAG Programmer"
+	select BR2_PACKAGE_LIBUSB
+	select BR2_PACKAGE_LIBUSB_COMPAT
+	depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb
+	help
+	  Enable building support for the USBProg JTAG
+	  Programmer (default is auto)
+
+config BR2_PACKAGE_OPENOCD_RLINK
+	bool "Raisonance RLink JTAG Programmer"
+	select BR2_PACKAGE_LIBUSB
+	select BR2_PACKAGE_LIBUSB_COMPAT
+	depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb
+	help
+	  Enable building support for the Raisonance RLink
+	  JTAG Programmer (default is auto)
+
+config BR2_PACKAGE_OPENOCD_ARMEW
+	bool "Olimex ARM-JTAG-EW Programmer"
+	select BR2_PACKAGE_LIBUSB
+	select BR2_PACKAGE_LIBUSB_COMPAT
+	depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb
+	help
+	  Enable building support for the Olimex ARM-JTAG-EW
+	  Programmer (default is auto)
+
+config BR2_PACKAGE_OPENOCD_PARPORT
+	bool "pc parallel port driver"
+	help
+	  Enable building the pc parallel port driver
+
+config BR2_PACKAGE_OPENOCD_FT2XXX
+	bool "FT2232 based devices (DEPRECATED)"
+	select BR2_PACKAGE_LIBFTDI1
+	depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb
+	help
+	  (DEPRECATED) Enable building support for FT2232
+	  based devices using the libftdi library
+
+config BR2_PACKAGE_OPENOCD_VPI
+	bool "JTAG VPI"
+	help
+	  Enable building support for JTAG VPI
+
+config BR2_PACKAGE_OPENOCD_UBLASTER
+	bool "Altera USB-Blaster"
+	select BR2_PACKAGE_LIBFTDI1
+	depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb
+	help
+	  Enable building support for the Altera USB-Blaster
+	  using the libftdi driver, opensource alternate of
+	  FTD2XX
+
+config BR2_PACKAGE_OPENOCD_AMTJT
+	bool "Amontec JTAG-Accelerator"
+	help
+	  Enable building the Amontec JTAG-Accelerator driver
+
+if BR2_arm
+
+config BR2_PACKAGE_OPENOCD_EP93XX
+	bool "EP93xx based SBCs"
+	help
+	  Enable building support for EP93xx based SBCs
+
+config BR2_PACKAGE_OPENOCD_AT91RM
+	bool "AT91RM9200 based SBCs"
+	help
+	  Enable building support for AT91RM9200 based SBCs
+
+config BR2_PACKAGE_OPENOCD_BCM2835
+	bool "bitbanging on BCM2835"
+	help
+	  Enable building support for bitbanging on BCM2835
+	  (as found in Raspberry Pi)
+
+endif # BR2_arm
+
+config BR2_PACKAGE_OPENOCD_GW16012
+	bool "Gateworks GW16012 JTAG Programmer"
+	help
+	  Enable building support for the Gateworks GW16012
+	  JTAG Programmer
+
+config BR2_PACKAGE_OPENOCD_PRESTO
+	bool "ASIX Presto Programmer"
+	select BR2_PACKAGE_LIBFTDI1
+	depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb
+	help
+	  Enable building support for ASIX Presto Programmer
+	  using the libftdi driver
+
+config BR2_PACKAGE_OPENOCD_OPENJTAG
+	bool "OpenJTAG Programmer"
+	select BR2_PACKAGE_LIBFTDI1
+	select BR2_PACKAGE_LIBUSB
+	select BR2_PACKAGE_LIBUSB_COMPAT # needs usb.h
+	depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb
+	help
+	  Enable building support for the OpenJTAG Programmer
+	  with ftdi driver
+
+config BR2_PACKAGE_OPENOCD_BUSPIRATE
+	bool "Buspirate"
+	help
+	  Enable building support for the Buspirate
+
+config BR2_PACKAGE_OPENOCD_SYSFS
+	bool "programming via sysfs gpios"
+	help
+	  Enable building support for programming driven via
+	  sysfs gpios.
+
+# Many adapters need libusb or libusb-compat, which require threads,
+# but we don't want to duplicate this comment for all adapters that
+# select libusb or libusb-compat.
+comment "many openocd adapters needs a toolchain w/ threads"
+	depends on !BR2_TOOLCHAIN_HAS_THREADS
+
+endif # BR2_PACKAGE_OPENOCD

deprecated/firmware/buildroot/package/openocd/Config.in.host

@@ -0,0 +1,6 @@
+config BR2_PACKAGE_HOST_OPENOCD
+	bool "host openocd"
+	help
+	  OpenOCD - Open On-Chip Debugger
+
+	  http://openocd.org/

deprecated/firmware/buildroot/package/openocd/openocd.hash

@@ -0,0 +1,3 @@
+# From http://sourceforge.net/projects/openocd/files/openocd/0.9.0/
+sha1 bcf99bb21f09513065b2c9ece148ace7d16cdd0c openocd-0.9.0.tar.bz2
+md5 665cc98ae9e7297e09ec6ac7235fee49 openocd-0.9.0.tar.bz2

deprecated/firmware/buildroot/package/openocd/openocd.mk

@@ -0,0 +1,103 @@
+################################################################################
+#
+# openocd
+#
+################################################################################
+
+OPENOCD_VERSION = 0.9.0
+OPENOCD_SOURCE = openocd-$(OPENOCD_VERSION).tar.bz2
+OPENOCD_SITE = http://sourceforge.net/projects/openocd/files/openocd/$(OPENOCD_VERSION)
+
+OPENOCD_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -std=gnu99"
+
+OPENOCD_CONF_OPTS = \
+	--oldincludedir=$(STAGING_DIR)/usr/include \
+	--includedir=$(STAGING_DIR)/usr/include \
+	--disable-doxygen-html \
+	--with-jim-shared=no \
+	--disable-shared \
+	--enable-dummy \
+	--disable-werror
+
+# Rely on the Config.in options of each individual adapter selecting
+# the dependencies they need.
+
+OPENOCD_DEPENDENCIES = \
+	$(if $(BR2_PACKAGE_LIBFTDI1),libftdi1) \
+	$(if $(BR2_PACKAGE_LIBUSB),libusb) \
+	$(if $(BR2_PACKAGE_LIBUSB_COMPAT),libusb-compat) \
+	$(if $(BR2_PACKAGE_LIBHID),libhid)
+
+# Adapters
+OPENOCD_CONF_OPTS += \
+	$(if $(BR2_PACKAGE_OPENOCD_FTDI),--enable-ftdi,--disable-ftdi) \
+	$(if $(BR2_PACKAGE_OPENOCD_STLINK),--enable-stlink,--disable-stlink) \
+	$(if $(BR2_PACKAGE_OPENOCD_TI_ICDI),--enable-ti-icdi,--disable-ti-icdi) \
+	$(if $(BR2_PACKAGE_OPENOCD_ULINK),--enable-ulink,--disable-ulink) \
+	$(if $(BR2_PACKAGE_OPENOCD_UBLASTER2),--enable-usb-blaster-2,--disable-usb-blaster-2) \
+	$(if $(BR2_PACKAGE_OPENOCD_JLINK),--enable-jlink,--disable-jlink) \
+	$(if $(BR2_PACKAGE_OPENOCD_OSDBM),--enable-osbdm,--disable-osbdm) \
+	$(if $(BR2_PACKAGE_OPENOCD_OPENDOUS),--enable-opendous,--disable-opendous) \
+	$(if $(BR2_PACKAGE_OPENOCD_AICE),--enable-aice,--disable-aice) \
+	$(if $(BR2_PACKAGE_OPENOCD_VSLLINK),--enable-vsllink,--disable-vsllink) \
+	$(if $(BR2_PACKAGE_OPENOCD_USBPROG),--enable-usbprog,--disable-usbprog) \
+	$(if $(BR2_PACKAGE_OPENOCD_RLINK),--enable-rlink,--disable-rlink) \
+	$(if $(BR2_PACKAGE_OPENOCD_ARMEW),--enable-armjtagew,--disable-armjtagew) \
+	$(if $(BR2_PACKAGE_OPENOCD_CMSIS_DAP),--enable-cmsis-dap,--disable-cmsis-dap) \
+	$(if $(BR2_PACKAGE_OPENOCD_PARPORT),--enable-parport,--disable-parport) \
+	$(if $(BR2_PACKAGE_OPENOCD_FT2XXX),--enable-legacy-ft2232_libftdi,--disable-legacy-ft2232_libftdi) \
+	$(if $(BR2_PACKAGE_OPENOCD_VPI),--enable-jtag_vpi,--disable-jtag_vpi) \
+	$(if $(BR2_PACKAGE_OPENOCD_UBLASTER),--enable-usb_blaster_libftdi,--disable-usb_blaster_libftdi) \
+	$(if $(BR2_PACKAGE_OPENOCD_AMTJT),--enable-amtjtagaccel,--disable-amjtagaccel) \
+	$(if $(BR2_PACKAGE_OPENOCD_ZY1000_MASTER),--enable-zy1000-master,--disable-zy1000-master) \
+	$(if $(BR2_PACKAGE_OPENOCD_ZY1000),--enable-zy1000,--disable-zy1000) \
+	$(if $(BR2_PACKAGE_OPENOCD_EP93XX),--enable-ep93xx,--disable-ep93xx) \
+	$(if $(BR2_PACKAGE_OPENOCD_AT91RM),--enable-at91rm9200,--disable-at91rm9200) \
+	$(if $(BR2_PACKAGE_OPENOCD_BCM2835),--enable-bcm2835gpio,--disable-bcm2835gpio) \
+	$(if $(BR2_PACKAGE_OPENOCD_GW16012),--enable-gw16012,--disable-gw16012) \
+	$(if $(BR2_PACKAGE_OPENOCD_PRESTO),--enable-presto_libftdi,--disable-presto_libftdi) \
+	$(if $(BR2_PACKAGE_OPENOCD_OPENJTAG),--enable-openjtag_ftdi,--disable-openjtag_ftdi) \
+	$(if $(BR2_PACKAGE_OPENOCD_BUSPIRATE),--enable-buspirate,--disable-buspirate) \
+	$(if $(BR2_PACKAGE_OPENOCD_SYSFS),--enable-sysfsgpio,--disable-sysfsgpio)
+
+# Enable all configuration options for host build.
+#
+# Note that deprecated options have been removed. CMSIS_DAP needs
+# hidapi (currently not included in buildroot) and zy1000 stuff fails
+# to build, so they've been removed too.
+#
+HOST_OPENOCD_CONF_OPTS = \
+	--enable-ftdi \
+	--enable-stlink \
+	--enable-ti-icdi \
+	--enable-ulink \
+	--enable-usb-blaster-2 \
+	--enable-jlink \
+	--enable-osbdm \
+	--enable-opendous \
+	--enable-aice \
+	--enable-vsllink \
+	--enable-usbprog \
+	--enable-rlink \
+	--enable-armjtagew \
+	--enable-parport \
+	--enable-jtag_vpi \
+	--enable-usb_blaster_libftdi \
+	--enable-amtjtagaccel \
+	--enable-gw16012 \
+	--enable-presto_libftdi \
+	--enable-openjtag_ftdi \
+	--enable-buspirate \
+	--enable-sysfsgpio \
+	--oldincludedir=$(HOST_DIR)/usr/include \
+	--includedir=$(HOST_DIR)/usr/include \
+	--disable-doxygen-html \
+	--with-jim-shared=no \
+	--disable-shared \
+	--enable-dummy \
+	--disable-werror
+
+HOST_OPENOCD_DEPENDENCIES = host-libftdi host-libusb host-libusb-compat
+
+$(eval $(autotools-package))
+$(eval $(host-autotools-package))