Add orangepi zero fex.

projects/sun8i-h2_domo/fex/orangepizero.fex

@@ -1,18 +1,17 @@
 [product]
 version = "100"
-machine = "orangepi-pc-plus-jb"
+machine = "Xunlong Orange Pi Zero"
 
 [platform]
 debug_mode = 1
 eraseflag = 1
 next_work = 3
 secure_without_OS = 1
-secure_bit = 0
 
 [target]
 boot_clock = 1008
-storage_type = 2
+storage_type = -1
-burn_key = 0
+burn_key = 1
 
 [key_detect_en]
 keyen_flag = 0
@@ -25,41 +24,28 @@ fel_key_min = 2
 logical_start = 40960
 sprite_work_delay = 500
 sprite_err_delay = 200
-sprite_gpio0 = port:PL10<1><default><default><default>
+sprite_gpio0 = port:PA17<1><default><default><default>
 next_work = 3
 
 [box_start_os]
 used = 1
 start_type = 1
 irkey_used = 1
-pmukey_used = 1
+pmukey_used = 0
-pmukey_num = 3
+pmukey_num = 0
 led_power = 0
 led_state = 0
 
 [boot_init_gpio]
 used = 1
 gpio0 = port:PL10<1><default><default><1>
-gpio1 = port:PG11<1><default><default><1>
+gpio1 = port:PA17<1><default><default><0>
 
 [recovery_para]
 used = 1
 mode = 2
 recovery_key = port:PL04<0><default><default><default>
 
-[hardware_version]
-hid_used = 0
-hid_count = 3
-hid_bit_0 = port:PD00<0><1><default><default>
-hid_bit_1 = port:PD01<0><1><default><default>
-hid_bit_2 = port:PD02<0><1><default><default>
-
-[hardware_code_table]
-table_count = 3
-table_1 = "1:aliyun_v10"
-table_2 = "7:sys_config"
-table_3 = "0:sys_000"
-
 [pm_para]
 standby_mode = 1
 
@@ -103,8 +89,8 @@ uart_debug_rx = port:PA05<2><1><default><default>
 
 [force_uart_para]
 force_uart_port = 0
-force_uart_tx = port:PF02<3><1><default><default>
+force_uart_tx =
-force_uart_rx = port:PF04<3><1><default><default>
+force_uart_rx =
 
 [jtag_para]
 jtag_enable = 0
@@ -122,16 +108,16 @@ pll_periph1 = 600
 pll_de = 864
 
 [dram_para]
-dram_clk = 624
+dram_clk = 408
 dram_type = 3
 dram_zq = 0x3b3bfb
 dram_odt_en = 1
-dram_para1 = 284427264
+dram_para1 = 283377664
 dram_para2 = 0
-dram_mr0 = 7280
+dram_mr0 = 6208
 dram_mr1 = 64
 dram_mr2 = 24
-dram_mr3 = 0
+dram_mr3 = 2
 dram_tpr0 = 0x48a192
 dram_tpr1 = 0x1c2418d
 dram_tpr2 = 0x76051
@@ -139,13 +125,13 @@ dram_tpr3 = 0x0
 dram_tpr4 = 0x0
 dram_tpr5 = 0x0
 dram_tpr6 = 0x64
-dram_tpr7 = 0x0
+dram_tpr7 = 0x13890240
 dram_tpr8 = 0x0
 dram_tpr9 = 0x0
 dram_tpr10 = 0x0
 dram_tpr11 = 0x6aaa0000
 dram_tpr12 = 0x7979
-dram_tpr13 = 0x1800801
+dram_tpr13 = 0x1802800
 
 [wakeup_src_para]
 cpu_en = 0
@@ -180,31 +166,25 @@ uart_tx = port:PA04<2><1><default><default>
 uart_rx = port:PA05<2><1><default><default>
 
 [uart1]
-uart_used = 0
+uart_used = 1
 uart_port = 1
-uart_type = 4
+uart_type = 2
 uart_tx = port:PG06<2><1><default><default>
 uart_rx = port:PG07<2><1><default><default>
-uart_rts = port:PG08<2><1><default><default>
-uart_cts = port:PG09<2><1><default><default>
 
 [uart2]
-uart_used = 0
+uart_used = 1
 uart_port = 2
-uart_type = 4
+uart_type = 2
 uart_tx = port:PA00<2><1><default><default>
 uart_rx = port:PA01<2><1><default><default>
-uart_rts = port:PA02<2><1><default><default>
-uart_cts = port:PA03<2><1><default><default>
 
 [uart3]
 uart_used = 0
 uart_port = 3
-uart_type = 4
+uart_type = 2
 uart_tx = port:PA13<3><1><default><default>
 uart_rx = port:PA14<3><1><default><default>
-uart_rts = port:PA15<3><1><default><default>
-uart_cts = port:PA16<3><1><default><default>
 
 [spi0]
 spi_used = 1
@@ -215,7 +195,7 @@ spi_sclk = port:PC02<3><default><default><default>
 spi_cs0 = port:PC03<3><1><default><default>
 
 [spi1]
-spi_used = 0
+spi_used = 1
 spi_cs_bitmap = 1
 spi_cs0 = port:PA13<2><1><default><default>
 spi_sclk = port:PA14<2><default><default><default>
@@ -223,7 +203,7 @@ spi_mosi = port:PA15<2><default><default><default>
 spi_miso = port:PA16<2><default><default><default>
 
 [spi_devices]
-spi_dev_num = 1
+spi_dev_num = 2
 
 [spi_board0]
 modalias = "spidev"
@@ -234,51 +214,39 @@ mode = 0
 full_duplex = 1
 manual_cs = 0
 
-[gpio_para]
+[spi_board1]
-gpio_used = 1
+modalias = "spidev"
-gpio_num = 19
+max_speed_hz = 33000000
-gpio_pin_1       = port:PA06<1><default><default><0>
+bus_num = 1
-gpio_pin_2       = port:PA13<1><default><default><0>
+chip_select = 0
-gpio_pin_3       = port:PA14<1><default><default><0>
+mode = 0
-gpio_pin_4       = port:PA01<1><default><default><0>
+full_duplex = 1
-gpio_pin_5       = port:PD14<1><default><default><0>
+manual_cs = 0
-gpio_pin_6       = port:PA00<1><default><default><0>
-gpio_pin_7       = port:PA03<1><default><default><0>
-gpio_pin_8       = port:PC04<1><default><default><0>
-gpio_pin_9       = port:PC07<1><default><default><0>
-gpio_pin_10      = port:PA02<1><default><default><0>
-gpio_pin_11      = port:PA21<1><default><default><0>
-gpio_pin_12      = port:PA07<1><default><default><0>
-gpio_pin_13      = port:PA08<1><default><default><0>
-gpio_pin_14      = port:PG08<1><default><default><0>
-gpio_pin_15      = port:PA09<1><default><default><0>
-gpio_pin_16      = port:PA10<1><default><default><0>
-gpio_pin_17      = port:PG09<1><default><default><0>
-gpio_pin_18      = port:PG06<1><default><default><0>
-gpio_pin_19      = port:PG07<1><default><default><0>
 
-;[led_assign]
+[gpio_para]
-;normal_led = "gpio_pin_2"
+gpio_used = 0
-;standby_led = "gpio_pin_1"
+gpio_num = 2
+gpio_pin_1 = port:PA07<1><default><default><0>
+gpio_pin_2 = port:PA10<1><default><default><0>
 
 [leds_para]
 leds_used = 1
 green_led = port:PL10<1><default><default><1>
 green_led_active_low = 0
-red_led = port:PA15<1><default><default><0>
+red_led = port:PA17<1><default><default><0>
 red_led_active_low = 0
 
 [ths_para]
 ths_used = 1
-ths_trip1_count = 6
+ths_trip1_count = 8
-ths_trip1_0 = 75
+ths_trip1_0 = 65
-ths_trip1_1 = 80
+ths_trip1_1 = 70
-ths_trip1_2 = 85
+ths_trip1_2 = 75
-ths_trip1_3 = 90
+ths_trip1_3 = 80
-ths_trip1_4 = 95
+ths_trip1_4 = 85
-ths_trip1_5 = 105
+ths_trip1_5 = 90
-ths_trip1_6 = 0
+ths_trip1_6 = 95
-ths_trip1_7 = 0
+ths_trip1_7 = 100
 ths_trip1_0_min = 0
 ths_trip1_0_max = 1
 ths_trip1_1_min = 1
@@ -288,51 +256,54 @@ ths_trip1_2_max = 3
 ths_trip1_3_min = 3
 ths_trip1_3_max = 4
 ths_trip1_4_min = 4
-ths_trip1_4_max = 8
+ths_trip1_4_max = 5
-ths_trip1_5_min = 8
+ths_trip1_5_min = 5
-ths_trip1_5_max = 8
+ths_trip1_5_max = 6
-ths_trip1_6_min = 0
+ths_trip1_6_min = 6
-ths_trip1_6_max = 0
+ths_trip1_6_max = 7
 ths_trip2_count = 1
 ths_trip2_0 = 105
 
+;----------------------------------------------------------------------------------
+;cooler_table  cooler_count <=32
+;----------------------------------------------------------------------------------
+
 [cooler_table]
-cooler_count = 9
+cooler_count = 8
-cooler0 = "1296000 4 4294967295 0"
+cooler0 = "1200000 4 4294967295 0"
-cooler1 = "1200000 4 4294967295 0"
+cooler1 = "912000 4 4294967295 0"
-cooler2 = "1008000 4 4294967295 0"
+cooler2 = "768000 4 4294967295 0"
-cooler3 =  "816000 4 4294967295 0"
+cooler3 = "648000 4 4294967295 0"
-cooler4 =  "648000 4 4294967295 0"
+cooler4 = "480000 4 4294967295 0"
-cooler5 =  "480000 4 4294967295 0"
+cooler5 = "480000 3 4294967295 0"
-cooler6 =  "480000 3 4294967295 0"
+cooler6 = "240000 2 4294967295 0"
-cooler7 =  "480000 2 4294967295 0"
+cooler7 = "240000 1 4294967295 0"
-cooler8 =  "480000 1 4294967295 0"
 
 [nand0_para]
 nand_support_2ch = 0
 nand0_used = 0
-nand0_we = port:PC00<2><0><1><default>
+nand0_we = port:PC00<2><default><default><default>
-nand0_ale = port:PC01<2><0><1><default>
+nand0_ale = port:PC01<2><default><default><default>
-nand0_cle = port:PC02<2><0><1><default>
+nand0_cle = port:PC02<2><default><default><default>
-nand0_ce1 = port:PC03<2><1><1><default>
+nand0_ce1 = port:PC03<2><default><default><default>
-nand0_ce0 = port:PC04<2><1><1><default>
+nand0_ce0 = port:PC04<2><default><default><default>
-nand0_nre = port:PC05<2><0><1><default>
+nand0_nre = port:PC05<2><default><default><default>
-nand0_rb0 = port:PC06<2><1><1><default>
+nand0_rb0 = port:PC06<2><default><default><default>
-nand0_rb1 = port:PC07<2><1><1><default>
+nand0_rb1 = port:PC07<2><default><default><default>
-nand0_d0 = port:PC08<2><0><1><default>
+nand0_d0 = port:PC08<2><default><default><default>
-nand0_d1 = port:PC09<2><0><1><default>
+nand0_d1 = port:PC09<2><default><default><default>
-nand0_d2 = port:PC10<2><0><1><default>
+nand0_d2 = port:PC10<2><default><default><default>
-nand0_d3 = port:PC11<2><0><1><default>
+nand0_d3 = port:PC11<2><default><default><default>
-nand0_d4 = port:PC12<2><0><1><default>
+nand0_d4 = port:PC12<2><default><default><default>
-nand0_d5 = port:PC13<2><0><1><default>
+nand0_d5 = port:PC13<2><default><default><default>
-nand0_d6 = port:PC14<2><0><1><default>
+nand0_d6 = port:PC14<2><default><default><default>
-nand0_d7 = port:PC15<2><0><1><default>
+nand0_d7 = port:PC15<2><default><default><default>
-nand0_ndqs = port:PC16<2><0><1><default>
+nand0_ndqs = port:PC16<2><default><default><default>
 
 [boot_disp]
-advert_disp = 0
+advert_disp = 1
 auto_hpd = 1
-output_type = 4
+output_type = 2
 hdmi_channel = 0
 hdmi_mode = 4
 cvbs_channel = 1
@@ -342,11 +313,11 @@ hdmi_mode_check = 1
 
 [disp_init]
 disp_init_enable = 1
-disp_mode = 0
+disp_mode = 1
-screen0_output_type = 3
+screen0_output_type = 2
-screen0_output_mode = 5
+screen0_output_mode = 11
-screen1_output_type = 3
+screen1_output_type = 2
-screen1_output_mode = 5
+screen1_output_mode = 11
 fb0_format = 0
 fb0_width = 0
 fb0_height = 0
@@ -355,25 +326,28 @@ fb1_width = 0
 fb1_height = 0
 
 [hdmi_para]
-hdmi_used = 1
+hdmi_used = 0
 hdmi_power = "vcc-hdmi-18"
 
 [tv_para]
-tv_used = 0
+tv_used = 1
 tv_dac_used = 1
 tv_dac_src0 = 0
 
 [pwm0_para]
 pwm_used = 0
 pwm_positive = port:PA05<3><0><default><default>
-;       If set gamc_phy to use = 2
+
+[pwm1_para]
+pwm_used = 0
+pwm_positive = port:PA06<3><0><default><default>
 
 [gmac0]
 gmac_used = 2
 gmac_power1 =
 
 [csi0]
-vip_used = 1
+vip_used = 0
 vip_mode = 0
 vip_dev_qty = 1
 vip_define_sensor_list = 0
@@ -444,8 +418,8 @@ vip_dev1_flash_mode =
 vip_dev1_af_pwdn =
 
 [tvout_para]
-tvout_used =
+tvout_used = 1
-tvout_channel_num =
+tvout_channel_num = 1
 tv_en =
 
 [tvin_para]
@@ -476,12 +450,12 @@ sdc_power_supply = "none"
 sdc_used = 1
 sdc_detmode = 4
 sdc_buswidth = 4
-sdc_clk = port:PG00<2><1><3><default>
+sdc_clk = port:PG00<2><1><2><default>
-sdc_cmd = port:PG01<2><1><3><default>
+sdc_cmd = port:PG01<2><1><2><default>
-sdc_d0 = port:PG02<2><1><3><default>
+sdc_d0 = port:PG02<2><1><2><default>
-sdc_d1 = port:PG03<2><1><3><default>
+sdc_d1 = port:PG03<2><1><2><default>
-sdc_d2 = port:PG04<2><1><3><default>
+sdc_d2 = port:PG04<2><1><2><default>
-sdc_d3 = port:PG05<2><1><3><default>
+sdc_d3 = port:PG05<2><1><2><default>
 sdc_det =
 sdc_use_wp = 0
 sdc_wp =
@@ -492,7 +466,7 @@ sdc_2xmode = 1
 sdc_ddrmode = 1
 
 [mmc2_para]
-sdc_used = 1
+sdc_used = 0
 sdc_detmode = 3
 sdc_buswidth = 8
 sdc_clk = port:PC05<3><1><2><default>
@@ -516,7 +490,7 @@ sdc_2xmode = 1
 sdc_ddrmode = 1
 
 [smc_para]
-smc_used = 0
+smc_used =
 smc_rst = port:PA09<2><default><default><default>
 smc_vppen = port:PA20<3><default><default><default>
 smc_vppp = port:PA21<3><default><default><default>
@@ -589,23 +563,24 @@ luns = 3
 serial_unique = 0
 
 [module_para]
-module_num = 7
+module_power0 = port:PA20<1><default><default><0>
-module_power0 = "vcc-wifi-33"
+module_power0_vol = 1
-module_power0_vol = 0
 module_power1 =
 module_power1_vol =
 module_power2 =
 module_power2_vol =
 module_power3 =
 module_power3_vol =
+module_select_pin0 =
+module_select_pin1 =
 chip_en =
 lpo_use_apclk = "losc_out"
 
 [wifi_para]
 wifi_used = 1
 wifi_sdc_id = 1
-wifi_usbc_id = 3
+wifi_usbc_id = 
-wifi_usbc_type = 1
+wifi_usbc_type = 
 wl_reg_on = port:PL07<1><default><default><0>
 wl_host_wake = port:PG10<0><default><default><0>
 wl_host_wake_invert = 0
@@ -613,10 +588,9 @@ wl_host_wake_invert = 0
 [bt_para]
 bt_used = 0
 bt_uart_id = 1
-bt_uart_baud = 1500000
+bt_rst_n =
-bt_rst_n = port:PA13<1><default><default><0>
+bt_wake =
-bt_wake = port:PG12<1><default><default><0>
+bt_host_wake =
-bt_host_wake = port:PL06<0><default><default><0>
 bt_host_wake_invert = 0
 
 [pcm0]
@@ -675,7 +649,7 @@ adcdrc_used = 0
 dacdrc_used = 0
 adchpf_used = 0
 dachpf_used = 0
-audio_pa_ctrl = port:PA16<1><default><default><0>
+audio_pa_ctrl = port:PA10<1><default><default><0>
 
 [spdif0]
 spdif_used = 0
@@ -685,44 +659,49 @@ spdif_dout = port:PA17<2><1><default><default>
 hub_used = 0
 codec_used = 1
 spdif_used = 1
-hdmi_used = 1
+hdmi_used = 0
 
 [s_cir0]
 ir_used = 1
 ir_rx = port:PL11<2><1><default><default>
-ir_power_key_code0 = 87
+ir_power_key_code0  = 0x00
-ir_addr_code0 = 40704
+ir_addr_code0       = 0xC43B
-ir_power_key_code1 = 26
+ir_power_key_code1  = 0x08
-ir_addr_code1 = 64260
+ir_addr_code1       = 0xC43B
-ir_power_key_code2 = 20
+ir_power_key_code2  = 0x1A
-ir_addr_code2 = 32640
+ir_addr_code2       = 0xC43B
-ir_power_key_code3 = 21
+ir_power_key_code3  = 0x0A
-ir_addr_code3 = 32640
+ir_addr_code3       = 0xC43B
-ir_power_key_code4 = 11
+ir_power_key_code4  = 0x0D
-ir_addr_code4 = 63240
+ir_addr_code4       = 0xC43B
-ir_power_key_code5 = 3
+ir_power_key_code5  = 0x10
-ir_addr_code5 = 239
+ir_addr_code5       = 0xC43B
-ir_power_key_code6 = 159
+ir_power_key_code6  = 0x11
-ir_addr_code6 = 19635
+ir_addr_code6       = 0xC43B
-ir_power_key_code7 = 10
+ir_power_key_code7  = 0x12
-ir_addr_code7 = 30536
+ir_addr_code7       = 0xC43B
-ir_power_key_code8 = 69
+ir_power_key_code8  = 0x15
-ir_addr_code8 = 48386
+ir_addr_code8       = 0xC43B
-ir_power_key_code9 = 77
+ir_power_key_code9  = 0x0E
-ir_addr_code9 = 56865
+ir_addr_code9       = 0xC43B
-ir_power_key_code10 = 24
+ir_power_key_code10  = 0x16
-ir_addr_code10 = 65025
+ir_addr_code10       = 0xC43B
-ir_power_key_code11 = 87
+ir_power_key_code11  = 0x0C
-ir_addr_code11 = 65280
+ir_addr_code11       = 0xC43B
-ir_power_key_code12 = 77
+ir_power_key_code12  = 0x51
-ir_addr_code12 = 65344
+ir_addr_code12       = 0xC43B
-ir_power_key_code13 = 136
+ir_power_key_code13  = 0x14
-ir_addr_code13 = 56610
+ir_addr_code13       = 0xC43B
+ir_power_key_code14  = 0x50
+ir_addr_code15       = 0xC43B
 
 [cir]
-ir_used = 1
+ir_used = 0
 ir_tx = port:PH07<2><default><default><default>
 
+[ls_para]
+ls_used = 0
+
 ;----------------------------------------------------------------------------------
 ; dvfs voltage-frequency table configuration
 ;
@@ -747,29 +726,27 @@ ir_tx = port:PH07<2><default><default><default>
 ; LV8: core vdd is 1.04v if cpu frequency is (0Mhz,      648Mhz]
 ;
 ;----------------------------------------------------------------------------------
+
 [dvfs_table]
-pmuic_type = 2
+pmuic_type = 1
 pmu_gpio0 = port:PL06<1><1><2><1>
 pmu_level0 = 11300
 pmu_level1 = 1100
-extremity_freq = 1296000000
 max_freq = 1200000000
-min_freq = 480000000
+min_freq = 240000000
-LV_count = 7
+LV_count = 6
-LV1_freq = 1296000000
+LV1_freq = 1200000000
-LV1_volt = 1320
+LV1_volt = 1300
-LV2_freq = 1200000000
+LV2_freq = 1008000000
-LV2_volt = 1240
+LV2_volt = 1300
-LV3_freq = 1104000000
+LV3_freq = 912000000
-LV3_volt = 1180
+LV3_volt = 1100
-LV4_freq = 1008000000
+LV4_freq = 648000000
-LV4_volt = 1140
+LV4_volt = 1100
-LV5_freq = 960000000
+LV5_freq = 480000000
-LV5_volt = 1080
+LV5_volt = 1100
-LV6_freq = 816000000
+LV6_freq = 240000000
-LV6_volt = 1020
+LV6_volt = 1100
-LV7_freq = 480000000
-LV7_volt = 980
 
 [gpu_dvfs_table]
 G_LV_count = 3
@@ -782,7 +759,7 @@ G_LV2_volt = 1200000
 
 [board_vendor]
 vid_used = 0
-vid_count = 0
+vid_count = 6
 vid_bit_0 = port:PD16<0><1><default><default>
 vid_bit_1 = port:PD15<0><1><default><default>
 vid_bit_2 = port:PD14<0><1><default><default>
@@ -817,14 +794,6 @@ s_powchk_used = -2147483648
 s_power_reg = 0
 s_system_power = 50
 
-[sim0]
-scr_used = 0
-scr_vccen = port:PA06<2><default><default><default>
-scr_slk = port:PA07<2><default><default><default>
-scr_sda = port:PA08<2><default><default><default>
-scr_rst = port:PA09<2><default><default><default>
-scr_det = port:PA10<2><default><default><default>
-
 [ts0]
 tsc_used = 0
 tsc_clk = port:PE00<3><default><default><default>
@@ -841,7 +810,7 @@ tsc_d6 = port:PE10<3><default><default><default>
 tsc_d7 = port:PE11<3><default><default><default>
 
 [gpio_power_key]
-key_used = 1
+key_used = 0
 key_io = port:PL03<6><default><default><0>
 
 [key_para]
@@ -869,14 +838,11 @@ mali_extreme_freq = 600
 mali_extreme_vol = 1400
 
 ;----------------------------------------------------------------------------------
-;1wire parameters (default - PA20)
+;1wire parameters (default - PA10 / pin 26) -- PA20 not available here
 ;----------------------------------------------------------------------------------
 [w1_para]
 w1_used = 1
-gpio = 20
+gpio = 10
 
 [corekeeper]
 corekeeper_enabled = 1
-
-[dynamic]
-MAC = "001BA0150FAF"