rpi/domo
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Bump buildroot to version 2017-02

Browse Source 
TG-3 #closed
This commit is contained in:
jbnadal
2017-03-28 18:29:16 +02:00
parent 93b7fd91d2
commit 42c92a6bcb
3010 changed files with 41289 additions and 46428 deletions
Download Patch File Download Diff File Expand all files Collapse all files

35
bsp/buildroot/board/acmesystems/aria-g25/genimage.cfg Normal file
View File

@@ -0,0 +1,35 @@
# Minimal SD card image for the Acmesystems Aria G25
image boot.vfat {
vfat {
file zImage {
image = "zImage"
}
file at91-ariag25.dtb {
image = "at91-ariag25.dtb"
}
file boot.bin {
image = "at91sam9x5_aria-sdcardboot-linux-zimage-dt-3.8.6.bin"
}
}
size = 16M
}
image sdcard.img {
hdimage {
}
partition boot {
partition-type = 0xC
bootable = "true"
image = "boot.vfat"
}
partition rootfs {
partition-type = 0x83
image = "rootfs.ext4"
size = 512M
}
}

14
bsp/buildroot/board/acmesystems/aria-g25/post-image.sh Executable file
View File

@@ -0,0 +1,14 @@
#!/bin/sh
BOARD_DIR="$(dirname $0)"
GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
rm -rf "${GENIMAGE_TMP}"
genimage \
--rootpath "${TARGET_DIR}" \
--tmppath "${GENIMAGE_TMP}" \
--inputpath "${BINARIES_DIR}" \
--outputpath "${BINARIES_DIR}" \
--config "${GENIMAGE_CFG}"

69
bsp/buildroot/board/acmesystems/aria-g25/readme.txt
View File

@@ -1,51 +1,44 @@
Acme Systems Aria G25
Build instructions
==================
As a regular user configure and then build:
To build an image for the Aria G25 choose the configuration
corresponding to the Aria variant.
$ make acmesystems_aria_g25_128mb_defconfig (128MB RAM variant)
or...
$ make acmesystems_aria_g25_256mb_defconfig (256MB RAM variant)
For 128MB RAM variant type:
$ make acmesystems_aria_g25_128mb_defconfig
else for 256MB RAM variant type:
$ make acmesystems_aria_g25_256mb_defconfig
To customize the configuration choosed type:
$ make menuconfig
When you are ready to start building Buildroot type:
$ make
Writing to the MicroSD card
===========================
How to write the microSD card
=============================
Assuming your Aria G25 baseboard has a MicroSD socket, for example with
the Terra baseboard, you'll need a blank MicroSD (obviously) initialized
in a particular way to be able to boot from it.
Once the build process is finished you will have an image called
"sdcard.img" in the output/images/ directory.
Assuming the card is seen as /dev/sdb in your PC/laptop/other device
you'll need to run the following commands as root or via sudo.
Write the bootable SD card image "sdcard.img" onto an SD card with
"dd" command:
Make sure all of the card partitions are unmounted before starting.
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
First we'll need to create two partitions:
Assuming your Aria G25 baseboard has a MicroSD socket, for example
with the Terra baseboard, insert the microSD card into the baseboard
slot and power it.
# sfdisk -uM /dev/sdb <<EOF
,32,6
;
EOF
Then we'll need to create the empty filesystems:
# mkdosfs -n SD_BOOT /dev/sdb1
# mkfs.ext4 -L SD_ROOT /dev/sdb2
We'll populate the first partition (boot) with the relevant files:
# mount /dev/sdb1 /mnt
# cp output/images/at91bootstrap.bin /mnt/BOOT.BIN
# cp output/images/zImage /mnt
# cp output/images/at91-ariag25.dtb /mnt
# umount /mnt
And the root filesystem afterwards:
# mount /dev/sdb2 /mnt
# tar -C /mnt output/images/rootfs.tar
# umount /mnt
You're done, insert the MicroSD card in the slot and enjoy.
To get the kernel log messages you can use a DPI cable
(http://www.acmesystems.it/DPI)
You can find additional informations, tutorials and a very
comprehensive documentation on http://www.acmesystems.it/aria.

12
bsp/buildroot/board/acmesystems/arietta-g25/genimage.cfg
View File

@@ -1,18 +1,18 @@
# Minimal SD card image for the Acmesystems Arietta G25
#
image boot.vfat {
vfat {
file zImage {
image = "zImage"
}
file acme-arietta.dtb {
image = "at91-ariag25.dtb"
image = "at91-ariettag25.dtb"
}
file boot.bin {
image = "at91sam9x5_arietta-sdcardboot-linux-zimage-dt-3.7.bin"
}
image = "at91sam9x5_arietta-sdcardboot-linux-zimage-dt-3.8.6.bin"
}
}
size = 16M
}

4
bsp/buildroot/board/acmesystems/arietta-g25/post-image.sh
View File

@@ -6,11 +6,9 @@ GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
rm -rf "${GENIMAGE_TMP}"
genimage \
genimage \
--rootpath "${TARGET_DIR}" \
--tmppath "${GENIMAGE_TMP}" \
--inputpath "${BINARIES_DIR}" \
--outputpath "${BINARIES_DIR}" \
--config "${GENIMAGE_CFG}"
exit $?

14
bsp/buildroot/board/acmesystems/arietta-g25/readme.txt
View File

@@ -1,4 +1,4 @@
Acmesystems Arietta G25
Acme Systems Arietta G25
Intro
=====
@@ -13,8 +13,8 @@ documentation on http://www.acmesystems.it/arietta.
Build instructions
==================
To build an image for the arietta g25 choose the configuration
corresponding to the arietta variant.
To build an image for the Arietta G25 choose the configuration
corresponding to the Arietta variant.
For 128MB RAM variant type:
@@ -24,7 +24,11 @@ else for 256MB RAM variant type:
$ make acmesystems_arietta_g25_256mb_defconfig
then:
To customize the configuration chosen type:
$ make menuconfig
When you are ready to start building Buildroot type:
$ make
@@ -38,7 +42,7 @@ Copy the bootable "sdcard.img" onto an SD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
Insert the microSD card into the arietta slot and power it.
Insert the microSD card into the Arietta slot and power it.
The image just built is fairly basic and the only output
you will get is on serial console, please consider to use a DPI