Bump buildroot to version 2017-02

TG-3 #closed

bsp/buildroot/board/arm/juno/readme.txt

@@ -8,8 +8,8 @@ These instructions apply to all models of the ARM Juno:
   - Juno r1 (supports PCIe)
   - Juno r2 (Big Cluster with A72)
 
-Buildroot will generate the kernel image, device tree blob and a
-minimal root filesystem.
+Buildroot will generate the kernel image, device tree blob, bootloader binaries
+and a minimal root filesystem.
 
 How to build it
 ===============
@@ -44,6 +44,20 @@ After building, you should obtain this tree:
     +-- juno-r1.dtb (if Juno r1 is used)
     +-- juno-r2.dtb (if Juno r2 is used)
     +-- Image
+    +-- bl1.bin
+    +-- bl2.bin
+    +-- bl2u.bin
+    +-- bl31.bin
+    +-- fip.bin
+    +-- scp-fw.bin
+    +-- u-boot.bin
+
+Preparing your rootfs
+======================
+
+Format your pen drive as a ext3 filesystem by executing:
+
+   $ mkfs.ext3 /dev/<your device>
 
 Preparing your rootfs
 ======================
@@ -113,7 +127,8 @@ Installing kernel image and DTB
 3. Open the software/ folder
 4. Copy the 'Image' file to software/
 5. Copy the 'juno-r1.dtb' (r1), 'juno.dtb' (r0) or juno-r2.dtb (r2) file to software/
-6. Press the red button in the front pannel of ARM Juno
+6. Copy the bootloader binaries (bl1.bin and fip.bin) to software/
+7. Press the red button in the front pannel of ARM Juno
 
 At this time, the board will erase the Flash entry for each new item and
 replace it with the lastest ones.