Bump buildroot to version 2017-02

TG-3 #closed
This commit is contained in:
jbnadal
2017-03-28 18:29:16 +02:00
parent 93b7fd91d2
commit 42c92a6bcb
3010 changed files with 41289 additions and 46428 deletions

View File

@@ -0,0 +1,31 @@
# Minimal microSD card image for Grinn's chiliBoard
#
image boot.vfat {
vfat {
files = {
"MLO",
"u-boot.img",
"am335x-chiliboard.dtb",
"zImage"
}
}
size = 16M
}
image sdcard.img {
hdimage {
}
partition u-boot {
partition-type = 0xC
bootable = "true"
image = "boot.vfat"
offset = 1M
}
partition rootfs {
partition-type = 0x83
image = "rootfs.ext4"
}
}

View File

@@ -0,0 +1,14 @@
#!/usr/bin/env bash
BOARD_DIR="$(dirname $0)"
GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
rm -rf "${GENIMAGE_TMP}"
genimage \
--rootpath "${TARGET_DIR}" \
--tmppath "${GENIMAGE_TMP}" \
--inputpath "${BINARIES_DIR}" \
--outputpath "${BINARIES_DIR}" \
--config "${GENIMAGE_CFG}"

View File

@@ -0,0 +1,46 @@
**********
chiliBoard
**********
Build
=====
First, configure Buildroot for your chiliBoard:
make grinn_chiliboard_defconfig
Build image:
make
After building you should get a tree like this:
output/images/
├── am335x-chiliboard.dtb
├── boot.vfat
├── MLO
├── rootfs.ext2
├── rootfs.ext4
├── rootfs.tar
├── sdcard.img
├── u-boot.img
└── zImage
Create a bootable microSD card
==============================
Buildroot prepares a bootable microSD card image "sdcard.img" in output/images/
directory, To flash SD card just run the following command:
sudo dd if=output/images/sdcard.img of=/dev/<sd_card> bs=1M
where <sd_card> can be sdX or mmcblkX
*** WARNING! This will destroy all contents of device you specify! ***
Boot chiliBoard
===============
- insert the microSD card in the microSD slot of the board;
- plug micro USB cable to provide power and console interface
- use terminal emulator with 115200 bps, 8n1