rpi/domo
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Bump buildroot to version 2017-02

Browse Source 
TG-3 #closed
This commit is contained in:
jbnadal
2017-03-28 18:29:16 +02:00
parent 93b7fd91d2
commit 42c92a6bcb
3010 changed files with 41289 additions and 46428 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
bsp/buildroot/board/raspberrypi/genimage-raspberrypi.cfg
View File

@@ -9,7 +9,7 @@ image boot.vfat {
"rpi-firmware/config.txt",
"rpi-firmware/fixup.dat",
"rpi-firmware/start.elf",
"kernel-marked/zImage"
"zImage"
}
}
size = 32M

2
bsp/buildroot/board/raspberrypi/genimage-raspberrypi0.cfg
View File

@@ -7,7 +7,7 @@ image boot.vfat {
"rpi-firmware/config.txt",
"rpi-firmware/fixup.dat",
"rpi-firmware/start.elf",
"kernel-marked/zImage"
"zImage"
}
}
size = 32M

2
bsp/buildroot/board/raspberrypi/genimage-raspberrypi2.cfg
View File

@@ -7,7 +7,7 @@ image boot.vfat {
"rpi-firmware/config.txt",
"rpi-firmware/fixup.dat",
"rpi-firmware/start.elf",
"kernel-marked/zImage"
"zImage"
}
}
size = 32M

3
bsp/buildroot/board/raspberrypi/genimage-raspberrypi3.cfg
View File

@@ -7,7 +7,8 @@ image boot.vfat {
"rpi-firmware/config.txt",
"rpi-firmware/fixup.dat",
"rpi-firmware/start.elf",
"kernel-marked/zImage"
"rpi-firmware/overlays",
"zImage"
}
}
size = 32M

16
bsp/buildroot/board/raspberrypi/post-image.sh
View File

@@ -5,10 +5,18 @@ BOARD_NAME="$(basename ${BOARD_DIR})"
GENIMAGE_CFG="${BOARD_DIR}/genimage-${BOARD_NAME}.cfg"
GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
# Mark the kernel as DT-enabled
mkdir -p "${BINARIES_DIR}/kernel-marked"
${HOST_DIR}/usr/bin/mkknlimg "${BINARIES_DIR}/zImage" \
"${BINARIES_DIR}/kernel-marked/zImage"
case "${2}" in
--add-pi3-miniuart-bt-overlay)
if ! grep -qE '^dtoverlay=' "${BINARIES_DIR}/rpi-firmware/config.txt"; then
echo "Adding 'dtoverlay=pi3-miniuart-bt' to config.txt (fixes ttyAMA0 serial console)."
cat << __EOF__ >> "${BINARIES_DIR}/rpi-firmware/config.txt"
# fixes rpi3 ttyAMA0 serial console
dtoverlay=pi3-miniuart-bt
__EOF__
fi
;;
esac
rm -rf "${GENIMAGE_TMP}"

13
bsp/buildroot/board/raspberrypi/readme.txt
View File

@@ -22,6 +22,10 @@ For models A, B, A+ or B+:
$ make raspberrypi_defconfig
For model Zero (model A+ in smaller form factor):
$ make raspberrypi0_defconfig
For model 2 B:
$ make raspberrypi2_defconfig
@@ -53,21 +57,24 @@ After building, you should obtain this tree:
+-- bcm2709-rpi-2-b.dtb [1]
+-- bcm2710-rpi-3-b.dtb [1]
+-- boot.vfat
+-- kernel-marked/zImage [2]
+-- rootfs.ext4
+-- rpi-firmware/
| +-- bootcode.bin
| +-- cmdline.txt
| +-- config.txt
| +-- fixup.dat
| `-- start.elf
| +-- start.elf
| `-- overlays/ [2]
+-- sdcard.img
`-- zImage
[1] Not all of them will be present, depending on the RaspberryPi
model you are using.
[2] This is the mkknlimg DT-marked kernel.
[2] Only for the Raspberry Pi 3 Model (overlay pi3-miniuart-bt is needed
to enable the RPi3 serial console otherwise occupied by the bluetooth
chip). Alternative would be to disable the serial console in cmdline.txt
and /etc/inittab.
How to write the SD card
========================