pi Domo is now compiling

projects/pi_domo/uboot/boot.cmd

@@ -0,0 +1,8 @@
+mmc dev 0
+fatload mmc 0:1 ${kernel_addr_r} zImage
+fatload mmc 0:1 ${fdt_addr_r} bcm2708-rpi-b-plus.dtb
+fatload mmc 0:1 ${ramdisk_addr_r} rootfs.cpio.uboot
+setenv mmc_freq 'sdhci-bcm2708.emmc_clock_freq=250000000 sdhci-bcm2708.enable_llm=0'
+setenv bootargs ${mmc_freq} console=ttyAMA0,115200
+bootz ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
+#smsc95xx.macaddr=${ethaddr}

projects/pi_domo/uboot/dev.cmd

@@ -0,0 +1,9 @@
+usb start
+mmc dev 0
+fatload mmc 0:1 ${kernel_addr_r} zImage
+fatload mmc 0:1 ${fdt_addr_r} pi_QuartetIII.dtb
+dhcp ${ramdisk_addr_r} rootfs.cpio.uboot
+setenv mmc_freq 'sdhci-bcm2708.emmc_clock_freq=250000000 sdhci-bcm2708.enable_llm=0'
+setenv usb_args 'dwc_otg.lpm_enable=0 dwc_otg.speed=1 dwc_otg.fiq_fix_enable=1'
+setenv bootargs ${usb_args} ${mmc_freq} console=ttyAMA0,115200
+bootz ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}

projects/pi_domo/uboot/uEnv.txt

@@ -0,0 +1,33 @@
+arch=arm
+baudrate=115200
+board=rpi
+board_name=Model B+
+board_rev=0x10
+board_rev_scheme=0
+board_revision=0x10
+stderr=serial
+stdin=serial
+stdout=serial
+boot_prefixes=/ /boot/
+boot_scripts=boot.scr boot.scr.uimg
+boot_targets=fel mmc0 mmc1
+bootcmd=run distro_bootcmd
+distro_bootcmd=for target in ${boot_targets}; do run bootcmd_${target}; done
+bootcmd_fel=if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then echo '(FEL boot)'; source ${fel_scriptaddr}; fi
+bootcmd_mmc0=setenv devnum 0; run mmc_boot
+bootcmd_mmc1=setenv devnum 1; run mmc_boot
+mmc_boot=if mmc dev ${devnum}; then setenv devtype mmc; run scan_dev_for_boot_part; fi
+scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then run scan_dev_for_boot; fi; done
+scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_scripts; done;
+scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done
+boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr}
+console=ttyS0,115200
+scriptaddr=0x43100000
+fdt_addr_r=0x43000000
+kernel_addr_r=0x42000000
+ramdisk_addr_r=0x43300000
+dev=run dev_boot
+dev_boot=mmc dev 0; fatload mmc 0:1 ${scriptaddr} dev.scr; source ${scriptaddr}
+update=run update_scr
+update_scr=mmc dev 0; fatload mmc 0:1 ${scriptaddr} update.scr; source ${scriptaddr}
+is_configured=0

projects/pi_domo/uboot/update.cmd

@@ -0,0 +1,9 @@
+usb start
+dhcp ${kernel_addr_r} zImage
+fatwrite mmc 0:1 ${fileaddr} zImage ${filesize}
+tftp ${fdt_addr_r} bcm2708-rpi-b.dtb
+fatwrite mmc 0:1 ${fileaddr} bcm2708-rpi-b-plus.dtb ${filesize}
+tftp ${ramdisk_addr_r} rootfs.cpio.uboot
+fatwrite mmc 0:1 ${fileaddr} rootfs.cpio.uboot ${filesize}
+setenv bootargs console=ttyAMA0,115200
+bootz ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}