Import buildroot 2016.02.01

2016-02-24 22:35:39 +01:00
parent a6ee09dea4
commit 828befcf3c
7393 changed files with 390887 additions and 0 deletions
--- a/firmware/buildroot/board/olimex/a20_olinuxino/boot-mali.cmd
+++ b/firmware/buildroot/board/olimex/a20_olinuxino/boot-mali.cmd
@@ -0,0 +1,5 @@
+setenv bootm_boot_mode sec
+setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait panic=10 sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_no_mali_mem_reserve sunxi_fb_mem_reserve=16 consoleblank=0 ${extra}
+ext4load mmc 0 0x43000000 /boot/script.bin
+ext4load mmc 0 0x48000000 /boot/zImage
+bootz 0x48000000
--- a/firmware/buildroot/board/olimex/a20_olinuxino/boot.cmd
+++ b/firmware/buildroot/board/olimex/a20_olinuxino/boot.cmd
@@ -0,0 +1,5 @@
+setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait panic=10 ${extra}
+ext4load mmc 0 0x49000000 /boot/${fdtfile}
+ext4load mmc 0 0x46000000 /boot/zImage
+env set fdt_high ffffffff
+bootz 0x46000000 - 0x49000000
--- a/firmware/buildroot/board/olimex/a20_olinuxino/post-build.sh
+++ b/firmware/buildroot/board/olimex/a20_olinuxino/post-build.sh
@@ -0,0 +1,12 @@
+#!/bin/sh
+# args from BR2_ROOTFS_POST_SCRIPT_ARGS
+# $2    path of boot.cmd
+# $3    output directory for boot.scr
+
+MKIMAGE=$HOST_DIR/usr/bin/mkimage
+
+$MKIMAGE -A arm -O linux -T script -C none -d $2 $3/boot.scr
+
+if [ -e $BINARIES_DIR/script.bin ]; then
+	cp $BINARIES_DIR/script.bin $3/script.bin
+fi
--- a/firmware/buildroot/board/olimex/a20_olinuxino/readme.txt
+++ b/firmware/buildroot/board/olimex/a20_olinuxino/readme.txt
@@ -0,0 +1,116 @@
+A20-OLinuXino-LIME and A20-OLinuXino-MICRO
+
+Intro
+=====
+
+These are open hardware boards, both based an the AllWinners A20 SoC.
+
+for more details about the boards see the following pages:
+ - https://www.olimex.com/Products/OLinuXino/open-source-hardware
+ - https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXino-MICRO/
+ - https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXino-LIME/
+
+The following defconfigs are available:
+ - olimex_a20_olinuxino_micro_defconfig
+   for the A20-OLinuXino-MICRO board using mainline kernel
+ - olimex_a20_olinuxino_lime_defconfig
+   for the A20-OLinuXino-LIME board using mainline kernel
+ - olimex_a20_olinuxino_lime_mali_defconfig
+   for the A20-OLinuXino-LIME board using legacy linux-sunxi kernel
+ - olimex_a20_olinuxino_lime2_defconfig
+   for the A20-OLinuXino-LIME2 board using mainline kernel
+
+The legacy linux-sunxi kernels are based on the vendor code drops.
+They are only useful when accelerated 3D graphics and multimedia support
+is strictly necessary.
+
+The Mainline Kernel is already a much better choice for a headless server.
+And also the mainline kernel works fine even for a basic Linux desktop
+system running on top of a simple framebuffer, which may be good enough for
+the users who do not need fancy 3D graphics or video playback acceleration.
+
+(see http://linux-sunxi.org/Linux_Kernel for more details)
+
+How to build it
+===============
+
+Configure Buildroot:
+
+    $ make <board>_defconfig
+
+Compile everything and build the rootfs image:
+
+    $ make
+
+Result of the build
+-------------------
+
+After building, you should get a tree like this:
+
+    output/images/
+    +-- rootfs.ext2
+    +-- rootfs.ext4 -> rootfs.ext2
+    +-- script.bin (lime_mali)
+    +-- sun7i-a20-olinuxino-lime.dtb (lime, mainline)
+    +-- sun7i-a20-olinuxino-lime2.dtb (lime2, mainline)
+    +-- sun7i-a20-olinuxino-micro.dtb (micro, mainline)
+    +-- u-boot.bin
+    +-- u-boot-sunxi-with-spl.bin
+    `-- zImage
+
+
+How to write the SD card
+========================
+
+
+Prepare the SD card
+-------------------
+
+Erase existing stuff, and create an unique Linux partition with `fdisk`.
+
+    # fdisk /dev/sdX
+    Command (m for help): o
+    Building a new DOS disklabel with disk identifier 0xf9e1616a.
+    Changes will remain in memory only, until you decide to write them.
+    After that, of course, the previous content won't be recoverable.
+
+    Command (m for help): n
+    Partition type:
+        p   primary (0 primary, 0 extended, 4 free)
+        e   extended
+    Select (default p): p
+    Partition number (1-4, default 1): 1
+    First sector (2048-7626751, default 2048): 2048
+    Last sector, +sectors or +size{K,M,G} (2048-7626751, default 7626751): 
+    Using default value 7626751
+
+    Command (m for help): p
+
+    Disk /dev/sdX: 3904 MB, 3904897024 bytes
+    4 heads, 16 sectors/track, 119168 cylinders, total 7626752 sectors
+    Units = sectors of 1 * 512 = 512 bytes
+    Sector size (logical/physical): 512 bytes / 512 bytes
+    I/O size (minimum/optimal): 512 bytes / 512 bytes
+    Disk identifier: 0xf9e1616a
+
+            Device Boot      Start         End      Blocks   Id  System
+    /dev/sdX1                 2048     7626751     3812352   83  Linux
+
+    Command (m for help): w
+    The partition table has been altered!
+
+    Calling ioctl() to re-read partition table.
+    Syncing disks.
+
+Copy images on the SD card
+--------------------------
+
+    # dd if=output/images/rootfs.ext2 of=/dev/sdX1
+    # dd if=output/images/u-boot-sunxi-with-spl.bin of=/dev/sdX bs=1024 seek=8
+
+
+Finish
+======
+
+Eject the SD card, insert it in the A20-OLinuXino board, and power it up.
+
--- a/firmware/buildroot/board/olimex/imx233_olinuxino/linux-3.18.config
+++ b/firmware/buildroot/board/olimex/imx233_olinuxino/linux-3.18.config
@@ -0,0 +1,152 @@
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PERF_EVENTS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_BLK_DEV_INTEGRITY=y
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_MXS=y
+# CONFIG_ARM_THUMB is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_AEABI=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_CMDLINE="console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait"
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_SYN_COOKIES=y
+CONFIG_CFG80211=y
+CONFIG_CFG80211_WEXT=y
+CONFIG_MAC80211=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_SST25L=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_GPMI_NAND=y
+CONFIG_MTD_UBI=y
+# CONFIG_BLK_DEV is not set
+CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_93CX6=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+# CONFIG_ETHERNET is not set
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_RTL8187=m
+CONFIG_ATH_CARDS=m
+CONFIG_ATH9K_HTC=m
+CONFIG_RT2X00=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_RT55XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RTL_CARDS=m
+CONFIG_RTL8192CU=m
+# CONFIG_RTLWIFI_DEBUG is not set
+CONFIG_ZD1211RW=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_MXS_AUART=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MXS=y
+CONFIG_SPI=y
+CONFIG_SPI_GPIO=m
+CONFIG_SPI_MXS=y
+CONFIG_PTP_1588_CLOCK=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_STMP3XXX_RTC_WATCHDOG=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_FB=y
+CONFIG_FB_MXS=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_HRTIMER=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_MXS_PHY=y
+CONFIG_MMC=y
+CONFIG_MMC_MXS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_STMP=y
+CONFIG_DMADEVICES=y
+CONFIG_MXS_DMA=y
+CONFIG_STAGING=y
+CONFIG_MXS_LRADC=y
+CONFIG_IIO=y
+CONFIG_IIO_SYSFS_TRIGGER=y
+CONFIG_PWM=y
+CONFIG_PWM_MXS=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_FRAME_WARN=2048
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_DEBUG_USER=y
+CONFIG_KEYS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_MXS_DCP=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC7=m
+CONFIG_FONTS=y
--- a/firmware/buildroot/board/olimex/imx233_olinuxino/mxs-bootlets/mxs-bootlets-01-olinuxino.patch
+++ b/firmware/buildroot/board/olimex/imx233_olinuxino/mxs-bootlets/mxs-bootlets-01-olinuxino.patch
@@ -0,0 +1,122 @@
+Forward-ported patch from https://github.com/koliqi/imx23-olinuxino
+for mxs-bootlets-10.12.01
+
+Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
+
+diff -Nura imx-bootlets-src-10.12.01/linux_prep/board/imx23_olinuxino_dev.c imx-bootlets-src-10.12.01-olinuxino/linux_prep/board/imx23_olinuxino_dev.c
+--- imx-bootlets-src-10.12.01/linux_prep/board/imx23_olinuxino_dev.c	1969-12-31 21:00:00.000000000 -0300
+++ imx-bootlets-src-10.12.01-olinuxino/linux_prep/board/imx23_olinuxino_dev.c	2013-05-17 15:07:33.282961551 -0300
+@@ -0,0 +1,54 @@
+/*
+ * Platform specific data for the IMX23_OLINUXINO development board
+ *
+ * Fadil Berisha <fadil.r.berisha@gmail.com>
+ *
+ * Copyright 2008 SigmaTel, Inc
+ * Copyright 2008 Embedded Alley Solutions, Inc
+ * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <setup.h>
+#include <keys.h>
+#include <lradc_buttons.h>
+
+/************************************************
+ * LRADC keyboard data *
+ ************************************************/
+int lradc_keypad_ch = LRADC_CH0;
+int lradc_vddio_ch = LRADC_CH6;
+
+struct lradc_keycode lradc_keycodes[] = {
+ { 100, KEY4 },
+ { 306, KEY5 },
+ { 601, KEY6 },
+ { 932, KEY7 },
+ { 1260, KEY8 },
+ { 1424, KEY9 },
+ { 1707, KEY10 },
+ { 2207, KEY11 },
+ { 2525, KEY12 },
+ { 2831, KEY13 },
+ { 3134, KEY14 },
+ { -1, 0 },
+};
+
+/************************************************
+ * Magic key combinations for Armadillo *
+ ************************************************/
+u32 magic_keys[MAGIC_KEY_NR] = {
+ [MAGIC_KEY1] = KEY4,
+ [MAGIC_KEY2] = KEY6,
+ [MAGIC_KEY3] = KEY10,
+};
+
+/************************************************
+ * Default command line *
+ ************************************************/
+char cmdline_def[] = "console=ttyAMA0,115200";
+diff -Nura imx-bootlets-src-10.12.01/linux_prep/cmdlines/imx23_olinuxino_dev.txt imx-bootlets-src-10.12.01-olinuxino/linux_prep/cmdlines/imx23_olinuxino_dev.txt
+--- imx-bootlets-src-10.12.01/linux_prep/cmdlines/imx23_olinuxino_dev.txt	1969-12-31 21:00:00.000000000 -0300
+++ imx-bootlets-src-10.12.01-olinuxino/linux_prep/cmdlines/imx23_olinuxino_dev.txt	2013-05-17 15:07:49.663496106 -0300
+@@ -0,0 +1,3 @@
+console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait
+console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait
+console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait
+diff -Nura imx-bootlets-src-10.12.01/linux_prep/core/setup.c imx-bootlets-src-10.12.01-olinuxino/linux_prep/core/setup.c
+--- imx-bootlets-src-10.12.01/linux_prep/core/setup.c	2010-11-04 04:35:38.000000000 -0300
+++ imx-bootlets-src-10.12.01-olinuxino/linux_prep/core/setup.c	2013-05-17 15:08:39.246114205 -0300
+@@ -84,6 +84,8 @@
+ #include "../../mach-mx28/includes/registers/regsrtc.h"
+ #elif defined(STMP378X)
+ #include "../../mach-mx23/includes/registers/regsrtc.h"
+#elif defined(IMX23_OLINUXINO)
+#include "../../mach-mx23/includes/registers/regsrtc.h"
+ #endif
+
+ #define NAND_SECONDARY_BOOT          0x00000002
+diff -Nura imx-bootlets-src-10.12.01/linux_prep/include/mx23/platform.h imx-bootlets-src-10.12.01-olinuxino/linux_prep/include/mx23/platform.h
+--- imx-bootlets-src-10.12.01/linux_prep/include/mx23/platform.h	2010-11-04 04:35:38.000000000 -0300
+++ imx-bootlets-src-10.12.01-olinuxino/linux_prep/include/mx23/platform.h	2013-05-17 15:09:21.006476997 -0300
+@@ -19,6 +19,8 @@
+
+ #if defined (BOARD_STMP378X_DEV)
+ #define	MACHINE_ID	0xa45
+#elif defined (BOARD_IMX23_OLINUXINO_DEV)
+#define MACHINE_ID	0x1009
+ #else
+ #error "Allocate a machine ID for your board"
+ #endif
+diff -Nura imx-bootlets-src-10.12.01/linux_prep/Makefile imx-bootlets-src-10.12.01-olinuxino/linux_prep/Makefile
+--- imx-bootlets-src-10.12.01/linux_prep/Makefile	2010-11-04 04:35:38.000000000 -0300
+++ imx-bootlets-src-10.12.01-olinuxino/linux_prep/Makefile	2013-05-17 15:09:53.554539143 -0300
+@@ -69,6 +69,11 @@
+ HW_OBJS = $(LRADC_OBJS)
+ CFLAGS += -DMX28 -DBOARD_MX28_EVK
+ endif
+ifeq ($(BOARD), imx23_olinuxino_dev)
+ARCH = mx23
+HW_OBJS = $(LRADC_OBJS)
+CFLAGS += -DIMX23_OLINUXINO -DBOARD_IMX23_OLINUXINO_DEV
+endif
+
+ # Generic code
+ CORE_OBJS = entry.o resume.o cmdlines.o setup.o keys.o
+diff -Nura imx-bootlets-src-10.12.01/Makefile imx-bootlets-src-10.12.01-olinuxino/Makefile
+--- imx-bootlets-src-10.12.01/Makefile	2010-11-04 04:35:38.000000000 -0300
+++ imx-bootlets-src-10.12.01-olinuxino/Makefile	2013-05-17 15:23:53.709956619 -0300
+@@ -16,6 +16,9 @@
+ ifeq ($(BOARD), iMX28_EVK)
+ ARCH = mx28
+ endif
+ifeq ($(BOARD), imx23_olinuxino_dev)
+ARCH = mx23
+endif
+
+ all: build_prep gen_bootstream
+
--- a/firmware/buildroot/board/olimex/imx233_olinuxino/readme.txt
+++ b/firmware/buildroot/board/olimex/imx233_olinuxino/readme.txt
@@ -0,0 +1,57 @@
+This configuration is intended as a base image.
+It includes kernel and firmware support for the common USB WiFi hardware.
+Packages for WiFi support are up to the user, you'll probably want
+one or more of: hostapd, iw, wireless_tools and/or wpa_supplicant.
+
+It also pulls up the console on the serial port, not on TV output.
+
+You'll need a spare MicroSD card with Freescale's special partition layout.
+This is basically two partitions:
+
+1) Type 53, the bootstrap + bootloader/kernel partition, should be 16MB.
+2) Anything you like, for this example an ext2 partition, type 83 (linux).
+
+Assuming you see your MicroSD card as /dev/sdc you'd need to do, as root
+and from the buildroot project top level directory:
+(remember to replace /dev/sdc* with the appropiate device name!)
+
+***** WARNING: Double check that /dev/sdc is your MicroSD card *****
+*****      It might be /dev/sdb or some other device name      *****
+***** Failure to do so may result in you wiping your hard disk *****
+
+1. Unmount the filesystem(s) if they're already mounted, usually...
+
+   # for fs in `grep /dev/sdc /proc/mounts|cut -d ' ' -f 1`;do umount $fs;done
+
+   ...should work
+
+2. Blank the partition table out
+
+   # dd if=/dev/zero of=/dev/sdc bs=1024 count=1024
+
+3. Set up the partitions
+
+   # fdisk /dev/sdc
+   n
+   p
+   1
+   <ENTER>
+   +16MB
+   t
+   53
+   n
+   p
+   2
+   <ENTER>
+   <ENTER>
+   w
+
+4. Fill up the first (bootstrap + kernel) partition
+   # dd if=output/images/imx23_olinuxino_dev_linux.sb bs=512 of=/dev/sdc1 seek=4
+
+5. Fill up the second (filesystem) partition
+   # dd if=output/images/rootfs.ext2 of=/dev/sdc2 bs=512
+
+6. Remove the MicroSD card from your linux PC and put it into your olinuxino.
+
+7. Boot! You're done!