Import buildroot 2016.02.01

firmware/buildroot/system/Config.in

@@ -0,0 +1,482 @@
+menu "System configuration"
+
+config BR2_TARGET_GENERIC_HOSTNAME
+	string "System hostname"
+	default "buildroot"
+	help
+	  Select system hostname to be stored in /etc/hostname.
+
+	  Leave empty to not create /etc/hostname, or to keep the
+	  one from a custom skeleton.
+
+config BR2_TARGET_GENERIC_ISSUE
+	string "System banner"
+	default "Welcome to Buildroot"
+	help
+	  Select system banner (/etc/issue) to be displayed at login.
+
+	  Leave empty to not create /etc/issue, or to keep the
+	  one from a custom skeleton.
+
+choice
+	bool "Passwords encoding"
+	default BR2_TARGET_GENERIC_PASSWD_MD5
+	help
+	  Choose the password encoding scheme to use when Buildroot
+	  needs to encode a password (eg. the root password, below).
+
+	  Note: this is used at build-time, and *not* at runtime.
+
+config BR2_TARGET_GENERIC_PASSWD_MD5
+	bool "md5"
+	help
+	  Use MD5 to encode passwords.
+
+	  The default. Wildly available, and pretty good.
+	  Although pretty strong, MD5 is now an old hash function, and
+	  suffers from some weaknesses, which makes it susceptible to
+	  brute-force attacks.
+
+config BR2_TARGET_GENERIC_PASSWD_SHA256
+	bool "sha-256"
+	help
+	  Use SHA256 to encode passwords.
+
+	  Very strong, but not ubiquitous, although available in glibc
+	  for some time now. Choose only if you are sure your C library
+	  understands SHA256 passwords.
+
+config BR2_TARGET_GENERIC_PASSWD_SHA512
+	bool "sha-512"
+	help
+	  Use SHA512 to encode passwords.
+
+	  Extremely strong, but not ubiquitous, although available in glibc
+	  for some time now. Choose only if you are sure your C library
+	  understands SHA512 passwords.
+
+endchoice # Passwd encoding
+
+config BR2_TARGET_GENERIC_PASSWD_METHOD
+	string
+	default "md5"       if BR2_TARGET_GENERIC_PASSWD_MD5
+	default "sha-256"   if BR2_TARGET_GENERIC_PASSWD_SHA256
+	default "sha-512"   if BR2_TARGET_GENERIC_PASSWD_SHA512
+
+choice
+	prompt "Init system"
+	default BR2_INIT_BUSYBOX
+
+config BR2_INIT_BUSYBOX
+	bool "BusyBox"
+	select BR2_PACKAGE_BUSYBOX
+	select BR2_PACKAGE_INITSCRIPTS
+
+config BR2_INIT_SYSV
+	bool "systemV"
+	select BR2_PACKAGE_BUSYBOX_SHOW_OTHERS # sysvinit
+	select BR2_PACKAGE_INITSCRIPTS
+	select BR2_PACKAGE_SYSVINIT
+
+# In Buildroot, we decided not to support a split-usr when systemd is
+# used as an init system. This is a design decision, not a systemd
+# issue. Thus the select is with BR2_INIT_SYSTEMD (below) rather than
+# with BR2_PACKAGE_SYSTEMD.
+config BR2_INIT_SYSTEMD
+	bool "systemd"
+	depends on BR2_PACKAGE_SYSTEMD_ARCH_SUPPORTS
+	depends on BR2_TOOLCHAIN_USES_GLIBC
+	depends on BR2_USE_WCHAR
+	depends on BR2_TOOLCHAIN_HAS_THREADS
+	depends on BR2_TOOLCHAIN_HAS_SSP
+	depends on BR2_USE_MMU
+	depends on !BR2_STATIC_LIBS
+	depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10
+	select BR2_ROOTFS_MERGED_USR
+	select BR2_PACKAGE_SYSTEMD
+
+comment "systemd needs (e)glibc toolchain, headers >= 3.10"
+	depends on !(BR2_TOOLCHAIN_USES_GLIBC \
+		&& BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10)
+
+config BR2_INIT_NONE
+	bool "None"
+
+endchoice
+
+choice
+	prompt "/dev management" if !BR2_INIT_SYSTEMD
+	default BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS
+
+config BR2_ROOTFS_DEVICE_CREATION_STATIC
+	bool "Static using device table"
+
+config BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS
+	bool "Dynamic using devtmpfs only"
+
+config BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV
+	bool "Dynamic using devtmpfs + mdev"
+	select BR2_PACKAGE_BUSYBOX
+
+config BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV
+	bool "Dynamic using devtmpfs + eudev"
+	depends on BR2_USE_WCHAR
+	depends on !BR2_STATIC_LIBS
+	depends on BR2_USE_MMU # eudev
+	select BR2_PACKAGE_EUDEV
+
+comment "eudev needs a toolchain w/ wchar, dynamic library"
+	depends on BR2_USE_MMU
+	depends on !BR2_USE_WCHAR || BR2_STATIC_LIBS
+
+endchoice
+
+comment "/dev management using udev (from systemd)"
+	depends on BR2_INIT_SYSTEMD
+
+config BR2_ROOTFS_DEVICE_TABLE
+	string "Path to the permission tables"
+	default "system/device_table.txt"
+	help
+	  Specify a space-separated list of permission table locations,
+	  that will be passed to the makedevs utility to assign
+	  correct owners and permissions on various files in the
+	  target filesystem.
+
+	  See package/makedevs/README for details on the usage and
+	  syntax of these files.
+
+config BR2_ROOTFS_STATIC_DEVICE_TABLE
+	string "Path to the device tables"
+	default "system/device_table_dev.txt"
+	depends on BR2_ROOTFS_DEVICE_CREATION_STATIC
+	help
+	  Specify a space-separated list of device table locations,
+	  that will be passed to the makedevs utility to create all
+	  the special device files under /dev.
+
+	  See package/makedevs/README for details on the usage and
+	  syntax of these files.
+
+choice
+	prompt "Root FS skeleton"
+
+config BR2_ROOTFS_SKELETON_DEFAULT
+	bool "default target skeleton"
+	help
+	  Use default target skeleton
+
+config BR2_ROOTFS_SKELETON_CUSTOM
+	bool "custom target skeleton"
+	help
+	  Use custom target skeleton.
+
+endchoice
+
+if BR2_ROOTFS_SKELETON_CUSTOM
+config BR2_ROOTFS_SKELETON_CUSTOM_PATH
+	string "custom target skeleton path"
+	default "system/skeleton"
+	help
+	  Path to custom target skeleton.
+
+# dummy config so merged /usr workarounds can also be activated for
+# custom rootfs skeleton
+config BR2_ROOTFS_MERGED_USR
+
+endif
+
+if BR2_ROOTFS_SKELETON_DEFAULT
+
+config BR2_ROOTFS_MERGED_USR
+	bool "Use symlinks to /usr for /bin, /sbin and /lib"
+	help
+	  If you say 'n' here, then /bin, /sbin and /lib and their
+	  counterparts in /usr will be separate directories. This
+	  is the historical UNIX way. In this case, /usr can be a
+	  filesystem on a partition separate from / .
+
+	  If you say 'y' here, then /bin, /sbin and /lib will be symlinks
+	  to their counterparts in /usr. In this case, /usr can not be a
+	  separate filesystem.
+
+config BR2_TARGET_ENABLE_ROOT_LOGIN
+	bool "Enable root login with password"
+	default y
+	help
+	  Allow root to log in with a password.
+
+	  If not enabled, root will not be able to log in with a password.
+	  However, if you have an ssh server and you add an ssh key, you
+	  can still allow root to log in. Alternatively, you can use sudo
+	  to become root.
+
+config BR2_TARGET_GENERIC_ROOT_PASSWD
+	string "Root password"
+	default ""
+	depends on BR2_TARGET_ENABLE_ROOT_LOGIN
+	help
+	  Set the initial root password.
+
+	  If set to empty (the default), then no root password will be set,
+	  and root will need no password to log in.
+
+	  If the password starts with any of $1$, $5$ or $6$, it is considered
+	  to be already crypt-encoded with respectively md5, sha256 or sha512.
+	  Any other value is taken to be a clear-text value, and is crypt-encoded
+	  as per the "Passwords encoding" scheme, above.
+
+	  Note: "$" signs in the hashed password must be doubled. For example,
+	  if the hashed password is "$1$longsalt$v35DIIeMo4yUfI23yditq0",
+	  then you must enter it as "$$1$$longsalt$$v35DIIeMo4yUfI23yditq0"
+	  (this is necessary otherwise make would attempt to interpret the $
+	  as a variable expansion).
+
+	  WARNING! WARNING!
+	  The password appears as-is in the .config file, and may appear
+	  in the build log! Avoid using a valuable password if either the
+	  .config file or the build log may be distributed, or at the
+	  very least use a strong cryptographic hash for your password!
+
+choice
+	bool "/bin/sh"
+	default BR2_SYSTEM_BIN_SH_DASH if !BR2_PACKAGE_BUSYBOX
+	help
+	  Select which shell will provide /bin/sh.
+
+# busybox has shells that work on noMMU
+config BR2_SYSTEM_BIN_SH_BUSYBOX
+	bool "busybox' default shell"
+	depends on BR2_PACKAGE_BUSYBOX
+
+config BR2_SYSTEM_BIN_SH_BASH
+	bool "bash"
+	depends on BR2_USE_MMU # bash
+	depends on BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
+	select BR2_PACKAGE_BASH
+
+config BR2_SYSTEM_BIN_SH_DASH
+	bool "dash"
+	depends on BR2_USE_MMU # dash
+	depends on BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
+	select BR2_PACKAGE_DASH
+
+config BR2_SYSTEM_BIN_SH_ZSH
+	bool "zsh"
+	depends on BR2_USE_MMU # zsh
+	depends on BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
+	select BR2_PACKAGE_ZSH
+
+comment "bash, dash, zsh need BR2_PACKAGE_BUSYBOX_SHOW_OTHERS"
+	depends on !BR2_PACKAGE_BUSYBOX_SHOW_OTHERS && BR2_PACKAGE_BUSYBOX
+
+config BR2_SYSTEM_BIN_SH_NONE
+	bool "none"
+
+endchoice # /bin/sh
+
+config BR2_SYSTEM_BIN_SH
+	string
+	default "busybox" if BR2_SYSTEM_BIN_SH_BUSYBOX
+	default "bash"    if BR2_SYSTEM_BIN_SH_BASH
+	default "dash"    if BR2_SYSTEM_BIN_SH_DASH
+	default "zsh"     if BR2_SYSTEM_BIN_SH_ZSH
+
+menuconfig BR2_TARGET_GENERIC_GETTY
+	bool "Run a getty (login prompt) after boot"
+	default y
+
+if BR2_TARGET_GENERIC_GETTY
+config BR2_TARGET_GENERIC_GETTY_PORT
+	string "TTY port"
+	default "console"
+	help
+	  Specify a port to run a getty on.
+
+choice
+	prompt "Baudrate"
+	default BR2_TARGET_GENERIC_GETTY_BAUDRATE_KEEP
+	help
+	  Select a baudrate to use.
+
+config BR2_TARGET_GENERIC_GETTY_BAUDRATE_KEEP
+	bool "keep kernel default"
+config BR2_TARGET_GENERIC_GETTY_BAUDRATE_9600
+	bool "9600"
+config BR2_TARGET_GENERIC_GETTY_BAUDRATE_19200
+	bool "19200"
+config BR2_TARGET_GENERIC_GETTY_BAUDRATE_38400
+	bool "38400"
+config BR2_TARGET_GENERIC_GETTY_BAUDRATE_57600
+	bool "57600"
+config BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200
+	bool "115200"
+endchoice
+
+config BR2_TARGET_GENERIC_GETTY_BAUDRATE
+	string
+	default "0"		if BR2_TARGET_GENERIC_GETTY_BAUDRATE_KEEP
+	default "9600"		if BR2_TARGET_GENERIC_GETTY_BAUDRATE_9600
+	default "19200"		if BR2_TARGET_GENERIC_GETTY_BAUDRATE_19200
+	default "38400"		if BR2_TARGET_GENERIC_GETTY_BAUDRATE_38400
+	default "57600"		if BR2_TARGET_GENERIC_GETTY_BAUDRATE_57600
+	default "115200"	if BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200
+
+config BR2_TARGET_GENERIC_GETTY_TERM
+	string "TERM environment variable"
+	default "vt100"
+	help
+	  Specify a TERM type.
+
+config BR2_TARGET_GENERIC_GETTY_OPTIONS
+	string "other options to pass to getty"
+	default ""
+	help
+	  Any other flags you want to pass to getty,
+	  Refer to getty --help for details.
+endif
+
+config BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW
+	bool "remount root filesystem read-write during boot"
+	default y
+	help
+	  The root filesystem is typically mounted read-only at boot.
+	  By default, buildroot remounts it in read-write mode early during the
+	  boot process.
+	  Say no here if you would rather like your root filesystem to remain
+	  read-only.
+	  If unsure, say Y.
+
+endif # BR2_ROOTFS_SKELETON_DEFAULT
+
+
+config BR2_SYSTEM_DHCP
+	string "Network interface to configure through DHCP"
+	default ""
+	depends on !BR2_PACKAGE_SYSTEMD_NETWORKD && (BR2_PACKAGE_BUSYBOX || BR2_PACKAGE_IFUPDOWN)
+	help
+	  Enter here the name of the network interface (E.G. eth0) to
+	  automatically configure through DHCP at bootup.
+
+	  If left empty, no automatic DHCP requests will take place.
+
+	  For more complicated network setups use an overlay to overwrite
+	  /etc/network/interfaces or add a networkd configuration file.
+
+comment "automatic network configuration via DHCP is not compatible with networkd"
+	depends on BR2_PACKAGE_SYSTEMD_NETWORKD
+
+comment "automatic network configuration via DHCP needs ifupdown or busybox"
+	depends on !(BR2_PACKAGE_BUSYBOX || BR2_PACKAGE_IFUPDOWN)
+
+config BR2_TARGET_TZ_INFO
+	bool "Install timezone info"
+	# No timezone for musl; only for uClibc or (e)glibc.
+	depends on BR2_TOOLCHAIN_USES_GLIBC || BR2_TOOLCHAIN_USES_UCLIBC
+	select BR2_PACKAGE_TZDATA if BR2_TOOLCHAIN_USES_GLIBC
+	select BR2_PACKAGE_TZ if BR2_TOOLCHAIN_USES_UCLIBC
+	help
+	  Say 'y' here to install timezone info.
+
+if BR2_TARGET_TZ_INFO
+
+config BR2_TARGET_TZ_ZONELIST
+	string "timezone list"
+	default "default"
+	help
+	  Space-separated list of time zones to compile.
+
+	  The value "default" includes all commonly used time zones. Note
+	  that this set consumes around 5.5M for (e)glibc and 2.1M for uClibc.
+
+	  The full list is the list of files in the time zone database source,
+	  not including the build and .tab files.
+
+config BR2_TARGET_LOCALTIME
+	string "default local time"
+	default "Etc/UTC"
+	help
+	  The time zone to install as the default local time, expressed as a
+	  tzdata location, such as:
+	    GMT
+	    Europe/Paris
+	    America/New_York
+	    Pacific/Wallis
+	    ...
+
+	  If empty, no local time will be set, and the dates will be
+	  expressed in UTC.
+
+endif # BR2_TARGET_TZ_INFO
+
+config BR2_ROOTFS_USERS_TABLES
+	string "Path to the users tables"
+	help
+	  Specify a space-separated list of users table locations,
+	  that will be passed to the mkusers utility to create
+	  users on the system, with home directory, password, etc.
+
+	  See manual for details on the usage and syntax of these files.
+
+config BR2_ROOTFS_OVERLAY
+	string "Root filesystem overlay directories"
+	default ""
+	help
+	  Specify a list of directories that are copied over the target
+	  root filesystem after the build has finished and before it is
+	  packed into the selected filesystem images.
+
+	  They are copied as-is into the rootfs, excluding files ending with
+	  ~ and .git, .svn and .hg directories.
+
+config BR2_ROOTFS_POST_BUILD_SCRIPT
+	string "Custom scripts to run before creating filesystem images"
+	default ""
+	help
+	  Specify a space-separated list of scripts to be run after the build
+	  has finished and before Buildroot starts packing the files into
+	  selected filesystem images.
+
+	  This gives users the opportunity to do board-specific cleanups,
+	  add-ons and the like, so the generated files can be used directly
+	  without further processing.
+
+	  These scripts are called with the target directory name as first
+	  argument. Make sure the exit code of those scripts are 0, otherwise
+	  make will stop after calling them.
+
+config BR2_ROOTFS_POST_IMAGE_SCRIPT
+	string "Custom scripts to run after creating filesystem images"
+	default ""
+	help
+	  Specify a space-separated list of scripts to be run after
+	  the build has finished and after Buildroot has packed the
+	  files into selected filesystem images.
+
+	  This can for example be used to call a tool building a
+	  firmware image from different images generated by Buildroot,
+	  or automatically extract the tarball root filesystem image
+	  into some location exported by NFS, or any other custom
+	  action.
+
+	  These scripts are called with the images directory name as
+	  first argument. The script is executed from the main Buildroot
+	  source directory as the current directory.
+
+config BR2_ROOTFS_POST_SCRIPT_ARGS
+	string "Extra post-{build,image} arguments"
+	depends on BR2_ROOTFS_POST_BUILD_SCRIPT != "" || BR2_ROOTFS_POST_IMAGE_SCRIPT != ""
+	help
+	  Pass these additional arguments to each post-build or post-image
+	  scripts.
+
+	  Note that all the post-build and post-image scripts will be passed
+	  the same set of arguments, you can not pass different arguments to
+	  each script.
+
+	  Note also, as stated in their respective help text, that the first
+	  argument to each post-build or post-image script is the target
+	  directory / images directory. The arguments in this option will be
+	  passed *after* those.
+
+endmenu

firmware/buildroot/system/device_table.txt

@@ -0,0 +1,21 @@
+# See package/makedevs/README for details
+#
+# This device table is used to assign proper ownership and permissions
+# on various files. It doesn't create any device file, as it is used
+# in both static device configurations (where /dev/ is static) and in
+# dynamic configurations (where devtmpfs, mdev or udev are used).
+#
+# <name>				<type>	<mode>	<uid>	<gid>	<major>	<minor>	<start>	<inc>	<count>
+/dev					d	755	0	0	-	-	-	-	-
+/tmp					d	1777	0	0	-	-	-	-	-
+/etc					d	755	0	0	-	-	-	-	-
+/root					d	700	0	0	-	-	-	-	-
+/var/www				d	755	33	33	-	-	-	-	-
+/etc/shadow				f	600	0	0	-	-	-	-	-
+/etc/passwd				f	644	0	0	-	-	-	-	-
+/etc/network/if-up.d			d	755	0	0	-	-	-	-	-
+/etc/network/if-pre-up.d		d	755	0	0	-	-	-	-	-
+/etc/network/if-down.d			d	755	0	0	-	-	-	-	-
+/etc/network/if-post-down.d		d	755	0	0	-	-	-	-	-
+# uncomment this to allow starting x as non-root
+#/usr/X11R6/bin/Xfbdev		     	f	4755	0	0	-	-	-	-	-

firmware/buildroot/system/device_table_dev.txt

@@ -0,0 +1,132 @@
+# See package/makedevs/README for details
+#
+# This device table is used only to create device files when a static
+# device configuration is used (entries in /dev are static).
+#
+# <name>	<type>	<mode>	<uid>	<gid>	<major>	<minor>	<start>	<inc>	<count>
+
+# Normal system devices
+/dev/mem	c	640	0	0	1	1	0	0	-
+/dev/kmem	c	640	0	0	1	2	0	0	-
+/dev/null	c	666	0	0	1	3	0	0	-
+/dev/zero	c	666	0	0	1	5	0	0	-
+/dev/random	c	666	0	0	1	8	0	0	-
+/dev/urandom	c	666	0	0	1	9	0	0	-
+/dev/ram	b	640	0	0	1	1	0	0	-
+/dev/ram	b	640	0	0	1	0	0	1	4
+/dev/loop	b	640	0	0	7	0	0	1	2
+/dev/rtc	c	640	0	0	10	135	-	-	-
+/dev/console	c	666	0	0	5	1	-	-	-
+/dev/tty	c	666	0	0	5	0	-	-	-
+/dev/tty	c	666	0	0	4	0	0	1	8
+/dev/ttyp	c	666	0	0	3	0	0	1	10
+/dev/ptyp	c       666     0       0       2       0       0       1       10
+/dev/ptmx	c	666	0	0	5	2	-	-	-
+/dev/ttyP	c	666	0	0	57	0	0	1	4
+/dev/ttyS	c	666	0	0	4	64	0	1	4
+/dev/fb		c	640	0	5	29	0	0	1	4
+#/dev/ttySA	c	666	0	0	204	5	0	1	3
+/dev/psaux	c	666	0	0	10	1	0	0	-
+#/dev/ppp	c	666	0	0	108	0	-	-	-
+/dev/ttyAM	c	666	0	0	204	16	0	1	3
+/dev/ttyCPM	c	666	0	0	204	46	0	1	4
+/dev/ttyAMA	c	666	0	0	204	64	0	1	4
+/dev/ttySAC	c	666	0	0	204	64	0	1	4
+/dev/ttySC	c	666	0	0	204	8	0	1	8
+/dev/ttyPSC	c	666	0	0	204	148	0	1	4
+/dev/ttyUL	c	666	0	0	204	187	0	1	4
+/dev/ttymxc	c	666	0	0	207	16	0	1	4
+/dev/hvc	c	640	0	0	229	0	0	1	4
+
+# Input stuff
+/dev/input		d	755	0	0	-	-	-	-	-
+/dev/input/mice		c	640	0	0	13	63	0	0	-
+/dev/input/mouse	c	660	0	0	13	32	0	1	4
+/dev/input/event	c	660	0	0	13	64	0	1	4
+#/dev/input/js		c	660	0	0	13	0	0	1	4
+
+
+# MTD stuff
+/dev/mtd	c	640	0	0	90	0	0	2	4
+/dev/mtdblock	b	640	0	0	31	0	0	1	4
+
+#Tun/tap driver
+/dev/net	d	755	0	0	-	-	-	-	-
+/dev/net/tun	c	660	0	0	10	200	-	-	-
+
+# Audio stuff
+#/dev/audio	c	666	0	29	14	4	-	-	-
+#/dev/audio1	c	666	0	29	14	20	-	-	-
+#/dev/dsp	c	666	0	29	14	3	-	-	-
+#/dev/dsp1	c	666	0	29	14	19	-	-	-
+#/dev/sndstat	c	666	0	29	14	6	-	-	-
+
+# User-mode Linux stuff
+#/dev/ubda	b	640	0	0	98	0	0	0	-
+#/dev/ubda	b	640	0	0	98	1	1	1	15
+
+# IDE Devices
+/dev/hda	b	640	0	0	3	0	0	0	-
+/dev/hda	b	640	0	0	3	1	1	1	15
+/dev/hdb	b	640	0	0	3	64	0	0	-
+/dev/hdb	b	640	0	0	3	65	1	1	15
+#/dev/hdc	b	640	0	0	22	0	0	0	-
+#/dev/hdc	b	640	0	0	22	1	1	1	15
+#/dev/hdd	b	640	0	0	22	64	0	0	-
+#/dev/hdd	b	640	0	0	22	65	1	1	15
+#/dev/hde	b	640	0	0	33	0	0	0	-
+#/dev/hde	b	640	0	0	33	1	1	1	15
+#/dev/hdf	b	640	0	0	33	64	0	0	-
+#/dev/hdf	b	640	0	0	33	65	1	1	15
+#/dev/hdg	b	640	0	0	34	0	0	0	-
+#/dev/hdg	b	640	0	0	34	1	1	1	15
+#/dev/hdh	b	640	0	0	34	64	0	0	-
+#/dev/hdh	b	640	0	0	34	65	1	1	15
+
+# SCSI Devices
+/dev/sda	b	640	0	0	8	0	0	0	-
+/dev/sda	b	640	0	0	8	1	1	1	15
+/dev/sdb	b	640	0	0	8	16	0	0	-
+/dev/sdb	b	640	0	0	8	17	1	1	15
+#/dev/sdc	b	640	0	0	8	32	0	0	-
+#/dev/sdc	b	640	0	0	8	33	1	1	15
+#/dev/sdd	b	640	0	0	8	48	0	0	-
+#/dev/sdd	b	640	0	0	8	49	1	1	15
+#/dev/sde	b	640	0	0	8	64	0	0	-
+#/dev/sde	b	640	0	0	8	65	1	1	15
+#/dev/sdf	b	640	0	0	8	80	0	0	-
+#/dev/sdf	b	640	0	0	8	81	1	1	15
+#/dev/sdg	b	640	0	0	8	96	0	0	-
+#/dev/sdg	b	640	0	0	8	97	1	1	15
+#/dev/sdh	b	640	0	0	8	112	0	0	-
+#/dev/sdh	b	640	0	0	8	113	1	1	15
+#/dev/sg	c	640	0	0	21	0	0	1	15
+#/dev/scd	b	640	0	0	11	0	0	1	15
+#/dev/st	c	640	0	0	9	0	0	1	8
+#/dev/nst	c	640	0	0	9	128	0	1	8
+#/dev/st	c	640	0	0	9	32	1	1	4
+#/dev/st	c	640	0	0	9	64	1	1	4
+#/dev/st	c	640	0	0	9	96	1	1	4
+
+# USB block devices (ub driver)
+/dev/uba	b	640	0	0	180	0	0	0	-
+/dev/uba	b	640	0	0	180	1	1	1	6
+/dev/ubb	b	640	0	0	180	8	0	0	-
+/dev/ubb	b	640	0	0	180	65	1	1	6
+
+# Floppy disk devices
+#/dev/fd	b	640	0	0	2	0	0	1	2
+#/dev/fd0d360	b	640	0	0	2	4	0	0	-
+#/dev/fd1d360	b	640	0	0	2	5	0	0	-
+#/dev/fd0h1200	b	640	0	0	2	8	0	0	-
+#/dev/fd1h1200	b	640	0	0	2	9	0	0	-
+#/dev/fd0u1440	b	640	0	0	2	28	0	0	-
+#/dev/fd1u1440	b	640	0	0	2	29	0	0	-
+#/dev/fd0u2880	b	640	0	0	2	32	0	0	-
+#/dev/fd1u2880	b	640	0	0	2	33	0	0	-
+
+# I2C device nodes
+/dev/i2c-	c	666	0	0	89	0	0	1	4
+
+# v4l device nodes
+/dev/video	c	666	0	0	81	0	0	1	4

firmware/buildroot/system/skeleton/dev/log

@@ -0,0 +1 @@
+../tmp/log

firmware/buildroot/system/skeleton/etc/fstab

@@ -0,0 +1,8 @@
+# <file system>	<mount pt>	<type>	<options>	<dump>	<pass>
+/dev/root	/		ext2	rw,noauto	0	1
+proc		/proc		proc	defaults	0	0
+devpts		/dev/pts	devpts	defaults,gid=5,mode=620	0	0
+tmpfs		/dev/shm	tmpfs	mode=0777	0	0
+tmpfs		/tmp		tmpfs	mode=1777	0	0
+tmpfs		/run		tmpfs	mode=0755,nosuid,nodev	0	0
+sysfs		/sys		sysfs	defaults	0	0

firmware/buildroot/system/skeleton/etc/group

@@ -0,0 +1,26 @@
+root:x:0:
+daemon:x:1:
+bin:x:2:
+sys:x:3:
+adm:x:4:
+tty:x:5:
+disk:x:6:
+lp:x:7:
+mail:x:8:
+kmem:x:9:
+wheel:x:10:root
+cdrom:x:11:
+dialout:x:18:
+floppy:x:19:
+video:x:28:
+audio:x:29:
+tape:x:32:
+www-data:x:33:
+operator:x:37:
+utmp:x:43:
+plugdev:x:46:
+staff:x:50:
+lock:x:54:
+netdev:x:82:
+nogroup:x:99:
+users:x:100:

firmware/buildroot/system/skeleton/etc/hosts

@@ -0,0 +1 @@
+127.0.0.1	localhost

firmware/buildroot/system/skeleton/etc/mtab

@@ -0,0 +1 @@
+/proc/mounts

firmware/buildroot/system/skeleton/etc/network/if-pre-up.d/wait_iface

@@ -0,0 +1,21 @@
+#!/bin/sh
+
+# In case we have a slow-to-appear interface (e.g. eth-over-USB),
+# and we need to configure it, wait until it appears, but not too
+# long either. IF_WAIT_DELAY is in seconds.
+
+if [ "${IF_WAIT_DELAY}" -a ! -e "/sys/class/net/${IFACE}" ]; then
+    printf "Waiting for interface %s to appear" "${IFACE}"
+    while [ ${IF_WAIT_DELAY} -gt 0 ]; do
+        if [ -e "/sys/class/net/${IFACE}" ]; then
+            printf "\n"
+            exit 0
+        fi
+        sleep 1
+        printf "."
+        : $((IF_WAIT_DELAY -= 1))
+    done
+    printf " timeout!\n"
+    exit 1
+fi
+

firmware/buildroot/system/skeleton/etc/passwd

@@ -0,0 +1,9 @@
+root:x:0:0:root:/root:/bin/sh
+daemon:x:1:1:daemon:/usr/sbin:/bin/false
+bin:x:2:2:bin:/bin:/bin/false
+sys:x:3:3:sys:/dev:/bin/false
+sync:x:4:100:sync:/bin:/bin/sync
+mail:x:8:8:mail:/var/spool/mail:/bin/false
+www-data:x:33:33:www-data:/var/www:/bin/false
+operator:x:37:37:Operator:/var:/bin/false
+nobody:x:99:99:nobody:/home:/bin/false

firmware/buildroot/system/skeleton/etc/profile

@@ -0,0 +1,20 @@
+export PATH=/bin:/sbin:/usr/bin:/usr/sbin
+
+if [ "$PS1" ]; then
+	if [ "`id -u`" -eq 0 ]; then
+		export PS1='# '
+	else
+		export PS1='$ '
+	fi
+fi
+
+export PAGER='/bin/more '
+export EDITOR='/bin/vi'
+
+# Source configuration files from /etc/profile.d
+for i in /etc/profile.d/*.sh ; do
+	if [ -r "$i" ]; then
+		. $i
+	fi
+	unset i
+done

firmware/buildroot/system/skeleton/etc/profile.d/umask.sh

@@ -0,0 +1 @@
+umask 022

firmware/buildroot/system/skeleton/etc/protocols

@@ -0,0 +1,61 @@
+# Internet (IP) protocols
+#
+# Updated from http://www.iana.org/assignments/protocol-numbers and other
+# sources.
+
+ip	0	IP		# internet protocol, pseudo protocol number
+hopopt	0	HOPOPT		# IPv6 Hop-by-Hop Option [RFC1883]
+icmp	1	ICMP		# internet control message protocol
+igmp	2	IGMP		# Internet Group Management
+ggp	3	GGP		# gateway-gateway protocol
+ipencap	4	IP-ENCAP	# IP encapsulated in IP (officially ``IP'')
+st	5	ST		# ST datagram mode
+tcp	6	TCP		# transmission control protocol
+egp	8	EGP		# exterior gateway protocol
+igp	9	IGP		# any private interior gateway (Cisco)
+pup	12	PUP		# PARC universal packet protocol
+udp	17	UDP		# user datagram protocol
+hmp	20	HMP		# host monitoring protocol
+xns-idp	22	XNS-IDP		# Xerox NS IDP
+rdp	27	RDP		# "reliable datagram" protocol
+iso-tp4	29	ISO-TP4		# ISO Transport Protocol class 4 [RFC905]
+dccp	33	DCCP		# Datagram Congestion Control Prot. [RFC4340]
+xtp	36	XTP		# Xpress Transfer Protocol
+ddp	37	DDP		# Datagram Delivery Protocol
+idpr-cmtp 38	IDPR-CMTP	# IDPR Control Message Transport
+ipv6	41	IPv6		# Internet Protocol, version 6
+ipv6-route 43	IPv6-Route	# Routing Header for IPv6
+ipv6-frag 44	IPv6-Frag	# Fragment Header for IPv6
+idrp	45	IDRP		# Inter-Domain Routing Protocol
+rsvp	46	RSVP		# Reservation Protocol
+gre	47	GRE		# General Routing Encapsulation
+esp	50	IPSEC-ESP	# Encap Security Payload [RFC2406]
+ah	51	IPSEC-AH	# Authentication Header [RFC2402]
+skip	57	SKIP		# SKIP
+ipv6-icmp 58	IPv6-ICMP	# ICMP for IPv6
+ipv6-nonxt 59	IPv6-NoNxt	# No Next Header for IPv6
+ipv6-opts 60	IPv6-Opts	# Destination Options for IPv6
+rspf	73	RSPF CPHB	# Radio Shortest Path First (officially CPHB)
+vmtp	81	VMTP		# Versatile Message Transport
+eigrp	88	EIGRP		# Enhanced Interior Routing Protocol (Cisco)
+ospf	89	OSPFIGP		# Open Shortest Path First IGP
+ax.25	93	AX.25		# AX.25 frames
+ipip	94	IPIP		# IP-within-IP Encapsulation Protocol
+etherip	97	ETHERIP		# Ethernet-within-IP Encapsulation [RFC3378]
+encap	98	ENCAP		# Yet Another IP encapsulation [RFC1241]
+#	99			# any private encryption scheme
+pim	103	PIM		# Protocol Independent Multicast
+ipcomp	108	IPCOMP		# IP Payload Compression Protocol
+vrrp	112	VRRP		# Virtual Router Redundancy Protocol [RFC5798]
+l2tp	115	L2TP		# Layer Two Tunneling Protocol [RFC2661]
+isis	124	ISIS		# IS-IS over IPv4
+sctp	132	SCTP		# Stream Control Transmission Protocol
+fc	133	FC		# Fibre Channel
+mobility-header 135 Mobility-Header # Mobility Support for IPv6 [RFC3775]
+udplite	136	UDPLite		# UDP-Lite [RFC3828]
+mpls-in-ip 137	MPLS-in-IP	# MPLS-in-IP [RFC4023]
+manet	138			# MANET Protocols [RFC5498]
+hip	139	HIP		# Host Identity Protocol
+shim6	140	Shim6		# Shim6 Protocol [RFC5533]
+wesp	141	WESP		# Wrapped Encapsulating Security Payload
+rohc	142	ROHC		# Robust Header Compression

firmware/buildroot/system/skeleton/etc/resolv.conf

@@ -0,0 +1 @@
+../tmp/resolv.conf

firmware/buildroot/system/skeleton/etc/services

@@ -0,0 +1,302 @@
+# /etc/services:
+# $Id: services,v 1.1 2004/10/09 02:49:18 andersen Exp $
+#
+# Network services, Internet style
+#
+# Note that it is presently the policy of IANA to assign a single well-known
+# port number for both TCP and UDP; hence, most entries here have two entries
+# even if the protocol doesn't support UDP operations.
+# Updated from RFC 1700, ``Assigned Numbers'' (October 1994).  Not all ports
+# are included, only the more common ones.
+
+tcpmux		1/tcp				# TCP port service multiplexer
+echo		7/tcp
+echo		7/udp
+discard		9/tcp		sink null
+discard		9/udp		sink null
+systat		11/tcp		users
+daytime		13/tcp
+daytime		13/udp
+netstat		15/tcp
+qotd		17/tcp		quote
+msp		18/tcp				# message send protocol
+msp		18/udp				# message send protocol
+chargen		19/tcp		ttytst source
+chargen		19/udp		ttytst source
+ftp-data	20/tcp
+ftp		21/tcp
+fsp		21/udp		fspd
+ssh		22/tcp				# SSH Remote Login Protocol
+ssh		22/udp				# SSH Remote Login Protocol
+telnet		23/tcp
+# 24 - private
+smtp		25/tcp		mail
+# 26 - unassigned
+time		37/tcp		timserver
+time		37/udp		timserver
+rlp		39/udp		resource	# resource location
+nameserver	42/tcp		name		# IEN 116
+whois		43/tcp		nicname
+re-mail-ck	50/tcp				# Remote Mail Checking Protocol
+re-mail-ck	50/udp				# Remote Mail Checking Protocol
+domain		53/tcp		nameserver	# name-domain server
+domain		53/udp		nameserver
+mtp		57/tcp				# deprecated
+bootps		67/tcp				# BOOTP server
+bootps		67/udp
+bootpc		68/tcp				# BOOTP client
+bootpc		68/udp
+tftp		69/udp
+gopher		70/tcp				# Internet Gopher
+gopher		70/udp
+rje		77/tcp		netrjs
+finger		79/tcp
+www		80/tcp		http		# WorldWideWeb HTTP
+www		80/udp				# HyperText Transfer Protocol
+link		87/tcp		ttylink
+kerberos	88/tcp		kerberos5 krb5	# Kerberos v5
+kerberos	88/udp		kerberos5 krb5	# Kerberos v5
+supdup		95/tcp
+# 100 - reserved
+hostnames	101/tcp		hostname	# usually from sri-nic
+iso-tsap	102/tcp		tsap		# part of ISODE.
+csnet-ns	105/tcp		cso-ns		# also used by CSO name server
+csnet-ns	105/udp		cso-ns
+# unfortunately the poppassd (Eudora) uses a port which has already
+# been assigned to a different service. We list the poppassd as an
+# alias here. This should work for programs asking for this service.
+# (due to a bug in inetd the 3com-tsmux line is disabled)
+#3com-tsmux	106/tcp		poppassd
+#3com-tsmux	106/udp		poppassd
+rtelnet		107/tcp				# Remote Telnet
+rtelnet		107/udp
+pop-2		109/tcp		postoffice	# POP version 2
+pop-2		109/udp
+pop-3		110/tcp				# POP version 3
+pop-3		110/udp
+sunrpc		111/tcp		portmapper	# RPC 4.0 portmapper TCP
+sunrpc		111/udp		portmapper	# RPC 4.0 portmapper UDP
+auth		113/tcp		authentication tap ident
+sftp		115/tcp
+uucp-path	117/tcp
+nntp		119/tcp		readnews untp	# USENET News Transfer Protocol
+ntp		123/tcp
+ntp		123/udp				# Network Time Protocol
+netbios-ns	137/tcp				# NETBIOS Name Service
+netbios-ns	137/udp
+netbios-dgm	138/tcp				# NETBIOS Datagram Service
+netbios-dgm	138/udp
+netbios-ssn	139/tcp				# NETBIOS session service
+netbios-ssn	139/udp
+imap2		143/tcp				# Interim Mail Access Proto v2
+imap2		143/udp
+snmp		161/udp				# Simple Net Mgmt Proto
+snmp-trap	162/udp		snmptrap	# Traps for SNMP
+cmip-man	163/tcp				# ISO mgmt over IP (CMOT)
+cmip-man	163/udp
+cmip-agent	164/tcp
+cmip-agent	164/udp
+xdmcp		177/tcp				# X Display Mgr. Control Proto
+xdmcp		177/udp
+nextstep	178/tcp		NeXTStep NextStep	# NeXTStep window
+nextstep	178/udp		NeXTStep NextStep	# server
+bgp		179/tcp				# Border Gateway Proto.
+bgp		179/udp
+prospero	191/tcp				# Cliff Neuman's Prospero
+prospero	191/udp
+irc		194/tcp				# Internet Relay Chat
+irc		194/udp
+smux		199/tcp				# SNMP Unix Multiplexer
+smux		199/udp
+at-rtmp		201/tcp				# AppleTalk routing
+at-rtmp		201/udp
+at-nbp		202/tcp				# AppleTalk name binding
+at-nbp		202/udp
+at-echo		204/tcp				# AppleTalk echo
+at-echo		204/udp
+at-zis		206/tcp				# AppleTalk zone information
+at-zis		206/udp
+qmtp		209/tcp				# The Quick Mail Transfer Protocol
+qmtp		209/udp				# The Quick Mail Transfer Protocol
+z3950		210/tcp		wais		# NISO Z39.50 database
+z3950		210/udp		wais
+ipx		213/tcp				# IPX
+ipx		213/udp
+imap3		220/tcp				# Interactive Mail Access
+imap3		220/udp				# Protocol v3
+ulistserv	372/tcp				# UNIX Listserv
+ulistserv	372/udp
+https		443/tcp				# MCom
+https		443/udp				# MCom
+snpp		444/tcp				# Simple Network Paging Protocol
+snpp		444/udp				# Simple Network Paging Protocol
+saft		487/tcp				# Simple Asynchronous File Transfer
+saft		487/udp				# Simple Asynchronous File Transfer
+npmp-local	610/tcp		dqs313_qmaster	# npmp-local / DQS
+npmp-local	610/udp		dqs313_qmaster	# npmp-local / DQS
+npmp-gui	611/tcp		dqs313_execd	# npmp-gui / DQS
+npmp-gui	611/udp		dqs313_execd	# npmp-gui / DQS
+hmmp-ind	612/tcp		dqs313_intercell# HMMP Indication / DQS
+hmmp-ind	612/udp		dqs313_intercell# HMMP Indication / DQS
+#
+# UNIX specific services
+#
+exec		512/tcp
+biff		512/udp		comsat
+login		513/tcp
+who		513/udp		whod
+shell		514/tcp		cmd		# no passwords used
+syslog		514/udp
+printer		515/tcp		spooler		# line printer spooler
+talk		517/udp
+ntalk		518/udp
+route		520/udp		router routed	# RIP
+timed		525/udp		timeserver
+tempo		526/tcp		newdate
+courier		530/tcp		rpc
+conference	531/tcp		chat
+netnews		532/tcp		readnews
+netwall		533/udp				# -for emergency broadcasts
+uucp		540/tcp		uucpd		# uucp daemon
+afpovertcp	548/tcp				# AFP over TCP
+afpovertcp	548/udp				# AFP over TCP
+remotefs	556/tcp		rfs_server rfs	# Brunhoff remote filesystem
+klogin		543/tcp				# Kerberized `rlogin' (v5)
+kshell		544/tcp		krcmd		# Kerberized `rsh' (v5)
+kerberos-adm	749/tcp				# Kerberos `kadmin' (v5)
+#
+webster		765/tcp				# Network dictionary
+webster		765/udp
+#
+# From ``Assigned Numbers'':
+#
+#> The Registered Ports are not controlled by the IANA and on most systems
+#> can be used by ordinary user processes or programs executed by ordinary
+#> users.
+#
+#> Ports are used in the TCP [45,106] to name the ends of logical
+#> connections which carry long term conversations.  For the purpose of
+#> providing services to unknown callers, a service contact port is
+#> defined.  This list specifies the port used by the server process as its
+#> contact port.  While the IANA can not control uses of these ports it
+#> does register or list uses of these ports as a convienence to the
+#> community.
+#
+nfsdstatus	1110/tcp
+nfsd-keepalive	1110/udp
+
+ingreslock	1524/tcp
+ingreslock	1524/udp
+prospero-np	1525/tcp			# Prospero non-privileged
+prospero-np	1525/udp
+datametrics	1645/tcp	old-radius	# datametrics / old radius entry
+datametrics	1645/udp	old-radius	# datametrics / old radius entry
+sa-msg-port	1646/tcp	old-radacct	# sa-msg-port / old radacct entry
+sa-msg-port	1646/udp	old-radacct	# sa-msg-port / old radacct entry
+radius		1812/tcp			# Radius
+radius		1812/udp			# Radius
+radacct		1813/tcp			# Radius Accounting
+radacct		1813/udp			# Radius Accounting
+nfsd		2049/tcp	nfs
+nfsd		2049/udp	nfs
+cvspserver	2401/tcp			# CVS client/server operations
+cvspserver	2401/udp			# CVS client/server operations
+mysql		3306/tcp			# MySQL
+mysql		3306/udp			# MySQL
+rfe		5002/tcp			# Radio Free Ethernet
+rfe		5002/udp			# Actually uses UDP only
+cfengine	5308/tcp			# CFengine
+cfengine	5308/udp			# CFengine
+bbs		7000/tcp			# BBS service
+#
+#
+# Kerberos (Project Athena/MIT) services
+# Note that these are for Kerberos v4, and are unofficial.  Sites running
+# v4 should uncomment these and comment out the v5 entries above.
+#
+kerberos4	750/udp		kerberos-iv kdc	# Kerberos (server) udp
+kerberos4	750/tcp		kerberos-iv kdc	# Kerberos (server) tcp
+kerberos_master	751/udp				# Kerberos authentication
+kerberos_master	751/tcp				# Kerberos authentication
+passwd_server	752/udp				# Kerberos passwd server
+krb_prop	754/tcp				# Kerberos slave propagation
+krbupdate	760/tcp		kreg		# Kerberos registration
+kpasswd		761/tcp		kpwd		# Kerberos "passwd"
+kpop		1109/tcp			# Pop with Kerberos
+knetd		2053/tcp			# Kerberos de-multiplexor
+zephyr-srv	2102/udp			# Zephyr server
+zephyr-clt	2103/udp			# Zephyr serv-hm connection
+zephyr-hm	2104/udp			# Zephyr hostmanager
+eklogin		2105/tcp			# Kerberos encrypted rlogin
+#
+# Unofficial but necessary (for NetBSD) services
+#
+supfilesrv	871/tcp				# SUP server
+supfiledbg	1127/tcp			# SUP debugging
+#
+# Datagram Delivery Protocol services
+#
+rtmp		1/ddp				# Routing Table Maintenance Protocol
+nbp		2/ddp				# Name Binding Protocol
+echo		4/ddp				# AppleTalk Echo Protocol
+zip		6/ddp				# Zone Information Protocol
+#
+# Services added for the Debian GNU/Linux distribution
+poppassd	106/tcp				# Eudora
+poppassd	106/udp				# Eudora
+mailq		174/tcp				# Mailer transport queue for Zmailer
+mailq		174/tcp				# Mailer transport queue for Zmailer
+omirr		808/tcp		omirrd		# online mirror
+omirr		808/udp		omirrd		# online mirror
+rmtcfg		1236/tcp			# Gracilis Packeten remote config server
+xtel		1313/tcp			# french minitel
+coda_opcons	1355/udp			# Coda opcons            (Coda fs)
+coda_venus	1363/udp			# Coda venus             (Coda fs)
+coda_auth	1357/udp			# Coda auth              (Coda fs)
+coda_udpsrv	1359/udp			# Coda udpsrv            (Coda fs)
+coda_filesrv	1361/udp			# Coda filesrv           (Coda fs)
+codacon		1423/tcp	venus.cmu	# Coda Console           (Coda fs)
+coda_aux1	1431/tcp			# coda auxiliary service (Coda fs)
+coda_aux1	1431/udp			# coda auxiliary service (Coda fs)
+coda_aux2	1433/tcp			# coda auxiliary service (Coda fs)
+coda_aux2	1433/udp			# coda auxiliary service (Coda fs)
+coda_aux3	1435/tcp			# coda auxiliary service (Coda fs)
+coda_aux3	1435/udp			# coda auxiliary service (Coda fs)
+cfinger		2003/tcp			# GNU Finger
+afbackup	2988/tcp			# Afbackup system
+afbackup	2988/udp			# Afbackup system
+icp		3130/tcp			# Internet Cache Protocol (Squid)
+icp		3130/udp			# Internet Cache Protocol (Squid)
+postgres	5432/tcp			# POSTGRES
+postgres	5432/udp			# POSTGRES
+fax		4557/tcp			# FAX transmission service        (old)
+hylafax		4559/tcp			# HylaFAX client-server protocol  (new)
+noclog		5354/tcp			# noclogd with TCP (nocol)
+noclog		5354/udp			# noclogd with UDP (nocol)
+hostmon		5355/tcp			# hostmon uses TCP (nocol)
+hostmon		5355/udp			# hostmon uses TCP (nocol)
+ircd		6667/tcp			# Internet Relay Chat
+ircd		6667/udp			# Internet Relay Chat
+webcache	8080/tcp			# WWW caching service
+webcache	8080/udp			# WWW caching service
+tproxy		8081/tcp			# Transparent Proxy
+tproxy		8081/udp			# Transparent Proxy
+mandelspawn	9359/udp	mandelbrot	# network mandelbrot
+amanda		10080/udp			# amanda backup services
+amandaidx	10082/tcp			# amanda backup services
+amidxtape	10083/tcp			# amanda backup services
+isdnlog		20011/tcp			# isdn logging system
+isdnlog		20011/udp			# isdn logging system
+vboxd		20012/tcp			# voice box system
+vboxd		20012/udp			# voice box system
+binkp           24554/tcp			# Binkley
+binkp           24554/udp			# Binkley
+asp		27374/tcp			# Address Search Protocol
+asp		27374/udp			# Address Search Protocol
+tfido           60177/tcp			# Ifmail
+tfido           60177/udp			# Ifmail
+fido            60179/tcp			# Ifmail
+fido            60179/udp			# Ifmail
+
+# Local services
+

firmware/buildroot/system/skeleton/etc/shadow

@@ -0,0 +1,9 @@
+root::10933:0:99999:7:::
+daemon:*:10933:0:99999:7:::
+bin:*:10933:0:99999:7:::
+sys:*:10933:0:99999:7:::
+sync:*:10933:0:99999:7:::
+mail:*:10933:0:99999:7:::
+www-data:*:10933:0:99999:7:::
+operator:*:10933:0:99999:7:::
+nobody:*:10933:0:99999:7:::

firmware/buildroot/system/skeleton/var/cache

@@ -0,0 +1 @@
+../tmp

firmware/buildroot/system/skeleton/var/lib/misc

@@ -0,0 +1 @@
+../../tmp

firmware/buildroot/system/skeleton/var/lock

@@ -0,0 +1 @@
+../tmp

firmware/buildroot/system/skeleton/var/log

@@ -0,0 +1 @@
+../tmp

firmware/buildroot/system/skeleton/var/run

@@ -0,0 +1 @@
+../run

firmware/buildroot/system/skeleton/var/spool

@@ -0,0 +1 @@
+../tmp

firmware/buildroot/system/skeleton/var/tmp

@@ -0,0 +1 @@
+../tmp