Bump buildroot to 2019.02

2019-03-28 22:49:48 +01:00
parent 5598b1b762
commit 920d307141
5121 changed files with 78550 additions and 46132 deletions
--- a/bsp/buildroot/board/freescale/common/imx/genimage.cfg.template
+++ b/bsp/buildroot/board/freescale/common/imx/genimage.cfg.template
@@ -22,7 +22,7 @@ image sdcard.img {

  partition u-boot {
    in-partition-table = "no"
-    image = "u-boot.imx"
+    image = "%UBOOTBIN%"
    offset = 1024
  }

--- a/bsp/buildroot/board/freescale/common/imx/genimage.cfg.template_imx8
+++ b/bsp/buildroot/board/freescale/common/imx/genimage.cfg.template_imx8
@@ -0,0 +1,40 @@
+# Minimal SD card image for the Freescale iMX8 boards
+#
+# We mimic the .sdcard Freescale's image format:
+# * the SD card must have 33 kB free space at the beginning,
+# * U-Boot is integrated into imx8-boot-sd.bin and is dumped as is,
+# * a FAT partition at offset 8MB is containing Image and DTB files
+# * a single root filesystem partition is required (ext2, ext3 or ext4)
+#
+
+image boot.vfat {
+  vfat {
+    files = {
+      %FILES%
+    }
+  }
+  size = 32M
+}
+
+image sdcard.img {
+  hdimage {
+  }
+
+  partition imx-boot {
+    in-partition-table = "no"
+    image = "imx8-boot-sd.bin"
+    offset = 33K
+  }
+
+  partition boot {
+    partition-type = 0xC
+    bootable = "true"
+    image = "boot.vfat"
+    offset = 8M
+  }
+
+  partition rootfs {
+    partition-type = 0x83
+    image = "rootfs.ext2"
+  }
+}
--- a/bsp/buildroot/board/freescale/common/imx/imx8-bootloader-prepare.sh
+++ b/bsp/buildroot/board/freescale/common/imx/imx8-bootloader-prepare.sh
@@ -0,0 +1,20 @@
+#!/usr/bin/env bash
+
+main ()
+{
+	UBOOT_DTB=$2
+	if [ ! -e "$UBOOT_DTB" ]; then
+		echo "ERROR: couldn't find dtb: $UBOOT_DTB"
+		exit 1
+	fi
+	cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/lpddr4_pmu_train_fw.bin > ${BINARIES_DIR}/u-boot-spl-ddr.bin
+	BL31=${BINARIES_DIR}/bl31.bin BL33=${BINARIES_DIR}/u-boot.bin ${HOST_DIR}/bin/mkimage_fit_atf.sh ${UBOOT_DTB} > ${BINARIES_DIR}/u-boot.its
+	${HOST_DIR}/bin/mkimage -E -p 0x3000 -f ${BINARIES_DIR}/u-boot.its ${BINARIES_DIR}/u-boot.itb
+	rm -f ${BINARIES_DIR}/u-boot.its
+
+	${HOST_DIR}/bin/mkimage_imx8 -fit -signed_hdmi ${BINARIES_DIR}/signed_hdmi_imx8m.bin -loader ${BINARIES_DIR}/u-boot-spl-ddr.bin 0x7E1000 -second_loader ${BINARIES_DIR}/u-boot.itb 0x40200000 0x60000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
+
+	exit $?
+}
+
+main $@
--- a/bsp/buildroot/board/freescale/common/imx/post-image.sh
+++ b/bsp/buildroot/board/freescale/common/imx/post-image.sh
@@ -7,10 +7,10 @@
 #
 dtb_list()
 {
-	local DTB_LIST="$(sed -n 's/^BR2_LINUX_KERNEL_INTREE_DTS_NAME="\([a-z0-9 \-]*\)"$/\1/p' ${BR2_CONFIG})"
+	local DTB_LIST="$(sed -n 's/^BR2_LINUX_KERNEL_INTREE_DTS_NAME="\([\/a-z0-9 \-]*\)"$/\1/p' ${BR2_CONFIG})"

 	for dt in $DTB_LIST; do
-		echo -n "\"$dt.dtb\", "
+		echo -n "\"`basename $dt`.dtb\", "
 	done
 }

@@ -23,6 +23,8 @@ linux_image()
 {
 	if grep -Eq "^BR2_LINUX_KERNEL_UIMAGE=y$" ${BR2_CONFIG}; then
 		echo "\"uImage\""
+	elif grep -Eq "^BR2_LINUX_KERNEL_IMAGE=y$" ${BR2_CONFIG}; then
+		echo "\"Image\""
 	else
 		echo "\"zImage\""
 	fi
@@ -30,20 +32,33 @@ linux_image()

 genimage_type()
 {
-	if grep -Eq "^BR2_TARGET_UBOOT_SPL=y$" ${BR2_CONFIG}; then
+	if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M=y$" ${BR2_CONFIG}; then
+		echo "genimage.cfg.template_imx8"
+	elif grep -Eq "^BR2_TARGET_UBOOT_SPL=y$" ${BR2_CONFIG}; then
 		echo "genimage.cfg.template_spl"
 	else
 		echo "genimage.cfg.template"
 	fi
 }

+uboot_image()
+{
+	if grep -Eq "^BR2_TARGET_UBOOT_FORMAT_DTB_IMX=y$" ${BR2_CONFIG}; then
+		echo "u-boot-dtb.imx"
+	elif grep -Eq "^BR2_TARGET_UBOOT_FORMAT_IMX=y$" ${BR2_CONFIG}; then
+		echo "u-boot.imx"
+	fi
+}
+
 main()
 {
 	local FILES="$(dtb_list) $(linux_image)"
+	local UBOOTBIN="$(uboot_image)"
 	local GENIMAGE_CFG="$(mktemp --suffix genimage.cfg)"
 	local GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"

 	sed -e "s/%FILES%/${FILES}/" \
+		-e "s/%UBOOTBIN%/${UBOOTBIN}/" \
 		board/freescale/common/imx/$(genimage_type) > ${GENIMAGE_CFG}

 	rm -rf "${GENIMAGE_TMP}"
--- a/bsp/buildroot/board/freescale/imx7dsdb/patches/uboot/0001-imx-Create-distinct-pre-processed-mkimage-config-fil.patch
+++ b/bsp/buildroot/board/freescale/imx7dsdb/patches/uboot/0001-imx-Create-distinct-pre-processed-mkimage-config-fil.patch
@@ -0,0 +1,89 @@
+From 27a2cd6a1980adf3002412678c8fdec6528dc47d Mon Sep 17 00:00:00 2001
+From: Trent Piepho <tpiepho@impinj.com>
+Date: Fri, 6 Apr 2018 17:11:27 -0700
+Subject: [PATCH] imx: Create distinct pre-processed mkimage config files
+
+Each imx image is created by a separate sub-make and during this process
+the mkimage config file is run though cpp.
+
+The cpp output is to the same file no matter what imx image is being
+created.
+
+This means if two imx images are generated in parallel they will attempt
+to independently produce the same pre-processed mkimage config file at
+the same time.
+
+Avoid the problem by making the pre-processed config file name unique
+based on the imx image it will be used in.  This way each image will
+create a unique config file and they won't clobber each other when run
+in parallel.
+
+This should fixed the build bug referenced in b5b0e4e3 ("imximage:
+Remove failure when no IVT offset is found").
+
+Cc: Breno Lima <breno.lima@nxp.com>
+Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
+Cc: Fabio Estevam <fabio.estevam@nxp.com>
+Signed-off-by: Trent Piepho <tpiepho@impinj.com>
+Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
+[fabio: Adapted to imx_v2017.03_4.9.11_1.0.0_ga]
+Signed-off-by: Fabio Estevam <festevam@gmail.com>
+---
+ arch/arm/imx-common/Makefile | 15 ++++++++-------
+ 1 file changed, 8 insertions(+), 7 deletions(-)
+
+diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
+index d862258..f1bae8d 100644
+--- a/arch/arm/imx-common/Makefile
+++ b/arch/arm/imx-common/Makefile
+@@ -69,9 +69,11 @@ endif
+ quiet_cmd_cpp_cfg = CFGS    $@
+       cmd_cpp_cfg = $(CPP) $(cpp_flags) -x c -o $@ $<
+ 
+-IMX_CONFIG = $(CONFIG_IMX_CONFIG:"%"=%).cfgtmp
+# mkimage source config file
+IMX_CONFIG = $(CONFIG_IMX_CONFIG:"%"=%)
+ 
+-$(IMX_CONFIG): %.cfgtmp: % FORCE
+# How to create a cpp processed config file, they all use the same source
+%.cfgout: $(IMX_CONFIG) FORCE
+ 	$(Q)mkdir -p $(dir $@)
+ 	$(call if_changed_dep,cpp_cfg)
+ 
+@@ -79,7 +81,7 @@ MKIMAGEFLAGS_u-boot.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) -T imxim
+ 	-e $(CONFIG_SYS_TEXT_BASE)
+ u-boot.imx: MKIMAGEOUTPUT = u-boot.imx.log
+ 
+-u-boot.imx: u-boot.bin $(IMX_CONFIG) $(PLUGIN).bin FORCE
+u-boot.imx: u-boot.bin u-boot.cfgout $(PLUGIN).bin FORCE
+ 	$(call if_changed,mkimage)
+ 
+ ifeq ($(CONFIG_OF_SEPARATE),y)
+@@ -87,16 +89,15 @@ MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) -T i
+ 	-e $(CONFIG_SYS_TEXT_BASE)
+ u-boot-dtb.imx: MKIMAGEOUTPUT = u-boot-dtb.imx.log
+ 
+-u-boot-dtb.imx: u-boot-dtb.bin $(IMX_CONFIG) $(PLUGIN).bin FORCE
+u-boot-dtb.imx: u-boot-dtb.bin u-boot-dtb.cfgout $(PLUGIN).bin FORCE
+ 	$(call if_changed,mkimage)
+ endif
+ 
+ MKIMAGEFLAGS_SPL = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) -T imximage \
+ 	-e $(CONFIG_SPL_TEXT_BASE)
+-
+ SPL: MKIMAGEOUTPUT = SPL.log
+ 
+-SPL: spl/u-boot-spl.bin $(IMX_CONFIG) $(PLUGIN).bin FORCE
+SPL: spl/u-boot-spl.bin spl/u-boot-spl.cfgout $(PLUGIN).bin FORCE
+ 	$(call if_changed,mkimage)
+ 
+ MKIMAGEFLAGS_u-boot.uim = -A arm -O U-Boot -a $(CONFIG_SYS_TEXT_BASE) \
+@@ -124,4 +125,4 @@ cmd_u-boot-nand-spl_imx = (printf '\000\000\000\000\106\103\102\040\001' && \
+ spl/u-boot-nand-spl.imx: SPL FORCE
+ 	$(call if_changed,u-boot-nand-spl_imx)
+ 
+-targets += $(addprefix ../../../,$(IMX_CONFIG) SPL u-boot.uim spl/u-boot-nand-spl.imx)
+targets += $(addprefix ../../../,SPL spl/u-boot-spl.cfgout u-boot-dtb.cfgout u-boot.cfgout u-boot.uim spl/u-boot-nand-spl.imx)
+-- 
+2.7.4
+
--- a/bsp/buildroot/board/freescale/imx8mqevk/readme.txt
+++ b/bsp/buildroot/board/freescale/imx8mqevk/readme.txt
@@ -0,0 +1,80 @@
+***************************
+Freescale i.MX8MQ EVK board
+***************************
+
+This file documents the Buildroot support for the Freescale i.MX8MQ
+EVK board.
+
+Build
+=====
+
+First, configure Buildroot for the i.MX8MQ EVK board:
+
+  make freescale_imx8mqevk_defconfig
+
+Build all components:
+
+  make
+
+You will find in output/images/ the following files:
+  - bl31.bin
+  - boot.vfat
+  - fsl-imx8mq-evk.dtb
+  - Image
+  - imx8-boot-sd.bin
+  - lpddr4_pmu_train_fw.bin
+  - rootfs.ext2
+  - rootfs.ext4
+  - rootfs.tar
+  - sdcard.img
+  - signed_hdmi_imx8m.bin
+  - u-boot.bin
+  - u-boot.imx
+  - u-boot-nodtb.bin
+  - u-boot-spl-ddr.bin
+
+Create a bootable SD card
+=========================
+
+To determine the device associated to the SD card have a look in the
+/proc/partitions file:
+
+  cat /proc/partitions
+
+Buildroot prepares a bootable "sdcard.img" image in the output/images/
+directory, ready to be dumped on a SD card. Launch the following
+command as root:
+
+  dd if=output/images/sdcard.img of=/dev/<your-sd-device>
+
+*** WARNING! This will destroy all the card content. Use with care! ***
+
+For details about the medium image layout, see the definition in
+board/freescale/common/imx/genimage.cfg.template_imx8.
+
+Boot the i.MX8MQ EVK board
+==========================
+
+To boot your newly created system:
+- insert the SD card in the SD slot of the board;
+- Configure the switches as follows:
+SW801:	ON	ON	OFF	OFF
+SW802:	ON	OFF
+- put a micro USB cable into the Debug USB Port and connect using a terminal
+  emulator at 115200 bps, 8n1;
+- power on the board.
+
+Enable HDMI output
+==================
+
+To enable HDMI output at boot you must provide the video kernel boot
+argument.  To set the video boot argument from U-Boot run after
+stopping in U-Boot prompt:
+
+setenv mmcargs 'setenv bootargs console=${console} root=${mmcroot} video=HDMI-A-1:1920x1080-32@60'
+saveenv
+reset
+
+Change screen resolution to suit your connected display.
+
+Enjoy!
--- a/bsp/buildroot/board/freescale/p1025twr/readme.txt
+++ b/bsp/buildroot/board/freescale/p1025twr/readme.txt
@@ -0,0 +1,25 @@
+The bootloader is no longer buildable in the latest Freescale/NXP tree or
+upstream.  As such, retrieve the "Image: SDK V1.2 e500v2 Binary ISO" from
+NXP downloads and follow the release notes for reflashing.
+
+For programming the kernel and rootfs created by buildroot into the flash.
+The fast way is to tftp transfer the files via one of the network interfaces.
+Make sure your devkit has ipaddr and serverip defined to reach your tftp
+server.
+
+(Assuming the default u-boot env from NXP)
+1. Program the DTB to NOR flash
+
+    => setenv dtbfile p1025twr.dtb
+    => run dtbflash
+
+2. Program the kernel and rootfs to NOR flash (reusing orignal rootfs
+   NOR location, as the kernel location is to small)
+
+    => tftpboot $loadaddr uImage; protect off 0xeeb80000 +$filesize; erase 0xeeb80000 +$filesize; cp.b $loadaddr 0xeeb80000 $filesize; protect on 0xeeb80000 +$filesize; cmp.b $loadaddr 0xefa80000 $filesize
+
+3. Booting your new system
+
+    => bootm 0xeeb80000 - 0xefe80000
+
+    You can login with user "root".
--- a/bsp/buildroot/board/freescale/t1040d4rdb/readme.txt
+++ b/bsp/buildroot/board/freescale/t1040d4rdb/readme.txt
@@ -0,0 +1,24 @@
+For the bootloader, NXP has stablized at SDK2.0 (final release). It is
+suggested to download the prebuilt from NXP downloads and follow the
+release notes for reflashing.
+
+To program the kernel and rootfs created by buildroot into the flash. The
+fast way is to tftp transfer the files via one of the network interfaces.
+Make sure your devkit has ipaddr and serverip defined to reach your tftp
+server.
+
+(Assuming the default u-boot env from NXP)
+1. Program the DTB to NOR flash
+
+    => tftpboot $loadaddr t1040d4rdb.dtb; protect off 0xe8800000 +$filesize; erase 0xe8800000 +$filesize; cp.b $loadaddr 0xe8800000 $filesize; protect on 0xe8800000 +$filesize; cmp.b $loadaddr 0xe8800000 $filesize
+
+2. Program the kernel and rootfs to NOR flash
+
+    => tftpboot $loadaddr uImage; protect off 0xe8020000 +$filesize; erase 0xe8020000 +$filesize; cp.b $loadaddr 0xe8020000 $filesize; protect on 0xe8020000 +$filesize; cmp.b $loadaddr 0xe8020000 $filesize
+    => tftpboot $loadaddr rootfs.cpio.uboot; protect off 0xe9300000 +$filesize; erase 0xe9300000 +$filesize; cp.b $loadaddr 0xe9300000 $filesize; protect on 0xe9300000 +$filesize; cmp.b $loadaddr 0xe9300000 $filesize
+
+3. Booting your new system
+
+    => boot
+
+    You can login with user "root".