rpi/domo
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Bump buildroot to 2019.02

Browse Source
This commit is contained in:
NADAL Jean-Baptiste
2019-03-28 22:49:48 +01:00
parent 5598b1b762
commit 920d307141
5121 changed files with 78550 additions and 46132 deletions
Download Patch File Download Diff File Expand all files Collapse all files

7
bsp/buildroot/board/orangepi/orangepi-lite/linux-extras.config
View File

@@ -6,3 +6,10 @@ CONFIG_CFG80211_WEXT=y
# wireless drivers
CONFIG_WLAN=y
# hdmi
CONFIG_DRM_SUN8I_DW_HDMI=y
CONFIG_SUN8I_DE2_CCU=y
# analog audio
CONFIG_SND_SUN8I_CODEC_ANALOG=y

4
bsp/buildroot/board/orangepi/orangepi-lite2/extlinux.conf Normal file
View File

@@ -0,0 +1,4 @@
label linux
kernel /Image
devicetree /sun50i-h6-orangepi-lite2.dtb
append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait

33
bsp/buildroot/board/orangepi/orangepi-lite2/genimage.cfg Normal file
View File

@@ -0,0 +1,33 @@
image boot.vfat {
vfat {
files = {
"Image",
"sun50i-h6-orangepi-lite2.dtb",
"extlinux"
}
}
size = 64M
}
image sdcard.img {
hdimage {
}
partition u-boot {
in-partition-table = "no"
image = "u-boot-sunxi-with-spl.bin"
offset = 8192
size = 1040384 # 1MB - 8192
}
partition boot {
partition-type = 0xC
bootable = "true"
image = "boot.vfat"
}
partition rootfs {
partition-type = 0x83
image = "rootfs.ext4"
}
}

4
bsp/buildroot/board/orangepi/orangepi-lite2/post-build.sh Executable file
View File

@@ -0,0 +1,4 @@
#!/bin/sh
BOARD_DIR="$(dirname $0)"
install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf

44
bsp/buildroot/board/orangepi/orangepi-lite2/readme.txt Normal file
View File

@@ -0,0 +1,44 @@
Intro
=====
This default configuration will allow you to start experimenting with the
buildroot environment for the Orangepi Lite2. With the current configuration
it will bring-up the board, and allow access through the serial console.
Orangepi Lite2 link:
http://www.orangepi.org/Orange%20Pi%20Lite%202/
Wiki link:
https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+Lite2
How to build
============
$ make orangepi_lite2_defconfig
$ make
Note: you will need access to the internet to download the required
sources.
How to write the SD card
========================
Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.
Copy the bootable "sdcard.img" onto an SD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
$ sudo sync
Insert the micro SDcard in your Orangepi Lite2 and power it up. The console
is on the serial line, 115200 8N1.
WiFi
====
# wpa_passphrase ACCESSPOINTNAME >> /etc/wpa_supplicant.conf
(type password and enter)
# wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf -B
# udhcpc -i wlan0
# ping google.com

82
bsp/buildroot/board/orangepi/orangepi-lite2/rootfs_overlay/lib/firmware/brcm/brcmfmac43455-sdio.txt Executable file
View File

@@ -0,0 +1,82 @@
#AP6255_NVRAM_V1.0_29052015
NVRAMRev=$Rev: 498373 $
sromrev=11
vendid=0x14e4
devid=0x43ab
manfid=0x2d0
prodid=0x06e4
macaddr=00:90:4c:c5:12:38
nocrc=1
boardtype=0x6e4
boardrev=0x1304
xtalfreq=37400
#boardflags: 5GHz eTR switch by default
#2.4GHz eTR switch by default
#bit1 for btcoex
boardflags=0x00080201
boardflags2=0x40000000
boardflags3=0x48200100
rxgains2gelnagaina0=0
rxgains2gtrisoa0=0
rxgains2gtrelnabypa0=0
rxgains5gelnagaina0=0
rxgains5gtrisoa0=0
rxgains5gtrelnabypa0=0
rxchain=1
txchain=1
aa2g=1
aa5g=1
tssipos5g=1
tssipos2g=1
femctrl=0
AvVmid_c0=0,157,1,126,1,126,1,126,1,126
pa2ga0=-112,6296,-662
pa2ga1=-165,3699,-515
pa5ga0=-143,6016,-683,-141,6013,-678,-137,5988,-670,-136,5982,-670
pa5ga1=-161,3544,-499,-166,3543,-497,-169,3569,-497,-171,3598,-498
itrsw=1
pdoffset2g40ma0=10
pdoffset40ma0=0xaaaa
pdoffset80ma0=0xaaaa
extpagain5g=2
extpagain2g=2
tworangetssi2g=1
tworangetssi5g=1
# LTECX flags
# WCI2
ltecxmux=0
ltecxpadnum=0x0504
ltecxfnsel=0x22
ltecxgcigpio=0x32
maxp2ga0=64
ofdmlrbw202gpo=0x0033
dot11agofdmhrbw202gpo=0x1553
mcsbw202gpo=0x99355533
maxp5ga0=80,82,76,77
mcsbw205glpo=0x99755000
mcsbw205gmpo=0x9df55000
mcsbw205ghpo=0x99855000
mcsbw405glpo=0xb8555000
mcsbw405gmpo=0xed955000
mcsbw405ghpo=0xd9755000
mcsbw805glpo=0xc8555000
mcsbw805gmpo=0xe9555000
mcsbw805ghpo=0xd9555000
swctrlmap_2g=0x00040004,0x00020002,0x00040004,0x010a02,0x1ff
swctrlmap_5g=0x00100010,0x00200020,0x00100010,0x010a02,0x2f4
swctrlmapext_5g=0x00000000,0x00000000,0x00000000,0x000000,0x000
swctrlmapext_2g=0x00000000,0x00000000,0x00000000,0x000000,0x000
vcodivmode=1
deadman_to=481500000
ed_thresh2g=-54
ed_thresh5g=-54
muxenab=0x10

4
bsp/buildroot/board/orangepi/orangepi-one-plus/extlinux.conf Normal file
View File

@@ -0,0 +1,4 @@
label linux
kernel /Image
devicetree /sun50i-h6-orangepi-one-plus.dtb
append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait

33
bsp/buildroot/board/orangepi/orangepi-one-plus/genimage.cfg Normal file
View File

@@ -0,0 +1,33 @@
image boot.vfat {
vfat {
files = {
"Image",
"sun50i-h6-orangepi-one-plus.dtb",
"extlinux"
}
}
size = 64M
}
image sdcard.img {
hdimage {
}
partition u-boot {
in-partition-table = "no"
image = "u-boot-sunxi-with-spl.bin"
offset = 8192
size = 1040384 # 1MB - 8192
}
partition boot {
partition-type = 0xC
bootable = "true"
image = "boot.vfat"
}
partition rootfs {
partition-type = 0x83
image = "rootfs.ext4"
}
}

4
bsp/buildroot/board/orangepi/orangepi-one-plus/post-build.sh Executable file
View File

@@ -0,0 +1,4 @@
#!/bin/sh
BOARD_DIR="$(dirname $0)"
install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf

37
bsp/buildroot/board/orangepi/orangepi-one-plus/readme.txt Normal file
View File

@@ -0,0 +1,37 @@
Intro
=====
This default configuration will allow you to start experimenting with the
buildroot environment for the Orangepi One Plus. With the current configuration
it will bring-up the board, and allow access through the serial console.
Orangepi One Plus link:
http://www.orangepi.org/OrangePiOneplus/
Wiki link:
https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+One+Plus
This configuration uses U-Boot mainline and kernel mainline.
How to build
============
$ make orangepi_one_plus_defconfig
$ make
Note: you will need access to the internet to download the required
sources.
How to write the SD card
========================
Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.
Copy the bootable "sdcard.img" onto an SD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
$ sudo sync
Insert the micro SDcard in your Orangepi One Plus and power it up. The console
is on the serial line, 115200 8N1.

5
bsp/buildroot/board/orangepi/orangepi-pc/linux.fragment Normal file
View File

@@ -0,0 +1,5 @@
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_REGULATOR_SY8106A=y
CONFIG_DRM_SUN8I_DW_HDMI=y
CONFIG_SUN8I_DE2_CCU=y
CONFIG_SND_SUN8I_CODEC_ANALOG=y

10
bsp/buildroot/board/orangepi/orangepi-zero-plus2/linux-extras.config Normal file
View File

@@ -0,0 +1,10 @@
# wireless core
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
CONFIG_MAC80211=y
CONFIG_CFG80211_WEXT=y
# wireless drivers
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_BRCMFMAC=m

30
bsp/buildroot/board/orangepi/orangepi-zero-plus2/patches/linux/linux-0001-arm64-dts-orange-pi-zero-plus2-fix-sdcard-detect.patch
View File

@@ -1,30 +0,0 @@
From f88e9301948173dd35afad4a6939092c7f269aed Mon Sep 17 00:00:00 2001
From: Sergey Matyukevich <geomatsi@gmail.com>
Date: Fri, 3 Nov 2017 22:58:54 +0300
Subject: [PATCH] arm64: dts: orange-pi-zero-plus2: fix sdcard detect
The sdcard detect pin on orange-pi-zero-plus2 is pulled up.
Fix cd-gpio description to enable sdcard detect.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
index b6b7a56..a42fd79 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
@@ -71,7 +71,7 @@
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
status = "okay";
};
--
1.9.1

54
bsp/buildroot/board/orangepi/orangepi-zero-plus2/rootfs_overlay/lib/firmware/brcm/brcmfmac43430-sdio.txt Normal file
View File

@@ -0,0 +1,54 @@
#AP6212_NVRAM_V1.0_20140603
# 2.4 GHz, 20 MHz BW mode
# The following parameter values are just placeholders, need to be updated.
manfid=0x2d0
prodid=0x0726
vendid=0x14e4
devid=0x43e2
boardtype=0x0726
boardrev=0x1101
boardnum=22
macaddr=00:90:4c:c5:12:38
sromrev=11
boardflags=0x00404201
xtalfreq=26000
nocrc=1
ag0=255
aa2g=1
ccode=ALL
pa0itssit=0x20
extpagain2g=0
#PA parameters for 2.4GHz, measured at CHIP OUTPUT
pa2ga0=-168,7161,-820
AvVmid_c0=0x0,0xc8
cckpwroffset0=5
# PPR params
maxp2ga0=90
txpwrbckof=6
cckbw202gpo=0x5555
legofdmbw202gpo=0x77777777
mcsbw202gpo=0xaaaaaaaa
# OFDM IIR :
ofdmdigfilttype=7
# PAPD mode:
papdmode=2
il0macaddr=00:90:4c:c5:12:38
wl0id=0x431b
#OOB parameters
hostwake=0x40
hostrdy=0x41
usbrdy=0x03
usbrdydelay=100
deadman_to=0xffffffff
# muxenab: 0x1 for UART enable, 0x10 for Host awake
muxenab=0x10
# CLDO PWM voltage settings - 0x4 - 1.1 volt
#cldo_pwm=0x4

3
bsp/buildroot/board/orangepi/orangepi-zero/linux-extras.config
View File

@@ -15,3 +15,6 @@ CONFIG_CFG80211_WEXT=y
# wireless drivers
CONFIG_WLAN=y
# ondemand cpufreq governor
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y