rpi/domo
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Bump buildroot to 2019.02

Browse Source
This commit is contained in:
NADAL Jean-Baptiste
2019-03-28 22:49:48 +01:00
parent 5598b1b762
commit 920d307141
5121 changed files with 78550 additions and 46132 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
bsp/buildroot/board/raspberrypi/genimage-raspberrypi0.cfg
View File

@@ -2,7 +2,6 @@ image boot.vfat {
vfat {
files = {
"bcm2708-rpi-b-plus.dtb",
"bcm2708-rpi-0-w.dtb",
"rpi-firmware/bootcode.bin",
"rpi-firmware/cmdline.txt",
"rpi-firmware/config.txt",

31
bsp/buildroot/board/raspberrypi/genimage-raspberrypi0w.cfg Normal file
View File

@@ -0,0 +1,31 @@
image boot.vfat {
vfat {
files = {
"bcm2708-rpi-0-w.dtb",
"rpi-firmware/bootcode.bin",
"rpi-firmware/cmdline.txt",
"rpi-firmware/config.txt",
"rpi-firmware/fixup.dat",
"rpi-firmware/start.elf",
"rpi-firmware/overlays",
"zImage"
}
}
size = 32M
}
image sdcard.img {
hdimage {
}
partition boot {
partition-type = 0xC
bootable = "true"
image = "boot.vfat"
}
partition rootfs {
partition-type = 0x83
image = "rootfs.ext4"
}
}

1
bsp/buildroot/board/raspberrypi/genimage-raspberrypi3-64.cfg
View File

@@ -2,6 +2,7 @@ image boot.vfat {
vfat {
files = {
"bcm2710-rpi-3-b.dtb",
"bcm2710-rpi-3-b-plus.dtb",
"bcm2837-rpi-3-b.dtb",
"rpi-firmware/bootcode.bin",
"rpi-firmware/cmdline.txt",

1
bsp/buildroot/board/raspberrypi/genimage-raspberrypi3.cfg
View File

@@ -2,6 +2,7 @@ image boot.vfat {
vfat {
files = {
"bcm2710-rpi-3-b.dtb",
"bcm2710-rpi-3-b-plus.dtb",
"bcm2710-rpi-cm3.dtb",
"rpi-firmware/bootcode.bin",
"rpi-firmware/cmdline.txt",

4
bsp/buildroot/board/raspberrypi/post-image.sh
View File

@@ -23,11 +23,11 @@ __EOF__
--aarch64)
# Run a 64bits kernel (armv8)
sed -e '/^kernel=/s,=.*,=Image,' -i "${BINARIES_DIR}/rpi-firmware/config.txt"
if ! grep -qE '^arm_control=0x200' "${BINARIES_DIR}/rpi-firmware/config.txt"; then
if ! grep -qE '^arm_64bit=1' "${BINARIES_DIR}/rpi-firmware/config.txt"; then
cat << __EOF__ >> "${BINARIES_DIR}/rpi-firmware/config.txt"
# enable 64bits support
arm_control=0x200
arm_64bit=1
__EOF__
fi

3
bsp/buildroot/board/raspberrypi/readme.txt
View File

@@ -30,7 +30,7 @@ For model 2 B:
$ make raspberrypi2_defconfig
For model 3 B:
For model 3 B and B+:
$ make raspberrypi3_defconfig
@@ -56,6 +56,7 @@ After building, you should obtain this tree:
+-- bcm2708-rpi-b-plus.dtb [1]
+-- bcm2709-rpi-2-b.dtb [1]
+-- bcm2710-rpi-3-b.dtb [1]
+-- bcm2710-rpi-3-b-plus.dtb [1]
+-- boot.vfat
+-- rootfs.ext4
+-- rpi-firmware/