Update buidlroot to version 2016.08.1

bsp/buildroot/board/arm/juno/readme.txt

@@ -6,6 +6,7 @@ Intro
 These instructions apply to all models of the ARM Juno:
   - Juno r0 (does not support PCIe)
   - Juno r1 (supports PCIe)
+  - Juno r2 (Big Cluster with A72)
 
 Buildroot will generate the kernel image, device tree blob and a
 minimal root filesystem.
@@ -41,6 +42,7 @@ After building, you should obtain this tree:
     +-- rootfs.tar
     +-- juno.dtb (if Juno r0 is used)
     +-- juno-r1.dtb (if Juno r1 is used)
+    +-- juno-r2.dtb (if Juno r2 is used)
     +-- Image
 
 Preparing your rootfs
@@ -89,6 +91,19 @@ NOR3LOAD: 00000000               ;Image Load Address
 NOR3ENTRY: 00000000              ;Image Entry Point
 ......
 
+Configure *.dtb in the boot configuration for Juno r2
+=====================================================
+
+SITE1/HBI0262D/images.txt
+......
+NOR3UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR3ADDRESS: 0x02000000          ;Image Flash Address
+NOR3FILE: \SOFTWARE\juno-r2.dtb  ;Image File Name
+NOR3NAME: board.dtb              ;Specify target filename to preserve file extension
+NOR3LOAD: 00000000               ;Image Load Address
+NOR3ENTRY: 00000000              ;Image Entry Point
+......
+
 Installing kernel image and DTB
 ===============================
 
@@ -97,7 +112,7 @@ Installing kernel image and DTB
    A mass storage device should appear in your desktop.
 3. Open the software/ folder
 4. Copy the 'Image' file to software/
-5. Copy the 'juno-r1.dtb' (r1) or the 'juno.dtb' (r0) file to software/
+5. Copy the 'juno-r1.dtb' (r1), 'juno.dtb' (r0) or juno-r2.dtb (r2) file to software/
 6. Press the red button in the front pannel of ARM Juno
 
 At this time, the board will erase the Flash entry for each new item and