Update buidlroot to version 2016.08.1

bsp/buildroot/board/boundarydevices/common/6x_bootscript.txt

@@ -0,0 +1,132 @@
+setenv bootargs ''
+
+if itest.s x6SX == "x${cpu}" || itest.s x7D == "x${cpu}"; then
+	a_script=0x80800000
+	a_zImage=0x80800000
+	a_fdt=0x83000000
+	m4=''
+	if itest.s "x1" == "x$m4enabled" ; then
+		run m4boot;
+		m4='-m4';
+	fi
+else
+	a_script=0x10800000
+	a_zImage=0x10800000
+	a_fdt=0x13000000
+fi
+
+setenv initrd_high 0xffffffff
+if itest.s "x" == "x${dtbname}" ; then
+	if itest.s x6SOLO == "x${cpu}" ; then
+		dtbname=imx6dl-${board}.dtb;
+	elif itest.s x6DL == "x${cpu}" ; then
+		dtbname=imx6dl-${board}.dtb;
+	elif itest.s x6QP == "x${cpu}" ; then
+		dtbname=imx6qp-${board}.dtb;
+	elif itest.s x6SX == "x${cpu}" ; then
+		dtbname=imx6sx-${board}${m4}.dtb;
+	elif itest.s x7D == "x${cpu}" ; then
+		dtbname=imx7d-${board}${m4}.dtb;
+	else
+		dtbname=imx6q-${board}.dtb;
+	fi
+fi
+
+if load ${dtype} ${disk}:1 ${a_script} uEnv.txt ; then
+    env import -t ${a_script} ${filesize}
+fi
+
+if itest.s x == x${bootdir} ; then
+	bootdir=/boot/
+fi
+
+if itest.s x${bootpart} == x ; then
+	bootpart=1
+fi
+
+if load ${dtype} ${disk}:${bootpart} ${a_fdt} ${bootdir}${dtbname} ; then
+	fdt addr ${a_fdt}
+	setenv fdt_high 0xffffffff
+else
+	echo "!!!! Error loading ${bootdir}${dtbname}";
+	exit;
+fi
+
+cmd_xxx_present=
+fdt resize
+if itest.s "x" != "x${cmd_custom}" ; then
+	run cmd_custom
+	cmd_xxx_present=1;
+fi
+
+if itest.s "x" != "x${cmd_hdmi}" ; then
+	run cmd_hdmi
+	cmd_xxx_present=1;
+	if itest.s x == x${allow_noncea} ; then
+		setenv bootargs ${bootargs} mxc_hdmi.only_cea=1;
+		echo "only CEA modes allowed on HDMI port";
+	else
+		setenv bootargs ${bootargs} mxc_hdmi.only_cea=0;
+		echo "non-CEA modes allowed on HDMI, audio may be affected";
+	fi
+fi
+
+if itest.s "x" != "x${cmd_lcd}" ; then
+	run cmd_lcd
+	cmd_xxx_present=1;
+fi
+if itest.s "x" != "x${cmd_lvds}" ; then
+	run cmd_lvds
+	cmd_xxx_present=1;
+fi
+if itest.s "x" != "x${cmd_lvds2}" ; then
+	run cmd_lvds2
+	cmd_xxx_present=1;
+fi
+
+if itest.s "x" == "x${cmd_xxx_present}" ; then
+	echo "!!!!!!!!!!!!!!!!"
+	echo "warning: your u-boot may be outdated, please upgrade"
+	echo "!!!!!!!!!!!!!!!!"
+fi
+
+setenv bootargs "${bootargs} console=${console},115200 vmalloc=400M consoleblank=0 rootwait fixrtc"
+
+bpart=1
+
+if test "sata" = "${dtype}" ; then
+	setenv bootargs "${bootargs} root=/dev/sda${bpart}" ;
+elif test "usb" = "${dtype}" ; then
+	setenv bootargs "${bootargs} root=/dev/sda${bpart}" ;
+else
+	setenv bootargs "${bootargs} root=/dev/mmcblk${disk}p${bpart}"
+fi
+
+if itest.s "x" != "x${disable_giga}" ; then
+	setenv bootargs ${bootargs} fec.disable_giga=1
+fi
+
+if itest.s "x" != "x${wlmac}" ; then
+	setenv bootargs ${bootargs} wlcore.mac=${wlmac}
+fi
+
+if itest.s "x" != "x${gpumem}" ; then
+	setenv bootargs ${bootargs} galcore.contiguousSize=${gpumem}
+fi
+
+if itest.s "x" != "x${cma}" ; then
+	setenv bootargs ${bootargs} cma=${cma}
+fi
+
+if itest.s "x" != "x${show_fdt}" ; then
+	fdt print /
+fi
+
+if itest.s "x" != "x${show_env}" ; then
+	printenv
+fi
+
+if load ${dtype} ${disk}:${bootpart} ${a_zImage} ${bootdir}/zImage ; then
+	bootz ${a_zImage} - ${a_fdt}
+fi
+echo "Error loading kernel image"

bsp/buildroot/board/boundarydevices/common/6x_upgrade.txt

@@ -0,0 +1,69 @@
+if itest.s a$uboot_defconfig == a; then
+        echo "Please set uboot_defconfig to the appropriate value"
+        exit
+fi
+
+offset=0x400
+a_uImage1=0x12000000
+a_uImage2=0x12400000
+
+if itest.s x6SX == "x${cpu}" || itest.s x7D == "x${cpu}"; then
+	a_uImage1=0x82000000
+	a_uImage2=0x82400000
+fi
+
+setenv stdout serial,vga
+echo "check U-Boot" ;
+
+if load ${dtype} ${disk}:1 ${a_uImage1} u-boot.$uboot_defconfig ; then
+else
+	echo "No U-Boot image found on SD card" ;
+	exit
+fi
+echo "read $filesize bytes from SD card" ;
+if sf probe || sf probe || sf probe 1 27000000 || sf probe 1 27000000 ; then
+	echo "probed SPI ROM" ;
+else
+	echo "Error initializing EEPROM" ;
+	exit
+fi ;
+if sf read ${a_uImage2} $offset $filesize ; then
+else
+	echo "Error reading boot loader from EEPROM" ;
+	exit
+fi
+if cmp.b ${a_uImage1} ${a_uImage2} $filesize ; then
+	echo "------- U-Boot versions match" ;
+	exit
+fi
+echo "Need U-Boot upgrade" ;
+echo "Program in 5 seconds" ;
+for n in 5 4 3 2 1 ; do
+	echo $n ;
+	sleep 1 ;
+done
+echo "erasing" ;
+sf erase 0 0xC0000 ;
+
+# two steps to prevent bricking
+echo "programming" ;
+setexpr a1 ${a_uImage1} + 0x400
+setexpr o1 ${offset} + 0x400
+setexpr s1 ${filesize} - 0x400
+sf write ${a1} ${o1} ${s1} ;
+sf write ${a_uImage1} $offset 0x400 ;
+
+echo "verifying" ;
+if sf read ${a_uImage2} $offset $filesize ; then
+else
+	echo "Error re-reading EEPROM" ;
+	exit
+fi
+if cmp.b ${a_uImage1} ${a_uImage2} $filesize ; then
+else
+	echo "Read verification error" ;
+	exit
+fi
+while echo "---- U-Boot upgraded. reset" ; do
+	sleep 120
+done

bsp/buildroot/board/boundarydevices/common/genimage.cfg

@@ -0,0 +1,16 @@
+image sdcard.img {
+	hdimage {
+	}
+
+	partition u-boot {
+		in-partition-table = "no"
+		image = "u-boot.imx"
+		offset = 1024
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+		size = 512M
+	}
+}

bsp/buildroot/board/boundarydevices/common/post-build.sh

@@ -0,0 +1,20 @@
+#!/bin/sh
+# post-build fixups
+# for further details, see
+#
+#  http://boundarydevices.com/u-boot-on-i-mx6/
+#
+
+BOARD_DIR="$(dirname $0)"
+
+# bd u-boot looks for bootscript here
+$HOST_DIR/usr/bin/mkimage -A arm -O linux -T script -C none -a 0 -e 0 \
+-n "boot script" -d $BOARD_DIR/6x_bootscript.txt $TARGET_DIR/6x_bootscript
+
+# u-boot / update script for bd upgradeu command
+if [ -e $BINARIES_DIR/u-boot.imx ];
+then
+    install -D -m 0644 $BINARIES_DIR/u-boot.imx $TARGET_DIR/u-boot.imx
+    $HOST_DIR/usr/bin/mkimage -A arm -O linux -T script -C none -a 0 -e 0 \
+    -n "upgrade script" -d $BOARD_DIR/6x_upgrade.txt $TARGET_DIR/6x_upgrade
+fi

bsp/buildroot/board/boundarydevices/common/post-image.sh

@@ -0,0 +1,16 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname $0)"
+GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage                           \
+	--rootpath "${TARGET_DIR}"     \
+	--tmppath "${GENIMAGE_TMP}"    \
+	--inputpath "${BINARIES_DIR}"  \
+	--outputpath "${BINARIES_DIR}" \
+	--config "${GENIMAGE_CFG}"
+
+exit $?

bsp/buildroot/board/boundarydevices/common/readme.txt

@@ -0,0 +1,30 @@
+Buildroot for Boundary Devices platforms:
+
+https://boundarydevices.com/product-category/popular-sbc-and-som-modules/
+
+Here is the list of targeted platforms per defconfig:
+
+- nitrogen6x_defconfig
+  - BD-SL-i.MX6 (SABRE-Lite)
+  - Nitrogen6X
+  - Nitrogen6_Lite
+  - Nitrogen6_MAX
+  - Nitrogen6_VM
+  - Nitrogen6_SOM
+  - Nitrogen6_SOMv2
+
+- nitrogen6sx_defconfig
+  - Nitrogen6_SoloX
+
+- nitrogen7_defconfig
+  - Nitrogen7
+
+To install, simply copy the image to a uSD card:
+
+$ sudo dd if=output/images/sdcard.img of=/dev/sdX
+
+Where 'sdX' is the device node of the uSD partition.
+
+To upgrade u-boot, cancel autoboot and type:
+
+> run upgradeu