Update buidlroot to version 2016.08.1

bsp/buildroot/board/technexion/imx6ulpico/readme.txt

@@ -0,0 +1,70 @@
+*****************************
+Technexion i.MX6UL Pico board
+*****************************
+
+This file documents the Buildroot support for the Technexion i.MX6UL Pico board.
+
+Build
+=====
+
+First, configure Buildroot for the i.MX6UL Pico board:
+
+  make imx6ulpico_defconfig
+
+Build all components:
+
+  make
+
+You will find in output/images/ the following files:
+  - imx6ul-pico-hobbit.dtb
+  - rootfs.ext4
+  - rootfs.tar
+  - sdcard.img
+  - u-boot.imx
+  - zImage
+
+Create a bootable SD card
+=========================
+
+In the U-Boot prompt lauch:
+
+=> ums 0 mmc 0
+
+This will mount the eMMC content in the host PC as a mass storage device.
+
+To determine the device associated to the eMMC card have a look in the
+/proc/partitions file:
+
+  cat /proc/partitions
+
+Buildroot prepares a bootable "sdcard.img" image in the output/images/
+directory, ready to be dumped on the eMMC card. Launch the following
+command as root:
+
+  dd if=output/images/sdcard.img of=/dev/<your-sd-device>
+
+*** WARNING! This will destroy all the card content. Use with care! ***
+
+For details about the medium image layout, see the definition in
+board/technexion/imx6ulpico/genimage.cfg.
+
+Boot the i.MX6UL Pico board
+=========================
+
+To boot your newly created system:
+- put a micro USB cable into the Debug USB Port and connect using a terminal
+  emulator at 115200 bps, 8n1;
+- power on the board.
+
+Using Wifi
+==========
+
+# modprobe brcmfmac
+# iwconfig wlan0 essid ACCESSPOINTNAME
+# wpa_passphrase ACCESSPOINTNAME > /etc/wpa.conf
+(enter the wifi password and press enter)
+# wpa_supplicant -Dwext -iwlan0 -c /etc/wpa.conf &
+# udhcpc -i wlan0
+# ping buildroot.org
+
+Enjoy!