Update buidlroot to version 2016.08.1

bsp/buildroot/board/technologic/ts4800/genimage.cfg

@@ -0,0 +1,37 @@
+image boot.vfat {
+        vfat {
+                files = {
+                        "zImage",
+                        "imx51-ts4800.dtb"
+                }
+        }
+        size = 8M
+}
+
+image sdcard.img {
+        hdimage {
+        }
+
+        partition mbrboot {
+                in-partition-table = "no"
+                image = "mbrboot.bin"
+                offset = 0
+        }
+
+        partition uboot {
+                partition-type = 0xda
+                image = "u-boot.bin"
+                size = 256k
+        }
+
+        partition kernel {
+                partition-type = 0xC
+                image = "boot.vfat"
+        }
+
+        partition rootfs {
+                partition-type = 0x83
+                image = "rootfs.ext4"
+                size = 256M
+        }
+}

bsp/buildroot/board/technologic/ts4800/linux.fragment

@@ -0,0 +1,3 @@
+CONFIG_TOUCHSCREEN_TS4800=y
+CONFIG_TS4800_WATCHDOG=y
+CONFIG_TS4800_IRQ=y

bsp/buildroot/board/technologic/ts4800/post-image.sh

@@ -0,0 +1,19 @@
+#!/bin/bash
+#
+# Copyright (C) 2015 Savoir-faire Linux
+# Post image generation script.
+
+BOARD_DIR="$(dirname $0)"
+GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
+GENIMAGE_TMP=${BUILD_DIR}/.genimage_tmp
+
+rm -rf ${GENIMAGE_TMP}
+
+${HOST_DIR}/usr/bin/genimage \
+        --config ${GENIMAGE_CFG} \
+        --rootpath ${TARGET_DIR} \
+        --tmppath ${GENIMAGE_TMP} \
+        --inputpath $BINARIES_DIR \
+        --outputpath $BINARIES_DIR
+
+exit $?

bsp/buildroot/board/technologic/ts4800/readme.txt

@@ -0,0 +1,50 @@
+Technologic Systems TS-4800
+===========================
+
+This document explains how to set up a basic Buildroot system for the
+Technologic Systems TS-4800 System on Module.
+
+The TS-4800 is a TS-SOCKET macrocontroller board based on the Freescale
+i.MX515 ARM Cortex-A8 CPU running at 800MHz. The TS-4800 features 10/100
+Ethernet, high speed USB host and device (OTG), microSD card, and 256MB
+XNAND drive.  More details on the board here:
+	http://wiki.embeddedarm.com/wiki/TS-4800
+
+The TS-4800 is supported by mainline Linux as of 4.5 and by U-boot as of
+v2016-07. The defconfig includes a custom 1st level bootloader located
+in boot/ts4800-mbrboot. This one scans the SD card's partition table to
+find partition having the 0xDA type, corresponding to U-boot.
+
+To build the default configuration you only have to:
+
+	$ make ts4800_defconfig
+	$ make
+
+The ouput looks like:
+	output/images/
+	├── boot.vfat
+	├── imx51-ts4800.dtb
+	├── mbrboot.bin
+	├── rootfs.ext2
+	├── rootfs.ext4 -> rootfs.ext2
+	├── rootfs.tar
+	├── sdcard.img
+	├── u-boot.bin
+	└── zImage
+
+The provided post-image script generates an image file containing 3
+partitions for U-boot, Linux kernel + device tree and rootfs
+respectively:
+	$ fdisk output/images/sdcard.img
+	                   Device Boot Start    End Blocks Id  System
+	output/images/sdcard.img1          1    512    256 da  Non-FS data
+	output/images/sdcard.img2        513  16896   8192  c  W95 FAT32 (LBA)
+	output/images/sdcard.img3      16897 541184 262144 83  Linux
+
+This image can be directly written to an SD card.
+
+	$ sudo dd if=output/images/sdcard.img of=/dev/mmcblk0
+
+In order to test the image on TS-4800 board, a TS baseboard, such as
+TS-8xxx the serie, is needed to provide power, console header, RJ45
+connector etc.