update buildroot to 2017.02.11

bsp/buildroot-2017.02.11/board/minnowboard/fs-overlay-graphical/etc/X11/Xsession

@@ -0,0 +1,7 @@
+# Start a terminal on the top left corner
+xterm -geom 80x30+0+0 &
+
+# OpenGL demo
+glmark2 &
+
+exec /usr/bin/openbox-session

bsp/buildroot-2017.02.11/board/minnowboard/fs-overlay-graphical/etc/asound.conf

@@ -0,0 +1,4 @@
+# Customize ALSA:
+# the HDMI PCM is at card=0, device=3 (i.e. hw:0,3)
+defaults.pcm.card 0
+defaults.pcm.device 3

bsp/buildroot-2017.02.11/board/minnowboard/genimage.cfg

@@ -0,0 +1,34 @@
+# Create an image of the efi partition
+image efi-part.vfat {
+	vfat {
+		file startup.nsh {
+			image = "efi-part/startup.nsh"
+		}
+		file EFI {
+			image = "efi-part/EFI"
+		}
+		file bzImage {
+			image = "bzImage"
+		}
+	}
+	size=10M
+}
+
+# Create the sdcard image, pulling in
+#  * the image created by buildroot
+#  * the efi-partition created above
+image sdcard.img {
+	hdimage {
+	}
+
+	partition boot {
+		partition-type = 0xEF
+		image = "efi-part.vfat"
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+		size = 512M
+	}
+}

bsp/buildroot-2017.02.11/board/minnowboard/grub-minnowboard-max.cfg

@@ -0,0 +1,6 @@
+set default="0"
+set timeout="5"
+
+menuentry "Buildroot" {
+	linux /bzImage root=/dev/mmcblk2p2 rootwait console=tty0 console=ttyS0,115200
+}

bsp/buildroot-2017.02.11/board/minnowboard/grub-minnowboard.cfg

@@ -0,0 +1,6 @@
+set default="0"
+set timeout="5"
+
+menuentry "Buildroot" {
+	linux /bzImage root=/dev/mmcblk0p2 rootwait console=ttyPCH0,115200
+}

bsp/buildroot-2017.02.11/board/minnowboard/linux-3.8.config

@@ -0,0 +1,172 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_RCU_FANOUT=32
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_SWAP=y
+CONFIG_MEMCG_KMEM=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+CONFIG_NAMESPACES=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EMBEDDED=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_SMP=y
+CONFIG_MATOM=y
+CONFIG_SCHED_SMT=y
+CONFIG_PREEMPT=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_CHECK_BIOS_CORRUPTION=y
+# CONFIG_MTRR_SANITIZER is not set
+CONFIG_EFI=y
+CONFIG_EFI_STUB=y
+CONFIG_HZ_1000=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_ADVANCED_DEBUG=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_X86_ACPI_CPUFREQ=y
+CONFIG_INTEL_IDLE=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_MSI=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_FW_LOADER=m
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_PCH_PHUB=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_NETCONSOLE=y
+CONFIG_TUN=m
+CONFIG_PCH_GBE=m
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO_POLLED=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_PCH_UART=y
+CONFIG_SERIAL_PCH_UART_CONSOLE=y
+CONFIG_GEN_RTC=y
+CONFIG_GEN_RTC_X=y
+CONFIG_HPET=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_EG20T=m
+CONFIG_SPI=y
+CONFIG_SPI_GPIO=m
+CONFIG_SPI_TOPCLIFF_PCH=m
+CONFIG_SPI_SPIDEV=m
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_GPIO_SCH=y
+CONFIG_GPIO_PCH=y
+CONFIG_WATCHDOG=y
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_AGP=m
+CONFIG_DRM=m
+CONFIG_FB=y
+CONFIG_FB_EFI=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_HDA_INTEL=m
+CONFIG_USB=y
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=m
+CONFIG_USB_EG20T=m
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PCI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_DMADEVICES=y
+CONFIG_PCH_DMA=y
+CONFIG_MINNOWBOARD=y
+CONFIG_MINNOWBOARD_GPIO=m
+CONFIG_MINNOWBOARD_KEYS=m
+CONFIG_EFI_VARS=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_FANOTIFY=y
+CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
+CONFIG_ISO9660_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=m
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_FRAME_WARN=1024
+CONFIG_TIMER_STATS=y
+CONFIG_LATENCYTOP=y
+CONFIG_BLK_DEV_IO_TRACE=y

bsp/buildroot-2017.02.11/board/minnowboard/linux-4.8.config

@@ -0,0 +1,58 @@
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_SMP=y
+CONFIG_X86_INTEL_LPSS=y
+CONFIG_MATOM=y
+CONFIG_EFI=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_X86_INTEL_PSTATE=y
+CONFIG_X86_ACPI_CPUFREQ=y
+CONFIG_INTEL_IDLE=y
+CONFIG_IA32_EMULATION=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_ATA_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_R8169=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_I2C_I801=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_I2C_DESIGNWARE_PCI=y
+CONFIG_SPI=y
+CONFIG_SPI_DESIGNWARE=y
+CONFIG_SPI_PXA2XX=y
+CONFIG_PINCTRL_BAYTRAIL=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_AGP=y
+CONFIG_DRM=y
+CONFIG_DRM_LOAD_EDID_FIRMWARE=y
+CONFIG_DRM_I915=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_HDA_INTEL=y
+CONFIG_SND_HDA_CODEC_HDMI=y
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PCI=y
+CONFIG_MMC_SDHCI_ACPI=y
+CONFIG_PWM=y
+CONFIG_EXT4_FS=y

bsp/buildroot-2017.02.11/board/minnowboard/post-build.sh

@@ -0,0 +1,12 @@
+#!/bin/sh
+# args from BR2_ROOTFS_POST_SCRIPT_ARGS
+# $2    board name
+
+cp -v board/minnowboard/grub-${2}.cfg ${BINARIES_DIR}/efi-part/EFI/BOOT/grub.cfg
+
+# Add a console on tty1
+if [ -e ${TARGET_DIR}/etc/inittab ]; then
+    grep -qE '^tty1::' ${TARGET_DIR}/etc/inittab || \
+	sed -i '/GENERIC_SERIAL/a\
+tty1::respawn:/sbin/getty -L  tty1 0 vt100 # HDMI console' ${TARGET_DIR}/etc/inittab
+fi

bsp/buildroot-2017.02.11/board/minnowboard/post-image.sh

@@ -0,0 +1,13 @@
+#!/bin/sh -e
+
+GENIMAGE_CFG="board/minnowboard/genimage.cfg"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage \
+    --rootpath "${TARGET_DIR}" \
+    --tmppath "${GENIMAGE_TMP}" \
+    --inputpath "${BINARIES_DIR}" \
+    --outputpath "${BINARIES_DIR}" \
+    --config "${GENIMAGE_CFG}"

bsp/buildroot-2017.02.11/board/minnowboard/readme.txt

@@ -0,0 +1,32 @@
+How to get started with the MinnowBoard (MAX)
+=============================================
+
+1. Build
+
+  Apply the defconfig:
+
+  $ make minnowboard_defconfig
+
+  Or, for the Minnowboard MAX board:
+
+  $ make minnowboard_max_defconfig
+
+  Add any additional packages required and build:
+
+  $ make
+
+2. Write the SD card
+
+  The build process will create a SD card image in output/images.
+  Write the image to an mSD card, insert into the MinnowBoard
+  and power the board on.
+
+  $ dd if=output/images/sdcard.img of=/dev/mmcblk0; sync
+
+  The system starts two consoles: one on the serial port
+  and one on HDMI.
+
+3. Enjoy
+
+Additional information about this board can be found at
+http://www.minnowboard.org/.