rpi/domo
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Bump buidlroot version to 2018.02.6

Browse Source
This commit is contained in:
jbnadal
2018-10-22 14:55:59 +02:00
parent 222960cedb
commit bec94fdb63
6150 changed files with 84803 additions and 117446 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
bsp/buildroot/board/raspberrypi/genimage-raspberrypi0.cfg
View File

@@ -2,6 +2,7 @@ image boot.vfat {
vfat {
files = {
"bcm2708-rpi-b-plus.dtb",
"bcm2708-rpi-0-w.dtb",
"rpi-firmware/bootcode.bin",
"rpi-firmware/cmdline.txt",
"rpi-firmware/config.txt",

31
bsp/buildroot/board/raspberrypi/genimage-raspberrypi3-64.cfg Normal file
View File

@@ -0,0 +1,31 @@
image boot.vfat {
vfat {
files = {
"bcm2710-rpi-3-b.dtb",
"bcm2837-rpi-3-b.dtb",
"rpi-firmware/bootcode.bin",
"rpi-firmware/cmdline.txt",
"rpi-firmware/config.txt",
"rpi-firmware/fixup.dat",
"rpi-firmware/start.elf",
"Image"
}
}
size = 32M
}
image sdcard.img {
hdimage {
}
partition boot {
partition-type = 0xC
bootable = "true"
image = "boot.vfat"
}
partition rootfs {
partition-type = 0x83
image = "rootfs.ext4"
}
}

1
bsp/buildroot/board/raspberrypi/genimage-raspberrypi3.cfg
View File

@@ -2,6 +2,7 @@ image boot.vfat {
vfat {
files = {
"bcm2710-rpi-3-b.dtb",
"bcm2710-rpi-cm3.dtb",
"rpi-firmware/bootcode.bin",
"rpi-firmware/cmdline.txt",
"rpi-firmware/config.txt",

49
bsp/buildroot/board/raspberrypi/post-image.sh
View File

@@ -1,22 +1,53 @@
#!/bin/sh
#!/bin/bash
set -e
BOARD_DIR="$(dirname $0)"
BOARD_NAME="$(basename ${BOARD_DIR})"
GENIMAGE_CFG="${BOARD_DIR}/genimage-${BOARD_NAME}.cfg"
GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
case "${2}" in
--add-pi3-miniuart-bt-overlay)
if ! grep -qE '^dtoverlay=' "${BINARIES_DIR}/rpi-firmware/config.txt"; then
echo "Adding 'dtoverlay=pi3-miniuart-bt' to config.txt (fixes ttyAMA0 serial console)."
cat << __EOF__ >> "${BINARIES_DIR}/rpi-firmware/config.txt"
for arg in "$@"
do
case "${arg}" in
--add-pi3-miniuart-bt-overlay)
if ! grep -qE '^dtoverlay=' "${BINARIES_DIR}/rpi-firmware/config.txt"; then
echo "Adding 'dtoverlay=pi3-miniuart-bt' to config.txt (fixes ttyAMA0 serial console)."
cat << __EOF__ >> "${BINARIES_DIR}/rpi-firmware/config.txt"
# fixes rpi3 ttyAMA0 serial console
dtoverlay=pi3-miniuart-bt
__EOF__
fi
;;
esac
fi
;;
--aarch64)
# Run a 64bits kernel (armv8)
sed -e '/^kernel=/s,=.*,=Image,' -i "${BINARIES_DIR}/rpi-firmware/config.txt"
if ! grep -qE '^arm_control=0x200' "${BINARIES_DIR}/rpi-firmware/config.txt"; then
cat << __EOF__ >> "${BINARIES_DIR}/rpi-firmware/config.txt"
# enable 64bits support
arm_control=0x200
__EOF__
fi
# Enable uart console
if ! grep -qE '^enable_uart=1' "${BINARIES_DIR}/rpi-firmware/config.txt"; then
cat << __EOF__ >> "${BINARIES_DIR}/rpi-firmware/config.txt"
# enable rpi3 ttyS0 serial console
enable_uart=1
__EOF__
fi
;;
--gpu_mem_256=*|--gpu_mem_512=*|--gpu_mem_1024=*)
# Set GPU memory
gpu_mem="${arg:2}"
sed -e "/^${gpu_mem%=*}=/s,=.*,=${gpu_mem##*=}," -i "${BINARIES_DIR}/rpi-firmware/config.txt"
;;
esac
done
rm -rf "${GENIMAGE_TMP}"