Bump Buildroot Version to buildroot 2019_02_6

bsp/buildroot/CHANGES

@@ -1,3 +1,140 @@
+2019.02.6, Released October 3rd, 2019
+
+	Important / security related fixes.
+
+	Defconfigs: AArch64-efi: Fix grub configuration, Beaglebone:
+	Use default console settings
+
+	Dependencies: Ensure host has JSON::PP perl module installed
+	if webkitgtk/wpewebkit packages are enabled as it is needed
+	during their build process.
+
+	Toolchain: Generate check-headers program under BUILD_DIR
+	rather than /tmp to fix issues with distributions mounting
+	/tmp noexec.
+
+	Updated/fixed packages: asterisk, augeas, bind, bwm-ng, cups,
+	cups-filters, docker-cli, docker-engine, docker-proxy,
+	dropbear, e2fsprogs, eudev, exim, expat, gcc, go, ifplugd,
+	haveged, iptables, joe, kf5-extra-cmake-modules,
+	kf5-modemmanager-qt, kf5-networkmanager-qt, libcurl,
+	libgcrypt, libgpg-error, libnftl, libnspr, libnss, libopenssl,
+	luksmeta, mariadb, mbedtls, mongodb, mosquitto, ncurses,
+	nfs-utils, nghttp2, nodejs, openvmtools, php, protobuf, putty,
+	qemu, qt5base, samba4, swupdate, systemd-bootchart, thttpd,
+	uclibc, unzip, util-linux, wireshark
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#10806: Allow nfs-utils to use ipv6
+	#11781: mariadb build error
+	#12031: Build of cups-filters fails while linking, apparently due..
+	#12141: eudev package is missing "render" and "kvm" groups
+	#12181: dropbear: norootlogin (-w) no longer works when PAM is enabled
+	#12241: Permission denied while running "make"
+
+2019.02.5, Released September 2nd, 2019
+
+	Important / security related fixes.
+
+	Filesystems: Pass extra pax options to tar for binary
+	reproducibility.
+
+	Updated/fixed packages: apache, arm-trusted-firmware,
+	asterisk, atk, autofs, batctl, batman-adv, berkeleydb, brotli,
+	busybox, bzip2, clamav, cloop, cmake, collectd, connman-gtk,
+	cryptopp, dahdi-linux, dahdi-tools, daq, dehydrated, dovecot,
+	dovecot-pigeonhole,, elfutils, evtest, exim, expect, giflib,
+	git, glib-networking, glibc, gnupg2, gnutls, go,
+	gst1-rtsp-server, gtkperf, gupnp-tools, gvfs, imagemagick,
+	imx-uuc, intel-microcode, json-glib, lftp, libbsd, libcurl,
+	libgit2, libgtk3, libmodplug, libnss, libpri, libshout,
+	libss7, libssh2, libvips, libxcb, linux-headers, mdadm,
+	mesa3d, metacity, mpg123, mosquitto, musl, nginx, openblas,
+	opencv3, openldap, openvmtools, pcmanfm, php, pigpio,
+	postgresql, prboom, proftpd, proj, python, python-django,
+	python-idna, python-numpy, python-urllib3, python3, qemu, qt5,
+	qt5base, qt5enginio, quagga, rygel, squid, subversion,
+	tcpreplay, unzip, vlc, vte, webkitgtk, weston, wireless-regdb,
+	xen, xfont_font-util, xlib_libICE, xlib_libXfont,
+	xlib_libXfont2, yad, zeromq
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#11741: pigpio does not build host-pigpio
+	#11876: automount using host mount/umount
+	#11881: Build breaks with lftp package enabled and libexpat1-dev inst..
+	#11921: dahdi fails to build
+	#11961: libpri build failure
+	#12096: tcpreplay: build fails if libdumbnet-dev is installed in the..
+	#12106: daq: build fails if libdumbnet-dev is installed in the host
+	#12126: vc4 has neon as hard dependency
+
+2019.02.4, Released July 10th, 2019
+
+	Important / security related fixes.
+
+	arch: x86: Fix typo breaking 'core-avx2' variant, add Westmere
+	variant.
+
+	linux: Workaround -Werror related build failure on powerpc,
+	by forcing CONFIG_PPC_DISABLE_WERROR on.
+
+	support/testing: Emulate a machine with 256MB RAM to fix
+	issues with certain tests running out of memory.
+
+	test-pkg: Correct long option handling and clean output dir
+	after a successful build to save disk space.
+
+	Ensure custom <pkg>_OVERRIDE_SRCDIR_RSYNC_EXCLUSIONS are
+	passed before the standard exclusions so they are not ignored
+	by rsync when using override-srcdir.
+
+	Defconfigs: QEMU: use 'rootwait' kernel option to ensure root
+	partition is available before mounting.
+
+	Updated/fixed packages: barebox, bzip2, davfs2, dbus, dialog,
+	docker-cli, docker-engine, expat, faad2, ffmpeg, freeswitch,
+	gerbera, haveged, irssi, libcdadio, libgit2, libglib2,
+	libsecret, libvncserver, lmbench, logrotate, mariadb, meson,
+	mongoose, monit, mpd, openblas, php, postgresql, psplash,
+	python, python-django, python3, qt5base, samba4, taglib,
+	tvheadend, vlc, webkitgtk, xserver_xorg-server, znc
+
+2019.02.3, Released June 7th, 2019
+
+	Important / security related fixes.
+
+	Infra: pkg-config: Use a dedicated timestamp file rather than
+	.config as that gets touched by linux-4.19+, causing repeated
+	builds.
+
+	check-bin-arch: Also ignore /usr/lib/grub to support merged
+	/usr setups, similar to how /lib/grub is ignored.
+
+	gnuconfig/config.sub: Add C-SKY architecture support.
+
+	Updated/fixed packages: assimp, atftp, atop, botan, busybox,
+	ca-certificates, chocolate-doom, cjson, coreutils, cracklib,
+	ddrescue, dhcp, docker-cli, docker-containerd, docker-engine,
+	dosfstools, dovecot, dovecot-pigeonhole, dropbear, exim,
+	ffmpeg, flare-engine, gcc, gdb, gerbera, glibmm, go, gpsd,
+	gst-ffmpeg, gst1-plugins-bad, gst1-plugins-base, imagemagick,
+	intel-microcode, jasper, kf5-kcoreaddons, kismet, libcurl,
+	libglib2, libnss, libopenssl, libsigrok, libssh2, libupnp18,
+	linuxptp, luajit, lynx, matchbox-panel, mender,
+	netcat-openbsd, netsurf, nfs-utils, opus, orc, owfs,
+	pcsc-lite, php, popt, postgresql, python, python-cython,
+	python-django, python-ply, qt5enginio, rpm, runc, samba4,
+	sqlite, subversion, supertux, systemd, tslib, uclibc,
+	v4l2loopback, webkitgtk, woff2
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#11816: Only selected coreutils binaries are installed
+	#11841: grub-efi.cfg not used when building EFI disk image
+	#11911: systemd v240 memory leak in systemd-journald
+
 2019.02.2, Released April 29th, 2019
 
 	Important / security related fixes.

bsp/buildroot/DEVELOPERS

@@ -26,9 +26,6 @@
 #   infrastructure, and will be CC'ed on all patches that add or
 #   modify packages that use this infrastructure.
 
-N:	Abhilash Tuse <abhilash.tuse@imgtec.com>
-F:	package/gstreamer1/gst1-rtsp-server/
-
 N:	Adam Duskett <aduskett@gmail.com>
 F:	package/audit/
 F:	package/busybox/
@@ -127,7 +124,6 @@ N:	Anders Darander <anders@chargestorm.se>
 F:	package/ktap/
 
 N:	André Hentschel <nerv@dawncrow.de>
-F:	package/azure-iot-sdk-c/
 F:	package/libkrb5/
 F:	package/openal/
 F:	package/p7zip/
@@ -148,9 +144,6 @@ F:	package/zstd/
 N:	Andrey Yurovsky <yurovsky@gmail.com>
 F:	package/rauc/
 
-N:	Andy Kennedy <andy.kennedy@adtran.com>
-F:	package/libunwind/
-
 N:	Angelo Compagnucci <angelo.compagnucci@gmail.com>
 F:	package/corkscrew/
 F:	package/fail2ban/
@@ -209,6 +202,7 @@ F:	package/sqlcipher/
 F:	package/stress/
 
 N:	Asaf Kahlon <asafka7@gmail.com>
+F:	package/collectd/
 F:	package/libuv/
 F:	package/python*
 F:	package/zeromq/
@@ -633,9 +627,6 @@ F:	package/unscd/
 N:	Dushara Jayasinghe <nidujay@gmail.com>
 F:	package/prosody/
 
-N:	Ed Swierk <eswierk@skyportsystems.com>
-F:	package/xxhash/
-
 N:	Eric Le Bihan <eric.le.bihan.dev@free.fr>
 F:	docs/manual/adding-packages-meson.txt
 F:	package/adwaita-icon-theme/
@@ -821,11 +812,9 @@ N:	Francois Perrad <francois.perrad@gadz.org>
 F:	board/olimex/a20_olinuxino
 F:	configs/olimex_a20_olinuxino_*
 F:	package/4th/
-F:	package/botan/
 F:	package/chipmunk/
 F:	package/dado/
 F:	package/ficl/
-F:	package/gdbm/
 F:	package/libtomcrypt/
 F:	package/libtommath/
 F:	package/libump/
@@ -843,9 +832,6 @@ F:	package/netsurf/
 F:	package/perl*
 F:	package/pkg-perl.mk
 F:	package/pkg-luarocks.mk
-F:	package/qemu/
-F:	package/sdl2_mixer/
-F:	package/sdl2_net/
 F:	package/tekui/
 F:	package/wsapi-fcgi/
 F:	package/wsapi-xavante/
@@ -897,7 +883,8 @@ F:	package/tesseract-ocr/
 F:	package/webp/
 F:	package/xapian/
 
-N:	Giulio Benetti <giulio.benetti@micronovasrl.com>
+N:	Giulio Benetti <giulio.benetti@benettiengineering.com>
+F:	package/minicom/
 F:	package/sunxi-mali-mainline/
 F:	package/sunxi-mali-mainline-driver/
 
@@ -979,6 +966,7 @@ F:	board/bananapi/
 F:	board/engicam/
 F:	board/friendlyarm/nanopi-a64/
 F:	board/friendlyarm/nanopi-neo2/
+F:	board/olimex/a33_olinuxino/
 F:	board/olimex/a64-olinuxino/
 F:	board/orangepi/orangepi-lite2/
 F:	board/orangepi/orangepi-one-plus
@@ -999,6 +987,7 @@ F:	configs/engicam_imx6ul_geam_defconfig
 F:	configs/engicam_imx6ul_isiot_defconfig
 F:	configs/friendlyarm_nanopi_a64_defconfig
 F:	configs/friendlyarm_nanopi_neo2_defconfig
+F:	configs/olimex_a33_olinuxino_defconfig
 F:	configs/olimex_a64_olinuxino_defconfig
 F:	configs/orangepi_lite2_defconfig
 F:	configs/orangepi_one_plus_defconfig
@@ -1205,9 +1194,6 @@ F:	package/python-pygame/
 N:	Julien Corjon <corjon.j@ecagroup.com>
 F:	package/qt5/
 
-N:	Julien Floret <julien.floret@6wind.com>
-F:	package/lldpd/
-
 N:	Julien Grossholtz <julien.grossholtz@openest.io>
 F:	package/paho-mqtt-c
 
@@ -1227,9 +1213,6 @@ F:	package/cpuload/
 F:	package/bwm-ng/
 F:	package/ramsmp/
 
-N:	Kevin Joly <kevin.joly@sensefly.com>
-F:	package/libgphoto2/
-
 N:	Koen Martens <gmc@sonologic.nl>
 F:	package/capnproto/
 F:	package/linuxconsoletools/
@@ -1333,9 +1316,6 @@ F:	package/luaossl/
 F:	package/rs485conf/
 F:	package/turbolua/
 
-N:	Marcin Nowakowski <marcin.nowakowski@imgtec.com>
-F:	package/libkcapi/
-
 N:	Marcus Folkesson <marcus.folkesson@gmail.com>
 F:	package/libostree/
 F:	package/libselinux/
@@ -1367,10 +1347,6 @@ F:	boot/riscv-pk/
 F:	configs/qemu_riscv32_virt_defconfig
 F:	configs/qemu_riscv64_virt_defconfig
 
-N:	Markos Chandras <markos.chandras@imgtec.com>
-F:	package/harfbuzz/
-F:	package/libsecret/
-
 N:	Martin Bark <martin@barkynet.com>
 F:	board/raspberrypi/
 F:	configs/raspberrypi3_defconfig
@@ -1391,7 +1367,7 @@ F:	package/tslib/
 F:	package/x11r7/xdriver_xf86-input-tslib/
 F:	package/x11vnc/
 
-N:	Mathieu Audat <mathieu.audat@savoirfairelinux.com>
+N:	Mathieu Audat <mathieuaudat@gmail.com>
 F:	board/technologic/ts4900/
 F:	configs/ts4900_defconfig
 F:	package/ts4900-fpga/
@@ -1785,9 +1761,6 @@ F:	package/libdvbpsi/
 F:	package/mraa/
 F:	package/synergy/
 
-N:	Pranit Sirsat <Pranit.Sirsat@imgtec.com>
-F:	package/paho-mqtt-c/
-
 N:	Qais Yousef <Qais.Yousef@imgtec.com>
 F:	package/bellagio/
 
@@ -1818,7 +1791,14 @@ N:	Ricardo Martincoski <ricardo.martincoski@datacom.com.br>
 F:	package/atop/
 
 N:	Ricardo Martincoski <ricardo.martincoski@gmail.com>
-F:	support/testing/
+F:	support/testing/infra/
+F:	support/testing/run-tests
+F:	support/testing/tests/core/test_file_capabilities.py
+F:	support/testing/tests/download/
+F:	support/testing/tests/package/*_python*.py
+F:	support/testing/tests/package/test_atop.py
+F:	support/testing/tests/package/test_syslog_ng.py
+F:	support/testing/tests/utils/test_check_package.py
 F:	utils/check-package
 F:	utils/checkpackagelib/
 
@@ -2040,9 +2020,6 @@ F:	package/tovid/
 F:	package/udftools/
 F:	package/xorriso/
 
-N:	Steve Thomas <scjthm@live.com>
-F:	package/isl/
-
 N:	Steven Noonan <steven@uplinklabs.net>
 F:	package/hwloc/
 F:	package/powertop/
@@ -2180,7 +2157,7 @@ F:	package/pixz/
 N:	Vinicius Tinti <viniciustinti@gmail.com>
 F:	package/python-thrift/
 
-N:	Vivien Didelot <vivien.didelot@savoirfairelinux.com>
+N:	Vivien Didelot <vivien.didelot@gmail.com>
 F:	board/technologic/ts5500/
 F:	configs/ts5500_defconfig
 
@@ -2262,6 +2239,8 @@ F:	package/zisofs-tools/
 F:	support/download/
 
 N:	Yegor Yefremov <yegorslists@googlemail.com>
+F:	configs/beaglebone_defconfig
+F:	configs/beaglebone_qt5_defconfig
 F:	package/acl/
 F:	package/attr/
 F:	package/bluez_utils/
@@ -2270,6 +2249,7 @@ F:	package/bootstrap/
 F:	package/cannelloni/
 F:	package/can-utils/
 F:	package/circus/
+F:	package/dhcpcd/
 F:	package/feh/
 F:	package/giblib/
 F:	package/imlib2/
@@ -2286,6 +2266,7 @@ F:	package/libubox/
 F:	package/libuci/
 F:	package/linux-firmware/
 F:	package/modem-manager/
+F:	package/nftables/
 F:	package/nuttcp/
 F:	package/parted/
 F:	package/phytool/

bsp/buildroot/Makefile

@@ -92,9 +92,9 @@ all:
 .PHONY: all
 
 # Set and export the version string
-export BR2_VERSION := 2019.02.2
+export BR2_VERSION := 2019.02.6
 # Actual time the release is cut (for reproducible builds)
-BR2_VERSION_EPOCH = 1556527000
+BR2_VERSION_EPOCH = 1570115000
 
 # Save running make version since it's clobbered by the make package
 RUNNING_MAKE_VERSION := $(MAKE_VERSION)
@@ -248,7 +248,6 @@ ifeq ($(BR2_REPRODUCIBLE),y)
 export TZ = UTC
 export LANG = C
 export LC_ALL = C
-export GZIP = -n
 endif
 
 # To put more focus on warnings, be less verbose as default
@@ -811,6 +810,7 @@ endif # merged /usr
 .PHONY: target-post-image
 target-post-image: $(TARGETS_ROOTFS) target-finalize staging-finalize
 	@rm -f $(ROOTFS_COMMON_TAR)
+	$(Q)mkdir -p $(BINARIES_DIR)
 	@$(foreach s, $(call qstrip,$(BR2_ROOTFS_POST_IMAGE_SCRIPT)), \
 		$(call MESSAGE,"Executing post-image script $(s)"); \
 		$(EXTRA_ENV) $(s) $(BINARIES_DIR) $(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS))$(sep))

bsp/buildroot/VERSION

@@ -1 +1 @@
-buildroot 2019_02_2
+buildroot 2019_02_6

bsp/buildroot/arch/Config.in.x86

@@ -101,6 +101,15 @@ config BR2_x86_corei7
 	select BR2_X86_CPU_HAS_SSSE3
 	select BR2_X86_CPU_HAS_SSE4
 	select BR2_X86_CPU_HAS_SSE42
+config BR2_x86_westmere
+	bool "westmere"
+	select BR2_X86_CPU_HAS_MMX
+	select BR2_X86_CPU_HAS_SSE
+	select BR2_X86_CPU_HAS_SSE2
+	select BR2_X86_CPU_HAS_SSE3
+	select BR2_X86_CPU_HAS_SSSE3
+	select BR2_X86_CPU_HAS_SSE4
+	select BR2_X86_CPU_HAS_SSE42
 config BR2_x86_corei7_avx
 	bool "corei7-avx"
 	select BR2_X86_CPU_HAS_MMX
@@ -235,8 +244,9 @@ config BR2_ARCH
 	default "i686"		if BR2_x86_nocona && BR2_i386
 	default "i686"		if BR2_x86_core2 && BR2_i386
 	default "i686"		if BR2_x86_corei7 && BR2_i386
+	default "i686"		if BR2_x86_westmere && BR2_i386
 	default "i686"		if BR2_x86_corei7_avx && BR2_i386
-	default "i686"		if BR2_x86_corei7_avx2 && BR2_i386
+	default "i686"		if BR2_x86_core_avx2 && BR2_i386
 	default "i686"		if BR2_x86_atom && BR2_i386
 	default "i686"		if BR2_x86_silvermont && BR2_i386
 	default "i686"		if BR2_x86_opteron && BR2_i386
@@ -271,6 +281,7 @@ config BR2_GCC_TARGET_ARCH
 	default "corei7-avx"	if BR2_x86_corei7_avx
 	default "core-avx2"	if BR2_x86_core_avx2
 	default "atom"		if BR2_x86_atom
+	default "westmere"	if BR2_x86_westmere
 	default "silvermont"	if BR2_x86_silvermont
 	default "k8"		if BR2_x86_opteron
 	default "k8-sse3"	if BR2_x86_opteron_sse3

bsp/buildroot/board/pc/grub-efi.cfg

@@ -1,6 +0,0 @@
-set default="0"
-set timeout="5"
-
-menuentry "Buildroot" {
-	linux /bzImage root=/dev/sda2 rootwait console=tty1
-}

bsp/buildroot/board/pc/readme.txt

@@ -57,13 +57,7 @@ qemu-system-x86_64 \
 Emulation in qemu (UEFI)
 ========================
 
-1. Edit grub-efi.cfg
+Run the emulation with:
-
-  Since the driver will show up in the virtual machine as /dev/vda,
-  change board/pc/grub-efi.cfg to use root=/dev/vda2 instead of
-  root=/dev/sda2. Then rebuild grub2 and the image.
-
-2. Run the emulation with:
 
 qemu-system-x86_64 \
 	-M pc \

bsp/buildroot/board/qemu/aarch64-virt/readme.txt

@@ -1,6 +1,6 @@
 Run the emulation with:
 
-  qemu-system-aarch64 -M virt -cpu cortex-a53 -nographic -smp 1 -kernel output/images/Image -append "root=/dev/vda console=ttyAMA0" -netdev user,id=eth0 -device virtio-net-device,netdev=eth0 -drive file=output/images/rootfs.ext4,if=none,format=raw,id=hd0 -device virtio-blk-device,drive=hd0
+  qemu-system-aarch64 -M virt -cpu cortex-a53 -nographic -smp 1 -kernel output/images/Image -append "rootwait root=/dev/vda console=ttyAMA0" -netdev user,id=eth0 -device virtio-net-device,netdev=eth0 -drive file=output/images/rootfs.ext4,if=none,format=raw,id=hd0 -device virtio-blk-device,drive=hd0
 
 The login prompt will appear in the terminal that started Qemu.
 

bsp/buildroot/board/qemu/arm-versatile/readme.txt

@@ -1,6 +1,6 @@
 Run the emulation with:
 
-  qemu-system-arm -M versatilepb -kernel output/images/zImage -dtb output/images/versatile-pb.dtb -drive file=output/images/rootfs.ext2,if=scsi,format=raw -append "root=/dev/sda console=ttyAMA0,115200" -serial stdio -net nic,model=rtl8139 -net user
+  qemu-system-arm -M versatilepb -kernel output/images/zImage -dtb output/images/versatile-pb.dtb -drive file=output/images/rootfs.ext2,if=scsi,format=raw -append "rootwait root=/dev/sda console=ttyAMA0,115200" -serial stdio -net nic,model=rtl8139 -net user
 
 Or for the noMMU emulation:
 

bsp/buildroot/board/qemu/arm-vexpress/readme.txt

@@ -1,6 +1,6 @@
 Run the emulation with:
 
-  qemu-system-arm -M vexpress-a9 -smp 1 -m 256 -kernel output/images/zImage -dtb output/images/vexpress-v2p-ca9.dtb -drive file=output/images/rootfs.ext2,if=sd,format=raw -append "console=ttyAMA0,115200 root=/dev/mmcblk0" -serial stdio -net nic,model=lan9118 -net user
+  qemu-system-arm -M vexpress-a9 -smp 1 -m 256 -kernel output/images/zImage -dtb output/images/vexpress-v2p-ca9.dtb -drive file=output/images/rootfs.ext2,if=sd,format=raw -append "console=ttyAMA0,115200 rootwait root=/dev/mmcblk0" -serial stdio -net nic,model=lan9118 -net user
 
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.

bsp/buildroot/board/qemu/m68k-q800/readme.txt

@@ -1,6 +1,6 @@
 Run the emulation with:
 
- qemu-system-m68k -M q800 -kernel output/images/vmlinux -nographic -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/sda console=ttyS0"
+ qemu-system-m68k -M q800 -kernel output/images/vmlinux -nographic -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/sda console=ttyS0"
 
 The login prompt will appear in the terminal that started Qemu.
 

bsp/buildroot/board/qemu/mips32r2-malta/readme.txt

@@ -1,6 +1,6 @@
 Run the emulation with:
 
- qemu-system-mips -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/hda" -net nic,model=pcnet -net user
+ qemu-system-mips -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -net nic,model=pcnet -net user
 
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer. No keyboard support has been

bsp/buildroot/board/qemu/mips32r2el-malta/readme.txt

@@ -1,6 +1,6 @@
 Run the emulation with:
 
- qemu-system-mipsel -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/hda" -net nic,model=pcnet -net user
+ qemu-system-mipsel -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -net nic,model=pcnet -net user
 
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer. No keyboard support has been

bsp/buildroot/board/qemu/mips32r6-malta/readme.txt

@@ -1,6 +1,6 @@
 Run the emulation with:
 
-qemu-system-mips -M malta -cpu mips32r6-generic -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/hda" -nographic
+qemu-system-mips -M malta -cpu mips32r6-generic -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -nographic
 
 The login prompt will appear in the terminal that started Qemu.
 

bsp/buildroot/board/qemu/mips32r6el-malta/readme.txt

@@ -1,6 +1,6 @@
 Run the emulation with:
 
-qemu-system-mipsel -M malta -cpu mips32r6-generic -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/hda" -net nic,model=pcnet -net user -nographic
+qemu-system-mipsel -M malta -cpu mips32r6-generic -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -net nic,model=pcnet -net user -nographic
 
 The login prompt will appear in the terminal that started Qemu.
 

bsp/buildroot/board/qemu/mips64-malta/readme.txt

@@ -1,6 +1,6 @@
 Run the emulation with:
 
- qemu-system-mips64 -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/hda"
+ qemu-system-mips64 -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda"
 
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.

bsp/buildroot/board/qemu/mips64el-malta/readme.txt

@@ -1,6 +1,6 @@
 Run the emulation with:
 
- qemu-system-mips64el -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/hda"
+ qemu-system-mips64el -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda"
 
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.

bsp/buildroot/board/qemu/mips64r6-malta/readme.txt

@@ -1,6 +1,6 @@
 Run the emulation with:
 
- qemu-system-mips64 -M malta -cpu I6400 -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/hda" -nographic
+ qemu-system-mips64 -M malta -cpu I6400 -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -nographic
 
 The login prompt will appear in the terminal that started Qemu.
 

bsp/buildroot/board/qemu/mips64r6el-malta/readme.txt

@@ -1,6 +1,6 @@
 Run the emulation with:
 
- qemu-system-mips64el -M malta -cpu I6400 -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/hda" -nographic
+ qemu-system-mips64el -M malta -cpu I6400 -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -nographic
 
 The login prompt will appear in the terminal that started Qemu.
 

bsp/buildroot/board/qemu/ppc-g3beige/readme.txt

@@ -1,6 +1,6 @@
 Run the emulation with:
 
-  qemu-system-ppc -M g3beige -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "console=ttyS0 root=/dev/hda" -serial stdio -net nic,model=rtl8139 -net user
+  qemu-system-ppc -M g3beige -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "console=ttyS0 rootwait root=/dev/hda" -serial stdio -net nic,model=rtl8139 -net user
 
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.

bsp/buildroot/board/qemu/ppc64-e5500/readme.txt

@@ -1,6 +1,6 @@
 Run the emulation with:
 
- qemu-system-ppc64 -M ppce500 -cpu e5500 -m 256 -kernel output/images/uImage -drive file=output/images/rootfs.ext2,if=virtio,format=raw -append "console=ttyS0 root=/dev/vda" -serial mon:stdio -nographic
+ qemu-system-ppc64 -M ppce500 -cpu e5500 -m 256 -kernel output/images/uImage -drive file=output/images/rootfs.ext2,if=virtio,format=raw -append "console=ttyS0 rootwait root=/dev/vda" -serial mon:stdio -nographic
 
 The login prompt will appear in the terminal that started Qemu.
 

bsp/buildroot/board/qemu/ppc64-pseries/readme.txt

@@ -1,6 +1,6 @@
 Run the emulation with:
 
- qemu-system-ppc64 -M pseries -cpu POWER7 -m 256 -kernel output/images/vmlinux -append "console=hvc0 root=/dev/sda" -drive file=output/images/rootfs.ext2,if=scsi,index=0,format=raw -serial stdio -display curses
+ qemu-system-ppc64 -M pseries -cpu POWER7 -m 256 -kernel output/images/vmlinux -append "console=hvc0 rootwait root=/dev/sda" -drive file=output/images/rootfs.ext2,if=scsi,index=0,format=raw -serial stdio -display curses
 
 The login prompt will appear in the terminal that started Qemu.
 

bsp/buildroot/board/qemu/ppc64le-pseries/readme.txt

@@ -1,6 +1,6 @@
 Run the emulation with:
 
-qemu-system-ppc64 -M pseries -cpu POWER8 -m 256 -kernel output/images/vmlinux -append "console=hvc0 root=/dev/sda" -drive file=output/images/rootfs.ext2,if=scsi,index=0,format=raw -serial stdio -display curses
+qemu-system-ppc64 -M pseries -cpu POWER8 -m 256 -kernel output/images/vmlinux -append "console=hvc0 rootwait root=/dev/sda" -drive file=output/images/rootfs.ext2,if=scsi,index=0,format=raw -serial stdio -display curses
 
 The login prompt will appear in the terminal window.
 

bsp/buildroot/board/qemu/riscv32-virt/readme.txt

@@ -1,6 +1,6 @@
 Run the emulation with:
 
-  qemu-system-riscv32 -M virt -kernel output/images/bbl -append "root=/dev/vda ro console=ttyS0" -drive file=output/images/rootfs.ext2,format=raw,id=hd0 -device virtio-blk-device,drive=hd0 -netdev user,id=net0 -device virtio-net-device,netdev=net0 -nographic
+  qemu-system-riscv32 -M virt -kernel output/images/bbl -append "rootwait root=/dev/vda ro console=ttyS0" -drive file=output/images/rootfs.ext2,format=raw,id=hd0 -device virtio-blk-device,drive=hd0 -netdev user,id=net0 -device virtio-net-device,netdev=net0 -nographic
 
 The login prompt will appear in the terminal that started Qemu.
 

bsp/buildroot/board/qemu/riscv64-virt/readme.txt

@@ -1,6 +1,6 @@
 Run the emulation with:
 
-  qemu-system-riscv64 -M virt -kernel output/images/bbl -append "root=/dev/vda ro console=ttyS0" -drive file=output/images/rootfs.ext2,format=raw,id=hd0 -device virtio-blk-device,drive=hd0 -netdev user,id=net0 -device virtio-net-device,netdev=net0 -nographic
+  qemu-system-riscv64 -M virt -kernel output/images/bbl -append "rootwait root=/dev/vda ro console=ttyS0" -drive file=output/images/rootfs.ext2,format=raw,id=hd0 -device virtio-blk-device,drive=hd0 -netdev user,id=net0 -device virtio-net-device,netdev=net0 -nographic
 
 The login prompt will appear in the terminal that started Qemu.
 

bsp/buildroot/board/qemu/sh4-r2d/readme.txt

@@ -1,6 +1,6 @@
 Run the emulation with:
 
-  qemu-system-sh4 -M r2d -kernel output/images/zImage -drive file=output/images/rootfs.ext2,if=ide,format=raw -append "root=/dev/sda console=ttySC1,115200 noiotrap" -serial null -serial stdio -net nic,model=rtl8139 -net user
+  qemu-system-sh4 -M r2d -kernel output/images/zImage -drive file=output/images/rootfs.ext2,if=ide,format=raw -append "rootwait root=/dev/sda console=ttySC1,115200 noiotrap" -serial null -serial stdio -net nic,model=rtl8139 -net user
 
 The login prompt will appear in the terminal that started Qemu.
 The graphical window is the framebuffer.

bsp/buildroot/board/qemu/sh4eb-r2d/readme.txt

@@ -1,6 +1,6 @@
 Run the emulation with:
 
-  qemu-system-sh4eb -M r2d -kernel output/images/zImage -drive file=output/images/rootfs.ext2,if=ide,format=raw -append "root=/dev/sda console=ttySC1,115200 noiotrap" -serial null -serial stdio -net nic,model=rtl8139 -net user
+  qemu-system-sh4eb -M r2d -kernel output/images/zImage -drive file=output/images/rootfs.ext2,if=ide,format=raw -append "rootwait root=/dev/sda console=ttySC1,115200 noiotrap" -serial null -serial stdio -net nic,model=rtl8139 -net user
 
 The login prompt will appear in the terminal that started Qemu.
 The graphical window is the framebuffer.

bsp/buildroot/board/qemu/sparc-ss10/readme.txt

@@ -1,6 +1,6 @@
 Run the emulation with:
 
-  qemu-system-sparc -M SS-10 -kernel output/images/zImage -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/sda console=ttyS0,115200" -serial stdio -net nic,model=lance -net user
+  qemu-system-sparc -M SS-10 -kernel output/images/zImage -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/sda console=ttyS0,115200" -serial stdio -net nic,model=lance -net user
 
 The login prompt will appear in the terminal that started Qemu.
 

bsp/buildroot/board/qemu/sparc64-sun4u/readme.txt

@@ -1,6 +1,6 @@
 Run the emulation with:
 
-  qemu-system-sparc64 -M sun4u -kernel output/images/vmlinux -append "root=/dev/sda console=ttyS0,115200" -serial stdio -drive file=output/images/rootfs.ext2,format=raw -net nic,model=e1000 -net user
+  qemu-system-sparc64 -M sun4u -kernel output/images/vmlinux -append "rootwait root=/dev/sda console=ttyS0,115200" -serial stdio -drive file=output/images/rootfs.ext2,format=raw -net nic,model=e1000 -net user
 
 The login prompt will appear in the terminal that started Qemu.
 

bsp/buildroot/board/qemu/x86/readme.txt

@@ -1,6 +1,6 @@
 Run the emulation with:
 
-  qemu-system-i386 -M pc -kernel output/images/bzImage -drive file=output/images/rootfs.ext2,if=virtio,format=raw -append "root=/dev/vda" -net nic,model=virtio -net user
+  qemu-system-i386 -M pc -kernel output/images/bzImage -drive file=output/images/rootfs.ext2,if=virtio,format=raw -append "rootwait root=/dev/vda" -net nic,model=virtio -net user
 
 Optionally add -smp N to emulate a SMP system with N CPUs.
 

bsp/buildroot/board/qemu/x86_64/readme.txt

@@ -1,6 +1,6 @@
 Run the emulation with:
 
-  qemu-system-x86_64 -M pc -kernel output/images/bzImage -drive file=output/images/rootfs.ext2,if=virtio,format=raw -append "root=/dev/vda" -net nic,model=virtio -net user
+  qemu-system-x86_64 -M pc -kernel output/images/bzImage -drive file=output/images/rootfs.ext2,if=virtio,format=raw -append "rootwait root=/dev/vda" -net nic,model=virtio -net user
 
 Optionally add -smp N to emulate a SMP system with N CPUs.
 

bsp/buildroot/boot/arm-trusted-firmware/arm-trusted-firmware.mk

@@ -5,8 +5,6 @@
 ################################################################################
 
 ARM_TRUSTED_FIRMWARE_VERSION = $(call qstrip,$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_VERSION))
-ARM_TRUSTED_FIRMWARE_LICENSE = BSD-3-Clause
-ARM_TRUSTED_FIRMWARE_LICENSE_FILES = license.rst
 
 ifeq ($(ARM_TRUSTED_FIRMWARE_VERSION),custom)
 # Handle custom ATF tarballs as specified by the configuration
@@ -19,6 +17,10 @@ ARM_TRUSTED_FIRMWARE_SITE_METHOD = git
 else
 # Handle stable official ATF versions
 ARM_TRUSTED_FIRMWARE_SITE = $(call github,ARM-software,arm-trusted-firmware,$(ARM_TRUSTED_FIRMWARE_VERSION))
+# The licensing of custom or from-git versions is unknown.
+# This is valid only for the official v1.4.
+ARM_TRUSTED_FIRMWARE_LICENSE = BSD-3-Clause
+ARM_TRUSTED_FIRMWARE_LICENSE_FILES = license.rst
 endif
 
 ifeq ($(BR2_TARGET_ARM_TRUSTED_FIRMWARE)$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_LATEST_VERSION),y)

bsp/buildroot/boot/barebox/barebox.mk

@@ -76,6 +76,10 @@ $(1)_KCONFIG_FRAGMENT_FILES = $$(call qstrip,$$(BR2_TARGET_$(1)_CONFIG_FRAGMENT_
 $(1)_KCONFIG_EDITORS = menuconfig xconfig gconfig nconfig
 $(1)_KCONFIG_OPTS = $$($(1)_MAKE_FLAGS)
 
+$(1)_KCONFIG_DEPENDENCIES = \
+	$(BR2_BISON_HOST_DEPENDENCY) \
+	$(BR2_FLEX_HOST_DEPENDENCY)
+
 ifeq ($$(BR2_TARGET_$(1)_BAREBOXENV),y)
 define $(1)_BUILD_BAREBOXENV_CMDS
 	$$(TARGET_CC) $$(TARGET_CFLAGS) $$(TARGET_LDFLAGS) -o $$(@D)/bareboxenv \

bsp/buildroot/configs/aarch64_efi_defconfig

@@ -13,7 +13,7 @@ BR2_PACKAGE_HOST_GENIMAGE=y
 
 # Bootloader
 BR2_TARGET_GRUB2=y
-BR2_TARGET_GRUB2_AARCH64_EFI=y
+BR2_TARGET_GRUB2_ARM64_EFI=y
 
 # Filesystem / image
 BR2_TARGET_ROOTFS_EXT2=y

bsp/buildroot/configs/beaglebone_defconfig

@@ -2,7 +2,6 @@ BR2_arm=y
 BR2_cortex_a8=y
 BR2_GLOBAL_PATCH_DIR="board/beaglebone/patches"
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y
-BR2_TARGET_GENERIC_GETTY_PORT="ttyO0"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/beaglebone/post-image.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y

bsp/buildroot/configs/qemu_xtensa_lx60_defconfig

@@ -23,3 +23,6 @@ BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux.config"
 BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
 BR2_LINUX_KERNEL_IMAGE_NAME="Image.elf"
 BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="Image"
+
+# Kernel needs mkimage
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y

bsp/buildroot/configs/qemu_xtensa_lx60_nommu_defconfig

@@ -27,3 +27,6 @@ BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-nommu.config"
 BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
 BR2_LINUX_KERNEL_IMAGE_NAME="Image.elf"
 BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="Image"
+
+# Kernel needs mkimage
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y

bsp/buildroot/docs/manual/adding-packages-python.txt

@@ -67,9 +67,13 @@ Python build system, but are not Python modules, can freely choose
 their name (existing examples in Buildroot are +scons+ and
 +supervisor+).
 
-In their +Config.in+ file, they should depend on +BR2_PACKAGE_PYTHON+
+Packages that are only compatible with one version of Python (as in:
-so that when Buildroot will enable Python 3 usage for modules, we will
+Python 2 or Python 3) should depend on that version explicitely in
-be able to enable Python modules progressively on Python 3.
+their +Config.in+ file (+BR2_PACKAGE_PYTHON+ for Python 2,
++BR2_PACKAGE_PYTHON3+ for Python 3).  Packages that are compatible
+with both versions should not explicitely depend on them in their
++Config.in+ file, since that condition is already expressed for the
+whole "External python modules" menu.
 
 The main macro of the Python package infrastructure is
 +python-package+. It is similar to the +generic-package+ macro. It is

bsp/buildroot/docs/manual/common-usage.txt

@@ -310,8 +310,8 @@ installed (+python-matplotlib+ on most distributions), and also the
 +argparse+ module if you're using a Python version older than 2.7
 (+python-argparse+ on most distributions).
 
-Just like for the duration graph, a +BR2_GRAPH_OUT+ environment is
+Just like for the duration graph, a +BR2_GRAPH_OUT+ environment variable
-supported to adjust the output file format. See xref:graph-depends[]
+is supported to adjust the output file format. See xref:graph-depends[]
 for details about this environment variable.
 
 .Note

bsp/buildroot/docs/manual/contribute.txt

@@ -73,7 +73,7 @@ basically two things that can be done:
     In the commit message of a patch fixing an autobuild failure, add a
     reference to the build result directory, as follows:
 ---------------------
-Fixes http://autobuild.buildroot.org/results/51000a9d4656afe9e0ea6f07b9f8ed374c2e4069
+Fixes: http://autobuild.buildroot.org/results/51000a9d4656afe9e0ea6f07b9f8ed374c2e4069
 ---------------------
 
 === Reviewing and testing patches
@@ -402,7 +402,7 @@ the problem is complex, it is OK to add more paragraphs. All paragraphs
 should be wrapped at 72 characters.
 
 A paragraph that explains the root cause of the problem. Again, more
-than on paragraph is OK.
+than one paragraph is OK.
 
 Finally, one or more paragraphs that explain how the problem is solved.
 Don't hesitate to explain complex solutions in detail.

bsp/buildroot/docs/manual/manual.text

@@ -161,13 +161,13 @@ List of Examples
 
 ---------------------------------------------------------------------
 
-Buildroot 2019.02.2 manual generated on 2019-04-29 08:38:35 UTC from
+Buildroot 2019.02.6 manual generated on 2019-10-03 15:16:21 UTC from
-git revision 3b4b3e7cd4
+git revision 4564d8f397
 
 The Buildroot manual is written by the Buildroot developers. It is
 licensed under the GNU General Public License, version 2. Refer to
 the COPYING [http://git.buildroot.org/buildroot/tree/COPYING?id=
-3b4b3e7cd4618e56f5c6a8ea098ffd573a2e868e] file in the Buildroot
+4564d8f3977a6ed448edf9567f4eb6a6b8c127c8] file in the Buildroot
 sources for the full text of this license.
 
 Copyright © 2004-2019 The Buildroot developers
@@ -362,9 +362,8 @@ All of these "make" commands will need to build a configuration
 utility (including the interface), so you may need to install
 "development" packages for relevant libraries used by the
 configuration utilities. Refer to Chapter 2, System requirements for
-more details, specifically the optional requirements Section 2.2,
+more details, specifically the optional requirements to get the
-“Optional packages” to get the dependencies of your favorite
+dependencies of your favorite interface.
-interface.
 
 For each menu entry in the configuration tool, you can find
 associated help that describes the purpose of the entry. Refer to
@@ -1469,10 +1468,10 @@ installed (python-matplotlib on most distributions), and also the
 argparse module if you’re using a Python version older than 2.7
 (python-argparse on most distributions).
 
-Just like for the duration graph, a BR2_GRAPH_OUT environment is
+Just like for the duration graph, a BR2_GRAPH_OUT environment
-supported to adjust the output file format. See Section 8.8,
+variable is supported to adjust the output file format. See
-“Graphing the dependencies between packages” for details about this
+Section 8.8, “Graphing the dependencies between packages” for details
-environment variable.
+about this environment variable.
 
 Note. The collected filesystem size data is only meaningful after a
 complete clean rebuild. Be sure to run make clean all before using
@@ -1738,10 +1737,8 @@ Additionally, there are some other useful make targets:
 |     graph-depends     |Generate a dependency graph of the  |
 |                       |package, in the context of the      |
 |                       |current Buildroot configuration. See|
-|                       |this section Section 8.8, “Graphing |
+|                       |this section for more details about |
-|                       |the dependencies between packages”  |
+|                       |dependency graphs.                  |
-|                       |for more details about dependency   |
-|                       |graphs.                             |
 |-----------------------+------------------------------------|
 |    graph-rdepends     |Generate a graph of this package    |
 |                       |reverse dependencies (i.e the       |
@@ -1793,10 +1790,21 @@ clean.
 Therefore, Buildroot provides a specific mechanism for this use case:
 the <pkg>_OVERRIDE_SRCDIR mechanism. Buildroot reads an override
 file, which allows the user to tell Buildroot the location of the
-source for certain packages. By default this override file is named
+source for certain packages.
-local.mk and located in the top directory of the Buildroot source
+
-tree, but a different location can be specified through the
+The default location of the override file is $(CONFIG_DIR)/local.mk,
-BR2_PACKAGE_OVERRIDE_FILE configuration option.
+as defined by the BR2_PACKAGE_OVERRIDE_FILE configuration option. $
+(CONFIG_DIR) is the location of the Buildroot .config file, so
+local.mk by default lives side-by-side with the .config file, which
+means:
+
+  * In the top-level Buildroot source directory for in-tree builds
+    (i.e., when O= is not used)
+  * In the out-of-tree directory for out-of-tree builds (i.e., when O
+    = is used)
+
+If a different location than these defaults is required, it can be
+specified through the BR2_PACKAGE_OVERRIDE_FILE configuration option.
 
 In this override file, Buildroot expects to find lines of the form:
 
@@ -1853,6 +1861,15 @@ WEBKITGTK_OVERRIDE_SRCDIR_RSYNC_EXCLUSIONS = \
         --exclude WebDriverTests --exclude WebKitBuild --exclude WebKitLibraries \
         --exclude WebKit.xcworkspace --exclude Websites --exclude Examples
 
+By default, Buildroot skips syncing of VCS artifacts (e.g., the .git
+and .svn directories). Some packages prefer to have these VCS
+directories available during build, for example for automatically
+determining a precise commit reference for version information. To
+undo this built-in filtering at a cost of a slower speed, add these
+directories back:
+
+LINUX_OVERRIDE_SRCDIR_RSYNC_EXCLUSIONS = --include .git
+
 Chapter 9. Project-specific customization
 
 Typical actions you may need to perform for a given project are:
@@ -2520,8 +2537,7 @@ from the post-build script.
 Instead, Buildroot provides support for so-called permission tables.
 To use this feature, set config option BR2_ROOTFS_DEVICE_TABLE to a
 space-separated list of permission tables, regular text files
-following the makedev syntax Chapter 23, Makedev syntax documentation
+following the makedev syntax.
-.
 
 If you are using a static device table (i.e. not using devtmpfs,
 mdev, or (e)udev) then you can add device nodes using the same
@@ -2543,8 +2559,7 @@ Sometimes it is needed to add specific users in the target system. To
 cover this requirement, Buildroot provides support for so-called 
 users tables. To use this feature, set config option
 BR2_ROOTFS_USERS_TABLES to a space-separated list of users tables,
-regular text files following the makeusers syntax Chapter 24, 
+regular text files following the makeusers syntax.
-Makeusers syntax documentation.
 
 As shown in Section 9.1, “Recommended directory structure”, the
 recommended location for such files is board/<company>/<boardname>/.
@@ -3653,8 +3668,7 @@ also enabled, but not necessarily built before your package. To do
 so, the dependency also needs to be expressed in the .mk file of the
 package.
 
-Further formatting details: see the coding style Section 15.1,
+Further formatting details: see the coding style.
-“Config.in file”.
 
 17.2.4. Dependencies on target and toolchain options
 
@@ -3838,36 +3852,27 @@ different way, using different infrastructures:
     infrastructure must be used for all packages that do not use the
     autotools as their build system. In the future, other specialized
     infrastructures might be written for other build systems. We
-    cover them through in a tutorial Section 17.5.1, “generic-package
+    cover them through in a tutorial and a reference.
-    tutorial” and a reference Section 17.5.2, “generic-package
-    reference”.
   * Makefiles for autotools-based software (autoconf, automake,
     etc.): We provide a dedicated infrastructure for such packages,
     since autotools is a very common build system. This
     infrastructure must be used for new packages that rely on the
     autotools as their build system. We cover them through a tutorial
-    Section 17.6.1, “autotools-package tutorial” and reference
+    and reference.
-    Section 17.6.2, “autotools-package reference”.
   * Makefiles for cmake-based software: We provide a dedicated
     infrastructure for such packages, as CMake is a more and more
     commonly used build system and has a standardized behaviour. This
     infrastructure must be used for new packages that rely on CMake.
-    We cover them through a tutorial Section 17.7.1, “cmake-package
+    We cover them through a tutorial and reference.
-    tutorial” and reference Section 17.7.2, “cmake-package reference”
-    .
   * Makefiles for Python modules: We have a dedicated infrastructure
     for Python modules that use either the distutils or the
-    setuptools mechanism. We cover them through a tutorial
+    setuptools mechanism. We cover them through a tutorial and a
-    Section 17.8.1, “python-package tutorial” and a reference
+    reference.
-    Section 17.8.2, “python-package reference”.
   * Makefiles for Lua modules: We have a dedicated infrastructure for
     Lua modules available through the LuaRocks web site. We cover
-    them through a tutorial Section 17.9.1, “luarocks-package
+    them through a tutorial and a reference.
-    tutorial” and a reference Section 17.9.2, “luarocks-package
-    reference”.
 
-Further formatting details: see the writing rules Section 15.2, “The
+Further formatting details: see the writing rules.
-.mk file”.
 
 17.4. The .hash file
 
@@ -4209,9 +4214,9 @@ information is (assuming the package name is libfoo) :
     are included in Buildroot itself use a different mechanism: all
     files of the form *.patch present in the package directory inside
     Buildroot will be applied to the package after extraction (see
-    patching a package Chapter 18, Patching a package). Finally,
+    patching a package). Finally, patches listed in the LIBFOO_PATCH
-    patches listed in the LIBFOO_PATCH variable are applied before
+    variable are applied before the patches stored in the Buildroot
-    the patches stored in the Buildroot package directory.
+    package directory.
   * LIBFOO_SITE provides the location of the package, which can be a
     URL or a local filesystem path. HTTP, FTP and SCP are supported
     URL types for retrieving package tarballs. In these cases don’t
@@ -4870,9 +4875,13 @@ be named python-<something> in Buildroot. Other packages that use the
 Python build system, but are not Python modules, can freely choose
 their name (existing examples in Buildroot are scons and supervisor).
 
-In their Config.in file, they should depend on BR2_PACKAGE_PYTHON so
+Packages that are only compatible with one version of Python (as in:
-that when Buildroot will enable Python 3 usage for modules, we will
+Python 2 or Python 3) should depend on that version explicitely in
-be able to enable Python modules progressively on Python 3.
+their Config.in file (BR2_PACKAGE_PYTHON for Python 2,
+BR2_PACKAGE_PYTHON3 for Python 3). Packages that are compatible with
+both versions should not explicitely depend on them in their
+Config.in file, since that condition is already expressed for the
+whole "External python modules" menu.
 
 The main macro of the Python package infrastructure is
 python-package. It is similar to the generic-package macro. It is
@@ -4884,12 +4893,11 @@ by defining a number of variables before calling the python-package
 or host-python-package macros.
 
 All the package metadata information variables that exist in the
-generic package infrastructure Section 17.5.2, “generic-package
+generic package infrastructure also exist in the Python
-reference” also exist in the Python infrastructure:
+infrastructure: PYTHON_FOO_VERSION, PYTHON_FOO_SOURCE,
-PYTHON_FOO_VERSION, PYTHON_FOO_SOURCE, PYTHON_FOO_PATCH,
+PYTHON_FOO_PATCH, PYTHON_FOO_SITE, PYTHON_FOO_SUBDIR,
-PYTHON_FOO_SITE, PYTHON_FOO_SUBDIR, PYTHON_FOO_DEPENDENCIES,
+PYTHON_FOO_DEPENDENCIES, PYTHON_FOO_LICENSE,
-PYTHON_FOO_LICENSE, PYTHON_FOO_LICENSE_FILES,
+PYTHON_FOO_LICENSE_FILES, PYTHON_FOO_INSTALL_STAGING, etc.
-PYTHON_FOO_INSTALL_STAGING, etc.
 
 Note that:
 
@@ -5807,9 +5815,8 @@ The Makefile starts with the definition of the standard variables for
 package declaration (lines 7 to 11).
 
 As seen in line 35, it is based on the generic-package infrastructure
-Section 17.5.1, “generic-package tutorial”. So, it defines the
+. So, it defines the variables required by this particular
-variables required by this particular infrastructure, where Cargo is
+infrastructure, where Cargo is invoked:
-invoked:
 
   * FOO_BUILD_CMDS: Cargo is invoked to perform the build. The
     options required to configure the cross-compilation of the
@@ -5892,10 +5899,10 @@ Just like the generic infrastructure, the Go infrastructure works by
 defining a number of variables before calling the golang-package.
 
 All the package metadata information variables that exist in the
-generic package infrastructure Section 17.5.2, “generic-package
+generic package infrastructure also exist in the Go infrastructure:
-reference” also exist in the Go infrastructure: FOO_VERSION,
+FOO_VERSION, FOO_SOURCE, FOO_PATCH, FOO_SITE, FOO_SUBDIR,
-FOO_SOURCE, FOO_PATCH, FOO_SITE, FOO_SUBDIR, FOO_DEPENDENCIES,
+FOO_DEPENDENCIES, FOO_LICENSE, FOO_LICENSE_FILES,
-FOO_LICENSE, FOO_LICENSE_FILES, FOO_INSTALL_STAGING, etc.
+FOO_INSTALL_STAGING, etc.
 
 Note that it is not necessary to add host-go in the FOO_DEPENDENCIES
 variable of a package, since this basic dependency is automatically
@@ -5984,8 +5991,7 @@ On line 13, we invoke the kernel-module helper infrastructure, that
 generates all the appropriate Makefile rules and variables to build
 that kernel module.
 
-Finally, on line 14, we invoke the generic-package infrastructure
+Finally, on line 14, we invoke the generic-package infrastructure.
-Section 17.5.1, “generic-package tutorial”.
 
 The dependency on linux is automatically added, so it is not needed
 to specify it in FOO_DEPENDENCIES.
@@ -6097,10 +6103,9 @@ there is, as for packages, an infrastructure for rendering documents
 using the AsciiDoc syntax.
 
 Also as for packages, the AsciiDoc infrastructure is available from a
-br2-external tree Section 9.2, “Keeping customizations outside of
+br2-external tree. This allows documentation for a br2-external tree
-Buildroot”. This allows documentation for a br2-external tree to
+to match the Buildroot documentation, as it will be rendered to the
-match the Buildroot documentation, as it will be rendered to the same
+same formats and use the same layout and theme.
-formats and use the same layout and theme.
 
 17.19.1. asciidoc-document tutorial
 
@@ -6271,10 +6276,9 @@ only when the foo tool is selected.
 
 The rest of the Makefile, lines 11-25 defines what should be done at
 the different steps of the Linux tool build process like for a
-generic package Section 17.5.1, “generic-package tutorial”. They will
+generic package. They will actually be used only when the foo tool is
-actually be used only when the foo tool is selected. The only
+selected. The only supported commands are _BUILD_CMDS,
-supported commands are _BUILD_CMDS, _INSTALL_STAGING_CMDS and
+_INSTALL_STAGING_CMDS and _INSTALL_TARGET_CMDS.
-_INSTALL_TARGET_CMDS.
 
 Note. One must not call $(eval $(generic-package)) or any other
 package infrastructure! Linux tools are not packages by themselves,
@@ -6335,8 +6339,7 @@ modify the Linux kernel tree; this is specific to the linux extension
 and can use the variables defined by the foo package, like: $
 (FOO_DIR) or $(FOO_VERSION)… as well as all the Linux variables,
 like: $(LINUX_VERSION) or $(LINUX_VERSION_PROBED), $(KERNEL_ARCH)…
-See the definition of those kernel variables Section 17.18.2,
+See the definition of those kernel variables.
-“kernel-module reference”.
 
 17.21. Hooks available in the various build steps
 
@@ -6926,7 +6929,7 @@ basically two things that can be done:
         patch fixing an autobuild failure, add a reference to the
         build result directory, as follows:
 
-Fixes http://autobuild.buildroot.org/results/51000a9d4656afe9e0ea6f07b9f8ed374c2e4069
+Fixes: http://autobuild.buildroot.org/results/51000a9d4656afe9e0ea6f07b9f8ed374c2e4069
 
 21.3. Reviewing and testing patches
 
@@ -7124,8 +7127,8 @@ options that no longer exist or are no longer needed.
 If you are interested in getting notified of build failures and of
 further changes in the packages you added or modified, please add
 yourself to the DEVELOPERS file. This should be done in the same
-patch creating or modifying the package. See the DEVELOPERS file
+patch creating or modifying the package. See the DEVELOPERS file for
-Chapter 22, DEVELOPERS file and get-developers for more information.
+more information.
 
 Buildroot provides a handy tool to check for common coding style
 mistakes on files you created or modified, called check-package (see
@@ -7233,7 +7236,7 @@ the problem is complex, it is OK to add more paragraphs. All paragraphs
 should be wrapped at 72 characters.
 
 A paragraph that explains the root cause of the problem. Again, more
-than on paragraph is OK.
+than one paragraph is OK.
 
 Finally, one or more paragraphs that explain how the problem is solved.
 Don't hesitate to explain complex solutions in detail.
@@ -7283,14 +7286,12 @@ as superseded.
 21.6. Reporting issues/bugs or getting help
 
 Before reporting any issue, please check in the mailing list archive
-Chapter 5, Community resources whether someone has already reported
+whether someone has already reported and/or fixed a similar problem.
-and/or fixed a similar problem.
 
 However you choose to report bugs or get help, either by opening a
-bug in the bug tracker Chapter 5, Community resources or by sending a
+bug in the bug tracker or by sending a mail to the mailing list,
-mail to the mailing list Chapter 5, Community resources, there are a
+there are a number of details to provide in order to help people
-number of details to provide in order to help people reproduce and
+reproduce and find a solution to the issue.
-find a solution to the issue.
 
 Try to think as if you were trying to help someone else; in that
 case, what would you need?

bsp/buildroot/docs/manual/using-buildroot-development.txt

@@ -28,10 +28,22 @@ clean+.
 Therefore, Buildroot provides a specific mechanism for this use case:
 the +<pkg>_OVERRIDE_SRCDIR+ mechanism. Buildroot reads an _override_
 file, which allows the user to tell Buildroot the location of the
-source for certain packages. By default this _override_ file is named
+source for certain packages.
-+local.mk+ and located in the top directory of the Buildroot source
+
-tree, but a different location can be specified through the
+The default location of the override file is +$(CONFIG_DIR)/local.mk+,
-+BR2_PACKAGE_OVERRIDE_FILE+ configuration option.
+as defined by the +BR2_PACKAGE_OVERRIDE_FILE+ configuration option.
++$(CONFIG_DIR)+ is the location of the Buildroot +.config+ file, so
++local.mk+ by default lives side-by-side with the +.config+ file,
+which means:
+
+* In the top-level Buildroot source directory for in-tree builds
+  (i.e., when +O=+ is not used)
+* In the out-of-tree directory for out-of-tree builds (i.e., when
+  +O=+ is used)
+
+If a different location than these defaults is required, it can be
+specified through the +BR2_PACKAGE_OVERRIDE_FILE+ configuration
+option.
 
 In this _override_ file, Buildroot expects to find lines of the form:
 
@@ -97,3 +109,13 @@ WEBKITGTK_OVERRIDE_SRCDIR_RSYNC_EXCLUSIONS = \
 	--exclude WebDriverTests --exclude WebKitBuild --exclude WebKitLibraries \
 	--exclude WebKit.xcworkspace --exclude Websites --exclude Examples
 ------------------
+
+By default, Buildroot skips syncing of VCS artifacts (e.g., the *.git* and
+*.svn* directories). Some packages prefer to have these VCS directories
+available during build, for example for automatically determining a precise
+commit reference for version information. To undo this built-in filtering at a
+cost of a slower speed, add these directories back:
+
+------------------
+LINUX_OVERRIDE_SRCDIR_RSYNC_EXCLUSIONS = --include .git
+------------------

bsp/buildroot/fs/common.mk

@@ -82,7 +82,7 @@ ROOTFS_$(2)_DEPENDENCIES += rootfs-common
 
 ifeq ($$(BR2_TARGET_ROOTFS_$(2)_GZIP),y)
 ROOTFS_$(2)_COMPRESS_EXT = .gz
-ROOTFS_$(2)_COMPRESS_CMD = gzip -9 -c
+ROOTFS_$(2)_COMPRESS_CMD = gzip -9 -c -n
 endif
 ifeq ($$(BR2_TARGET_ROOTFS_$(2)_BZIP2),y)
 ROOTFS_$(2)_COMPRESS_EXT = .bz2

bsp/buildroot/fs/tar/tar.mk

@@ -8,6 +8,9 @@ TAR_OPTS := $(call qstrip,$(BR2_TARGET_ROOTFS_TAR_OPTIONS))
 
 ROOTFS_TAR_DEPENDENCIES = $(BR2_TAR_HOST_DEPENDENCY)
 
+# do not store atime/ctime in PaxHeaders to ensure reproducbility
+TAR_OPTS += --pax-option=exthdr.name=%d/PaxHeaders/%f,atime:=0,ctime:=0
+
 define ROOTFS_TAR_CMD
 	(cd $(TARGET_DIR); find -print0 | LC_ALL=C sort -z | \
 		tar $(TAR_OPTS) -cf $@ --null --xattrs-include='*' --no-recursion -T - --numeric-owner)

bsp/buildroot/linux/Config.in

@@ -122,7 +122,7 @@ endif
 
 config BR2_LINUX_KERNEL_VERSION
 	string
-	default "4.19.36" if BR2_LINUX_KERNEL_LATEST_VERSION
+	default "4.19.76" if BR2_LINUX_KERNEL_LATEST_VERSION
 	default "v4.4.176-cip31" if BR2_LINUX_KERNEL_LATEST_CIP_VERSION
 	default BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE \
 		if BR2_LINUX_KERNEL_CUSTOM_VERSION

bsp/buildroot/linux/linux.hash

@@ -1,6 +1,6 @@
 # From https://www.kernel.org/pub/linux/kernel/v4.x/sha256sums.asc
 sha256 d011245629b980d4c15febf080b54804aaf215167b514a3577feddb2495f8a3e  linux-4.20.17.tar.xz
-sha256 b808b508177f9d288d94a3b9df7b01d5eac9fcc1804a794c913b2144de63f2bc  linux-4.19.36.tar.xz
+sha256 ba4dd29902734b263a5197410363b17f30dc60bc999bd6ce90b6f5910b971e66  linux-4.19.76.tar.xz
-sha256 b24df2e37faaf2290999c507f9e29de98494f52429bcd35513c5b3e52eaddac2  linux-4.14.113.tar.xz
+sha256 a3c54b887ea3e679382bd4c0536e6a281b071dab2258bd3ee8af75baef2023f5  linux-4.14.146.tar.xz
-sha256 33887b40fc8e0b71f423bb7afe112a4ae190378145f4a3f3892c563b7e43131d  linux-4.9.170.tar.xz
+sha256 d5f4bb7584e461f1faa9a3f94c2ad292246fe692b0e992e072dac255f806c2e3  linux-4.9.194.tar.xz
-sha256 c3598c22b7994b3bebc3059e8ab85bc212c53550eb401baab3f29f8d007a043d  linux-4.4.178.tar.xz
+sha256 d5f4bb7584e461f1faa9a3f94c2ad292246fe692b0e992e072dac255f806c2e3  linux-4.9.194.tar.xz

bsp/buildroot/linux/linux.mk

@@ -64,7 +64,8 @@ LINUX_MAKE_ENV = \
 	BR_BINARIES_DIR=$(BINARIES_DIR)
 
 LINUX_INSTALL_IMAGES = YES
-LINUX_DEPENDENCIES = host-kmod
+LINUX_DEPENDENCIES = host-kmod \
+	$(if $(BR2_PACKAGE_INTEL_MICROCODE),intel-microcode)
 
 # Starting with 4.16, the generated kconfig paser code is no longer
 # shipped with the kernel sources, so we need flex and bison, but
@@ -315,6 +316,8 @@ define LINUX_KCONFIG_FIXUP_CMDS
 	$(LINUX_FIXUP_CONFIG_ENDIANNESS)
 	$(if $(BR2_arm)$(BR2_armeb),
 		$(call KCONFIG_ENABLE_OPT,CONFIG_AEABI,$(@D)/.config))
+	$(if $(BR2_powerpc)$(BR2_powerpc64)$(BR2_powerpc64le),
+		$(call KCONFIG_ENABLE_OPT,CONFIG_PPC_DISABLE_WERROR,$(@D)/.config))
 	$(if $(BR2_TARGET_ROOTFS_CPIO),
 		$(call KCONFIG_ENABLE_OPT,CONFIG_BLK_DEV_INITRD,$(@D)/.config))
 	# As the kernel gets compiled before root filesystems are

bsp/buildroot/package/Config.in

@@ -1042,7 +1042,7 @@ menu "External python modules"
 	source "package/python-slob/Config.in"
 	source "package/python-smbus-cffi/Config.in"
 	source "package/python-socketio/Config.in"
-	source "package/python-sortedcontainers//Config.in"
+	source "package/python-sortedcontainers/Config.in"
 	source "package/python-spidev/Config.in"
 	source "package/python-sqlalchemy/Config.in"
 	source "package/python-subprocess32/Config.in"

bsp/buildroot/package/apache/apache.hash

@@ -1,4 +1,4 @@
-# From http://archive.apache.org/dist/httpd/httpd-2.4.39.tar.bz2.sha256
+# From http://archive.apache.org/dist/httpd/httpd-2.4.41.tar.bz2.sha256
-sha256 b4ca9d05773aa59b54d66cd8f4744b945289f084d3be17d7981d1783a5decfa2 httpd-2.4.39.tar.bz2
+sha256 133d48298fe5315ae9366a0ec66282fa4040efa5d566174481077ade7d18ea40 httpd-2.4.41.tar.bz2
 # Locally computed
 sha256 c49c0819a726b70142621715dae3159c47b0349c2bc9db079070f28dadac0229 LICENSE

bsp/buildroot/package/apache/apache.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-APACHE_VERSION = 2.4.39
+APACHE_VERSION = 2.4.41
 APACHE_SOURCE = httpd-$(APACHE_VERSION).tar.bz2
 APACHE_SITE = http://archive.apache.org/dist/httpd
 APACHE_LICENSE = Apache-2.0

bsp/buildroot/package/assimp/Config.in

@@ -1,9 +1,5 @@
 config BR2_PACKAGE_ASSIMP
 	bool "assimp"
-	# All gcc versions affected by
-	# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71124, that
-	# cause an infinite loop in gcc when building this package.
-	depends on !BR2_microblaze
 	depends on BR2_INSTALL_LIBSTDCPP
 	select BR2_PACKAGE_ZLIB
 	help
@@ -16,5 +12,4 @@ config BR2_PACKAGE_ASSIMP
 	  http://www.assimp.org
 
 comment "assimp needs a toolchain w/ C++"
-	depends on !BR2_microblaze
 	depends on !BR2_INSTALL_LIBSTDCPP

bsp/buildroot/package/assimp/assimp.mk

@@ -19,11 +19,15 @@ endif
 # workaround SuperH compiler failure when static linking (i.e -fPIC is
 # not passed) in gcc versions 5.x or older. The -Os optimization level
 # causes a "unable to find a register to spill in class
-# ‘GENERAL_REGS’" error. -O2 works fine.
+# 'GENERAL_REGS'" error. -O2 works fine.
 ifeq ($(BR2_sh):$(BR2_STATIC_LIBS):$(BR2_TOOLCHAIN_GCC_AT_LEAST_6),y:y:)
 ASSIMP_CXXFLAGS += -O2
 endif
 
+ifeq ($(BR2_TOOLCHAIN_HAS_GCC_BUG_85180),y)
+ASSIMP_CXXFLAGS += -O0
+endif
+
 ASSIMP_CONF_OPTS += -DASSIMP_BUILD_TESTS=OFF \
 	-DCMAKE_CXX_FLAGS="$(TARGET_CXXFLAGS) $(ASSIMP_CXXFLAGS)"
 

bsp/buildroot/package/asterisk/asterisk.hash

@@ -1,5 +1,5 @@
 # Locally computed
-sha256  c022e9d5410ed94ab1aa51ba1e2a8b196f0dfa15bcd0bd545d06efee4c786578  asterisk-16.2.1.tar.gz
+sha256  122ecf242e06da373488024e0c76154f2404d024d09eed20b23cae0795033380  asterisk-16.5.1.tar.gz
 
 # sha1 from: http://downloads.asterisk.org/pub/telephony/sounds/releases
 # sha256 locally computed

bsp/buildroot/package/asterisk/asterisk.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-ASTERISK_VERSION = 16.2.1
+ASTERISK_VERSION = 16.5.1
 # Use the github mirror: it's an official mirror maintained by Digium, and
 # provides tarballs, which the main Asterisk git tree (behind Gerrit) does not.
 ASTERISK_SITE = $(call github,asterisk,asterisk,$(ASTERISK_VERSION))

bsp/buildroot/package/atftp/atftp.hash

@@ -1,2 +1,3 @@
 # Locally computed
-sha1 fc9e9f821dfd2f257b4a5c32b948ed60b4e31fd1 atftp-0.7.1.tar.gz
+sha256 1ad080674e9f974217b3a703e7356c6c8446dc5e7b2014d0d06e1bfaa11b5041  atftp-0.7.2.tar.gz
+sha256 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670  LICENSE

bsp/buildroot/package/atftp/atftp.mk

@@ -4,19 +4,19 @@
 #
 ################################################################################
 
-ATFTP_VERSION = 0.7.1
+ATFTP_VERSION = 0.7.2
 ATFTP_SITE = http://sourceforge.net/projects/atftp/files
 ATFTP_LICENSE = GPL-2.0+
 ATFTP_LICENSE_FILES = LICENSE
+# 0001-Makefile.am-link-against-libpthread-for-atftp.patch patches Makefile.am
+ATFTP_AUTORECONF = YES
 ATFTP_CONF_OPTS = --disable-libwrap --disable-mtftp
 # For static we need to explicitly link against libpthread
 ATFTP_LIBS = -lpthread
-# We use CPPFLAGS for -fgnu89-inline even though it's a compiler flag
+# -fgnu89-inline is needed to avoid multiple definition error with gcc 5. See
-# because atftp discards configure environment CFLAGS. -fgnu89-inline
-# is needed to avoid multiple definition error with gcc 5. See
 # https://gcc.gnu.org/gcc-5/porting_to.html.
 ATFTP_CONF_ENV = LIBS="$(ATFTP_LIBS)" \
-	CPPFLAGS="$(TARGET_CPPFLAGS) -fgnu89-inline"
+	CFLAGS="$(TARGET_CFLAGS) -fgnu89-inline"
 
 ifeq ($(BR2_PACKAGE_READLINE),y)
 ATFTP_DEPENDENCIES += readline

bsp/buildroot/package/atk/atk.mk

@@ -11,6 +11,8 @@ ATK_SITE = http://ftp.gnome.org/pub/gnome/sources/atk/$(ATK_VERSION_MAJOR)
 ATK_LICENSE = LGPL-2.0+
 ATK_LICENSE_FILES = COPYING
 ATK_INSTALL_STAGING = YES
-ATK_DEPENDENCIES = libglib2
+ATK_DEPENDENCIES = libglib2 $(TARGET_NLS_DEPENDENCIES)
+
+ATK_LDFLAGS = $(TARGET_LDFLAGS) $(TARGET_NLS_LIBS)
 
 $(eval $(meson-package))

bsp/buildroot/package/atop/atop.mk

@@ -10,8 +10,15 @@ ATOP_LICENSE = GPL-2.0+
 ATOP_LICENSE_FILES = COPYING
 ATOP_DEPENDENCIES = ncurses zlib
 
+ATOP_CFLAGS = $(TARGET_CFLAGS)
+
+ifeq ($(BR2_TOOLCHAIN_HAS_GCC_BUG_85180),y)
+ATOP_CFLAGS += -O0
+endif
+
 define ATOP_BUILD_CMDS
-	$(MAKE) $(TARGET_CONFIGURE_OPTS) -C $(@D)
+	$(MAKE) $(TARGET_CONFIGURE_OPTS) CFLAGS="$(ATOP_CFLAGS)" \
+		-C $(@D)
 endef
 
 define ATOP_INSTALL_TARGET_CMDS

bsp/buildroot/package/augeas/augeas.mk

@@ -11,9 +11,6 @@ AUGEAS_LICENSE = LGPL-2.1+
 AUGEAS_LICENSE_FILES = COPYING
 AUGEAS_DEPENDENCIES = host-pkgconf readline libxml2
 
-# patching examples/Makefile.am, can be removed when updating from version 1.9.0
-AUGEAS_AUTORECONF = YES
-
 AUGEAS_CONF_OPTS = --disable-gnulib-tests
 
 # Remove the test lenses which occupy about 1.4 MB on the target

bsp/buildroot/package/autofs/autofs.mk

@@ -11,11 +11,18 @@ AUTOFS_LICENSE = GPL-2.0+
 AUTOFS_LICENSE_FILES = COPYING COPYRIGHT
 AUTOFS_DEPENDENCIES = host-flex host-bison host-pkgconf host-nfs-utils
 
-# autofs looks on the build machine for the path of modprobe, so tell
+# autofs looks on the build machine for the path of modprobe, mount,
-# it explicitly where it will be located on the target.
+# umount and fsck programs so tell it explicitly where they will be
+# located on the target.
 AUTOFS_CONF_ENV = \
+	ac_cv_path_E2FSCK=/usr/sbin/fsck.ext2 \
+	ac_cv_path_E3FSCK=/usr/sbin/fsck.ext3 \
+	ac_cv_path_E4FSCK=/usr/sbin/fsck.ext4 \
 	ac_cv_path_KRB5_CONFIG=no \
 	ac_cv_path_MODPROBE=/sbin/modprobe \
+	ac_cv_path_MOUNT=/bin/mount \
+	ac_cv_path_MOUNT_NFS=/usr/sbin/mount.nfs \
+	ac_cv_path_UMOUNT=/bin/umount \
 	ac_cv_linux_procfs=yes
 
 # instead of looking in the PATH like any reasonable package, autofs

bsp/buildroot/package/batctl/batctl.mk

@@ -6,7 +6,7 @@
 
 BATCTL_VERSION = 2017.0
 BATCTL_SITE = http://downloads.open-mesh.org/batman/releases/batman-adv-$(BATCTL_VERSION)
-BATCTL_LICENSE = GPL-2.0
+BATCTL_LICENSE = GPL-2.0, MIT (batman_adv.h, list.h)
 BATCTL_DEPENDENCIES = libnl host-pkgconf
 
 define BATCTL_BUILD_CMDS

bsp/buildroot/package/batman-adv/batman-adv.mk

@@ -6,7 +6,7 @@
 
 BATMAN_ADV_VERSION = 2017.0.1
 BATMAN_ADV_SITE = https://downloads.open-mesh.org/batman/stable/sources/batman-adv
-BATMAN_ADV_LICENSE = GPL-2.0
+BATMAN_ADV_LICENSE = GPL-2.0, MIT (batman_adv.h)
 
 # Bridge Loop Avoidance, Distributed Arp Table are always enabled
 BATMAN_ADV_CFLAGS = \

bsp/buildroot/package/berkeleydb/berkeleydb.mk

@@ -44,6 +44,22 @@ define BERKELEYDB_CONFIGURE_CMDS
 	)
 endef
 
+define HOST_BERKELEYDB_CONFIGURE_CMDS
+	(cd $(@D)/build_unix; rm -rf config.cache; \
+		$(HOST_CONFIGURE_OPTS) \
+		../dist/configure $(QUIET) \
+		--prefix=$(HOST_DIR) \
+		--with-gnu-ld \
+		--disable-cxx \
+		--disable-java \
+		--disable-tcl \
+		--disable-compat185 \
+		--with-pic \
+		--enable-o_direct \
+		--disable-mutexsupport \
+	)
+endef
+
 ifneq ($(BR2_PACKAGE_BERKELEYDB_TOOLS),y)
 
 define BERKELEYDB_REMOVE_TOOLS
@@ -61,3 +77,4 @@ endef
 BERKELEYDB_POST_INSTALL_TARGET_HOOKS += BERKELEYDB_REMOVE_DOCS
 
 $(eval $(autotools-package))
+$(eval $(host-autotools-package))

bsp/buildroot/package/bind/0001-cross.patch

@@ -1,18 +1,23 @@
 Use host compiler to build 'gen' since it's run when building.
 
 Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
+[Fabrice: updated for 9.11.10]
+Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
 
 diff -Nura bind-9.5.1-P1/lib/dns/Makefile.in bind-9.5.1-P1.gencross/lib/dns/Makefile.in
 --- bind-9.5.1-P1/lib/dns/Makefile.in	2007-09-11 22:09:08.000000000 -0300
 +++ bind-9.5.1-P1.gencross/lib/dns/Makefile.in	2009-03-04 16:35:23.000000000 -0200
-@@ -160,8 +160,8 @@
+@@ -160,10 +160,8 @@
- 	./gen -s ${srcdir} > code.h
+ 	./gen -s ${srcdir} > code.h || { rm -f $@ ; exit 1; }
 
  gen: gen.c
 -	${BUILD_CC} ${BUILD_CFLAGS} -I${top_srcdir}/lib/isc/include \
--	${BUILD_CPPFLAGS} ${BUILD_LDFLAGS} -o $@ ${srcdir}/gen.c ${BUILD_LIBS}
+-	${LFS_CFLAGS} ${LFS_LDFLAGS} \
+-	${BUILD_CPPFLAGS} ${BUILD_LDFLAGS} -o $@ ${srcdir}/gen.c \
+-	${BUILD_LIBS} ${LFS_LIBS}
 +	${HOSTCC} ${HOST_CFLAGS} -I${top_srcdir}/lib/isc/include \
 +	${HOST_LDFLAGS} -o $@ ${srcdir}/gen.c
 
- rbtdb64.@O@: rbtdb.c
+ timestamp: include libdns.@A@
+ 	touch timestamp
 

bsp/buildroot/package/bind/0002-Replace-atomic-operations-in-bin-named-client.c-with.patch

@@ -1,133 +0,0 @@
-From ef49780d30d3ddc5735cfc32561b678a634fa72f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ond=C5=99ej=20Sur=C3=BD?= <ondrej@sury.org>
-Date: Wed, 17 Apr 2019 15:22:27 +0200
-Subject: [PATCH] Replace atomic operations in bin/named/client.c with
- isc_refcount reference counting
-
-Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
----
- bin/named/client.c                     | 18 +++++++-----------
- bin/named/include/named/interfacemgr.h |  5 +++--
- bin/named/interfacemgr.c               |  7 +++++--
- 3 files changed, 15 insertions(+), 15 deletions(-)
-
-diff --git a/bin/named/client.c b/bin/named/client.c
-index 845326abc0..29fecadca8 100644
---- a/bin/named/client.c
-+++ b/bin/named/client.c
-@@ -402,12 +402,10 @@ tcpconn_detach(ns_client_t *client) {
- static void
- mark_tcp_active(ns_client_t *client, bool active) {
- 	if (active && !client->tcpactive) {
--		isc_atomic_xadd(&client->interface->ntcpactive, 1);
-+		isc_refcount_increment0(&client->interface->ntcpactive, NULL);
- 		client->tcpactive = active;
- 	} else if (!active && client->tcpactive) {
--		uint32_t old =
--			isc_atomic_xadd(&client->interface->ntcpactive, -1);
--		INSIST(old > 0);
-+		isc_refcount_decrement(&client->interface->ntcpactive, NULL);
- 		client->tcpactive = active;
- 	}
- }
-@@ -554,7 +552,7 @@ exit_check(ns_client_t *client) {
- 		if (client->mortal && TCP_CLIENT(client) &&
- 		    client->newstate != NS_CLIENTSTATE_FREED &&
- 		    !ns_g_clienttest &&
--		    isc_atomic_xadd(&client->interface->ntcpaccepting, 0) == 0)
-+		    isc_refcount_current(&client->interface->ntcpaccepting) == 0)
- 		{
- 			/* Nobody else is accepting */
- 			client->mortal = false;
-@@ -3328,7 +3326,6 @@ client_newconn(isc_task_t *task, isc_event_t *event) {
- 	isc_result_t result;
- 	ns_client_t *client = event->ev_arg;
- 	isc_socket_newconnev_t *nevent = (isc_socket_newconnev_t *)event;
--	uint32_t old;
- 
- 	REQUIRE(event->ev_type == ISC_SOCKEVENT_NEWCONN);
- 	REQUIRE(NS_CLIENT_VALID(client));
-@@ -3348,8 +3345,7 @@ client_newconn(isc_task_t *task, isc_event_t *event) {
- 	INSIST(client->naccepts == 1);
- 	client->naccepts--;
- 
--	old = isc_atomic_xadd(&client->interface->ntcpaccepting, -1);
--	INSIST(old > 0);
-+	isc_refcount_decrement(&client->interface->ntcpaccepting, NULL);
- 
- 	/*
- 	 * We must take ownership of the new socket before the exit
-@@ -3480,8 +3476,8 @@ client_accept(ns_client_t *client) {
- 		 * quota is tcp-clients plus the number of listening
- 		 * interfaces plus 1.)
- 		 */
--		exit = (isc_atomic_xadd(&client->interface->ntcpactive, 0) >
--			(client->tcpactive ? 1 : 0));
-+		exit = (isc_refcount_current(&client->interface->ntcpactive) >
-+			(client->tcpactive ? 1U : 0U));
- 		if (exit) {
- 			client->newstate = NS_CLIENTSTATE_INACTIVE;
- 			(void)exit_check(client);
-@@ -3539,7 +3535,7 @@ client_accept(ns_client_t *client) {
- 	 * listening for connections itself to prevent the interface
- 	 * going dead.
- 	 */
--	isc_atomic_xadd(&client->interface->ntcpaccepting, 1);
-+	isc_refcount_increment0(&client->interface->ntcpaccepting, NULL);
- }
- 
- static void
-diff --git a/bin/named/include/named/interfacemgr.h b/bin/named/include/named/interfacemgr.h
-index 3535ef22a8..6e10f210fd 100644
---- a/bin/named/include/named/interfacemgr.h
-+++ b/bin/named/include/named/interfacemgr.h
-@@ -45,6 +45,7 @@
- #include <isc/magic.h>
- #include <isc/mem.h>
- #include <isc/socket.h>
-+#include <isc/refcount.h>
- 
- #include <dns/result.h>
- 
-@@ -75,11 +76,11 @@ struct ns_interface {
- 						/*%< UDP dispatchers. */
- 	isc_socket_t *		tcpsocket;	/*%< TCP socket. */
- 	isc_dscp_t		dscp;		/*%< "listen-on" DSCP value */
--	int32_t			ntcpaccepting;	/*%< Number of clients
-+	isc_refcount_t		ntcpaccepting;	/*%< Number of clients
- 						     ready to accept new
- 						     TCP connections on this
- 						     interface */
--	int32_t			ntcpactive;	/*%< Number of clients
-+	isc_refcount_t		ntcpactive;	/*%< Number of clients
- 						     servicing TCP queries
- 						     (whether accepting or
- 						     connected) */
-diff --git a/bin/named/interfacemgr.c b/bin/named/interfacemgr.c
-index d9f6df5802..135533be6b 100644
---- a/bin/named/interfacemgr.c
-+++ b/bin/named/interfacemgr.c
-@@ -386,8 +386,8 @@ ns_interface_create(ns_interfacemgr_t *mgr, isc_sockaddr_t *addr,
- 	 * connections will be handled in parallel even though there is
- 	 * only one client initially.
- 	 */
--	ifp->ntcpaccepting = 0;
--	ifp->ntcpactive = 0;
-+	isc_refcount_init(&ifp->ntcpaccepting, 0);
-+	isc_refcount_init(&ifp->ntcpactive, 0);
- 
- 	ifp->nudpdispatch = 0;
- 
-@@ -618,6 +618,9 @@ ns_interface_destroy(ns_interface_t *ifp) {
- 
- 	ns_interfacemgr_detach(&ifp->mgr);
- 
-+	isc_refcount_destroy(&ifp->ntcpactive);
-+	isc_refcount_destroy(&ifp->ntcpaccepting);
-+
- 	ifp->magic = 0;
- 	isc_mem_put(mctx, ifp, sizeof(*ifp));
- }
--- 
-2.11.0
-

bsp/buildroot/package/bind/bind.hash

@@ -1,4 +1,4 @@
-# Verified from https://ftp.isc.org/isc/bind9/9.11.6-P1/bind-9.11.6-P1.tar.gz.asc
+# Verified from https://ftp.isc.org/isc/bind9/9.11.10/bind-9.11.10.tar.gz.asc
 # with key 156890685EA0DF6A1371EF2017CC5DB1F0088407
-sha256 58ace2abb4d048b67abcdef0649ecd6cbd3b0652734a41a1d34f942d5500f8ef bind-9.11.6-P1.tar.gz
+sha256 b2bb840cda20e6771ae8c054007b4ec12e1bb6aa6bfe79102890eb94956a70c3 bind-9.11.10.tar.gz
 sha256 cd02c93b8dcda794f55dfd1231828d69633072a98eee4874f9cf732d22d9dcde COPYRIGHT

bsp/buildroot/package/bind/bind.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-BIND_VERSION = 9.11.6-P1
+BIND_VERSION = 9.11.10
 BIND_SITE = https://ftp.isc.org/isc/bind9/$(BIND_VERSION)
 # bind does not support parallel builds.
 BIND_MAKE = $(MAKE1)

bsp/buildroot/package/botan/0003-makefile.in-move-LDFLAGS-after-EXE_LINKS_TO.patch

@@ -0,0 +1,38 @@
+From a837dd63f3ac5a9c206863c82b57c679cb72b8b7 Mon Sep 17 00:00:00 2001
+From: Fabrice Fontaine <fontaine.fabrice@gmail.com>
+Date: Sun, 28 Apr 2019 10:21:06 +0200
+Subject: [PATCH] makefile.in: move LDFLAGS after EXE_LINKS_TO
+
+Move LDFLAGS after EXE_LINKS_TO to allow the user to give additional
+libraries such as -latomic otherwise static build will fail:
+
+cli/tls_server.o build/obj/cli/tls_utils.o build/obj/cli/utils.o build/obj/cli/x509.o -L. -lbotan-2 -lboost_filesystem -lboost_system -lbz2 -lcrypto -llzma -lsqlite3 -lz -o botan
+/home/buildroot/autobuild/instance-1/output/host/bin/sparc-linux-g++ -Wl,-rpath=\$ORIGIN -pthread -static -latomic build/obj/test/main.o build/obj/test/test_aead.o build/obj/test/test_asn1.o build/obj/test/test_bigint.o build/obj/test/test_block.o build/obj/test/test_blowfish.o build/obj/test/test_c25519.o build/obj/test/test_certstor.o build/obj/test/test_compression.o build/obj/test/test_cryptobox.o build/obj/test/test_datastore.o build/obj/test/test_dh.o build/obj/test/test_dl_group.o build/obj/test/test_dlies.o build/obj/test/test_dsa.o build/obj/test/test_ecc_pointmul.o build/obj/test/test_ecdh.o build/obj/test/test_ecdsa.o build/obj/test/test_ecgdsa.o build/obj/test/test_ecies.o build/obj/test/test_eckcdsa.o build/obj/test/test_ed25519.o build/obj/test/test_elg.o build/obj/test/test_entropy.o build/obj/test/test_ffi.o build/obj/test/test_filters.o build/obj/test/test_fpe.o build/obj/test/test_gf2m.o build/obj/test/test_gost_3410.o build/obj/test/test_hash.o build/obj/test/test_hash_id.o build/obj/test/test_kdf.o build/obj/test/test_keywrap.o build/obj/test/test_mac.o build/obj/test/test_mceliece.o build/obj/test/test_modes.o build/obj/test/test_mp.o build/obj/test/test_name_constraint.o build/obj/test/test_newhope.o build/obj/test/test_ocb.o build/obj/test/test_ocsp.o build/obj/test/test_octetstring.o build/obj/test/test_oid.o build/obj/test/test_os_utils.o build/obj/test/test_otp.o build/obj/test/test_package_transform.o build/obj/test/test_pad.o build/obj/test/test_passhash.o build/obj/test/test_pbkdf.o build/obj/test/test_pem.o build/obj/test/test_pk_pad.o build/obj/test/test_pkcs11.o build/obj/test/test_pkcs11_high_level.o build/obj/test/test_pkcs11_low_level.o build/obj/test/test_psk_db.o build/obj/test/test_pubkey.o build/obj/test/test_rfc6979.o build/obj/test/test_rng.o build/obj/test/test_rng_kat.o build/obj/test/test_rsa.o build/obj/test/test_runner.o build/obj/test/test_simd.o build/obj/test/test_siv.o build/obj/test/test_sm2.o build/obj/test/test_srp6.o build/obj/test/test_stream.o build/obj/test/test_tests.o build/obj/test/test_tls.o build/obj/test/test_tls_messages.o build/obj/test/test_tpm.o build/obj/test/test_tss.o build/obj/test/test_utils.o build/obj/test/test_workfactor.o build/obj/test/test_x509_dn.o build/obj/test/test_x509_path.o build/obj/test/test_xmss.o build/obj/test/tests.o build/obj/test/unit_ecc.o build/obj/test/unit_ecdh.o build/obj/test/unit_ecdsa.o build/obj/test/unit_tls.o build/obj/test/unit_tls_policy.o build/obj/test/unit_x509.o -L. -lbotan-2 -lboost_filesystem -lboost_system -lbz2 -lcrypto -llzma -lsqlite3 -lz -o botan-test
+./libbotan-2.a(utils_filesystem.o): In function `Botan::get_files_recursive(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)':
+filesystem.cpp:(.text+0x758): undefined reference to `__atomic_fetch_sub_4'
+
+Fixes:
+ - http://autobuild.buildroot.org/results/9db39b209a0f4be1e09b7e4ddb5e9a63da4fbbfa
+
+Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
+[Upstream status: https://github.com/randombit/botan/pull/1916]
+---
+ src/build-data/makefile.in | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/build-data/makefile.in b/src/build-data/makefile.in
+index 08c9c5421..7111c7b19 100644
+--- a/src/build-data/makefile.in
++++ b/src/build-data/makefile.in
+@@ -71,7 +71,7 @@ $(CLI): $(LIBRARIES) $(CLIOBJS)
+ 	$(POST_LINK_CMD)
+ 
+ $(TEST): $(LIBRARIES) $(TESTOBJS)
+-	$(EXE_LINK_CMD) $(ABI_FLAGS) $(LDFLAGS) $(TESTOBJS) $(EXE_LINKS_TO) %{output_to_exe}$@
++	$(EXE_LINK_CMD) $(ABI_FLAGS) $(TESTOBJS) $(EXE_LINKS_TO) $(LDFLAGS) %{output_to_exe}$@
+ 	$(POST_LINK_CMD)
+ 
+ %{if build_fuzzers}
+-- 
+2.20.1
+

bsp/buildroot/package/brotli/brotli.mk

@@ -14,4 +14,12 @@ BROTLI_CONF_OPTS = \
 	-DBROTLI_DISABLE_TESTS=ON \
 	-DBROTLI_BUNDLED_MODE=OFF
 
+BROTLI_CFLAGS = $(TARGET_CFLAGS)
+
+ifeq ($(BR2_TOOLCHAIN_HAS_GCC_BUG_68485),y)
+BROTLI_CFLAGS += -O0
+endif
+
+BROTLI_CONF_OPTS += -DCMAKE_C_FLAGS="$(BROTLI_CFLAGS)"
+
 $(eval $(cmake-package))

bsp/buildroot/package/busybox/busybox.config

@@ -967,9 +967,9 @@ CONFIG_UDHCPC_DEFAULT_SCRIPT="/usr/share/udhcpc/default.script"
 # CONFIG_FEATURE_UDHCP_PORT is not set
 CONFIG_UDHCP_DEBUG=0
 CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS=80
-# CONFIG_FEATURE_UDHCP_RFC3397 is not set
+CONFIG_FEATURE_UDHCP_RFC3397=y
 CONFIG_FEATURE_UDHCP_8021Q=y
-CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS="-R -n"
+CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS="-R -n -O search"
 
 #
 # Print Utilities

bsp/buildroot/package/busybox/busybox.mk

@@ -32,6 +32,7 @@ BUSYBOX_DEPENDENCIES = \
 	$(if $(BR2_PACKAGE_DEBIANUTILS),debianutils) \
 	$(if $(BR2_PACKAGE_DIFFUTILS),diffutils) \
 	$(if $(BR2_PACKAGE_DOS2UNIX),dos2unix) \
+	$(if $(BR2_PACKAGE_DOSFSTOOLS),dosfstools) \
 	$(if $(BR2_PACKAGE_E2FSPROGS),e2fsprogs) \
 	$(if $(BR2_PACKAGE_FBSET),fbset) \
 	$(if $(BR2_PACKAGE_GAWK),gawk) \

bsp/buildroot/package/busybox/udhcpc.script

@@ -56,7 +56,7 @@ case "$1" in
 		cat $TMPFILE > $RESOLV_CONF
 		rm -f $TMPFILE
 
-		# prefer rfc3359 domain search list (option 119) if available
+		# prefer rfc3397 domain search list (option 119) if available
 		if [ -n "$search" ]; then
 			search_list=$search
 		elif [ -n "$domain" ]; then

bsp/buildroot/package/bwm-ng/bwm-ng.mk

@@ -7,7 +7,7 @@
 BWM_NG_VERSION = f54b3fad2c80bfe63f920c9b5e7c1d80389c57ef
 BWM_NG_SITE = $(call github,vgropp,bwm-ng,$(BWM_NG_VERSION))
 BWM_NG_CONF_OPTS = --with-procnetdev --with-diskstats
-BWM_NG_LICENSE = GPL-2.0
+BWM_NG_LICENSE = GPL-2.0+
 BWM_NG_LICENSE_FILES = COPYING
 BWM_NG_AUTORECONF = YES
 

bsp/buildroot/package/bzip2/0002-improve-build-system.patch

@@ -70,15 +70,15 @@ Index: b/Makefile-libbz2_so
        huffman.o    \
 @@ -37,8 +36,11 @@
  all: $(OBJS)
- 	$(CC) -shared -Wl,-soname -Wl,libbz2.so.1.0 -o libbz2.so.1.0.6 $(OBJS)
+ 	$(CC) -shared -Wl,-soname -Wl,libbz2.so.1.0 -o libbz2.so.1.0.8 $(OBJS)
- 	$(CC) $(CFLAGS) -o bzip2-shared bzip2.c libbz2.so.1.0.6
+ 	$(CC) $(CFLAGS) -o bzip2-shared bzip2.c libbz2.so.1.0.8
 -	rm -f libbz2.so.1.0
--	ln -s libbz2.so.1.0.6 libbz2.so.1.0
+-	ln -s libbz2.so.1.0.8 libbz2.so.1.0
 +
 +install:
-+	install -m 0755 -D libbz2.so.1.0.6 $(PREFIX)/lib/libbz2.so.1.0.6
++	install -m 0755 -D libbz2.so.1.0.8 $(PREFIX)/lib/libbz2.so.1.0.8
-+	ln -sf libbz2.so.1.0.6 $(PREFIX)/lib/libbz2.so
++	ln -sf libbz2.so.1.0.8 $(PREFIX)/lib/libbz2.so
-+	ln -sf libbz2.so.1.0.6 $(PREFIX)/lib/libbz2.so.1.0
++	ln -sf libbz2.so.1.0.8 $(PREFIX)/lib/libbz2.so.1.0
  
  clean: 
- 	rm -f $(OBJS) bzip2.o libbz2.so.1.0.6 libbz2.so.1.0 bzip2-shared
+ 	rm -f $(OBJS) bzip2.o libbz2.so.1.0.8 libbz2.so.1.0 bzip2-shared

bsp/buildroot/package/bzip2/Config.in

@@ -5,3 +5,5 @@ config BR2_PACKAGE_BZIP2
 	  It typically compresses files to within 10% to 15% of the best
 	  available techniques, while being around twice as fast at
 	  compression and six times faster at decompression.
+
+	  https://sourceware.org/bzip2/

bsp/buildroot/package/bzip2/bzip2.hash

@@ -1,2 +1,4 @@
-# From http://www.bzip.org/downloads.html
+# From https://sourceware.org/pub/bzip2/sha512.sum
-md5	00b516f4704d4a7cb50a1d97e6e8e15b	bzip2-1.0.6.tar.gz
+sha512 083f5e675d73f3233c7930ebe20425a533feedeaaa9d8cc86831312a6581cefbe6ed0d08d2fa89be81082f2a5abdabca8b3c080bf97218a1bd59dc118a30b9f3  bzip2-1.0.8.tar.gz
+# Locally calculated
+sha256 c6dbbf828498be844a89eaa3b84adbab3199e342eb5cb2ed2f0d4ba7ec0f38a3  LICENSE

bsp/buildroot/package/bzip2/bzip2.mk

@@ -4,8 +4,8 @@
 #
 ################################################################################
 
-BZIP2_VERSION = 1.0.6
+BZIP2_VERSION = 1.0.8
-BZIP2_SITE = http://sources.buildroot.net
+BZIP2_SITE = https://sourceware.org/pub/bzip2
 BZIP2_INSTALL_STAGING = YES
 BZIP2_LICENSE = bzip2 license
 BZIP2_LICENSE_FILES = LICENSE

bsp/buildroot/package/ca-certificates/ca-certificates.hash

@@ -1,3 +1,6 @@
 # hashes from: $(CA_CERTIFICATES_SITE)/ca-certificates_$(CA_CERTIFICATES_VERSION).dsc :
-sha1   edf0ec04b02fcbc90cc65906ff83fb042894a3b7                         ca-certificates_20180409.tar.xz
+sha1   47d4584eae85fc905e4994766eb3930a8a84e2e1                         ca-certificates_20190110.tar.xz
-sha256 7af6f5bfc619fd29cbf0258c1d95107c38ce840ad6274e343e1e0d971fc72b51 ca-certificates_20180409.tar.xz
+sha256 ee4bf0f4c6398005f5b5ca4e0b87b82837ac5c3b0280a1cb3a63c47555c3a675 ca-certificates_20190110.tar.xz
+
+# Locally computed
+sha256 80fd11117df5543d5cf17bfd951b0ead213f7867d0b09f09c6d5a5eca3ff7422 debian/copyright

bsp/buildroot/package/ca-certificates/ca-certificates.mk

@@ -4,9 +4,9 @@
 #
 ################################################################################
 
-CA_CERTIFICATES_VERSION = 20180409
+CA_CERTIFICATES_VERSION = 20190110
 CA_CERTIFICATES_SOURCE = ca-certificates_$(CA_CERTIFICATES_VERSION).tar.xz
-CA_CERTIFICATES_SITE = http://snapshot.debian.org/archive/debian/20180411T111033Z/pool/main/c/ca-certificates
+CA_CERTIFICATES_SITE = http://snapshot.debian.org/archive/debian/20190513T145054Z/pool/main/c/ca-certificates
 CA_CERTIFICATES_DEPENDENCIES = host-openssl
 # ca-certificates can be built with either python 2 or python 3
 # but it must be at least python 2.7

bsp/buildroot/package/capnproto/Config.in

@@ -10,7 +10,7 @@ config BR2_PACKAGE_CAPNPROTO
 	  Cap'n Proto is an insanely fast data interchange format
 	  and capability-based RPC system. Think JSON, except
 	  binary. Or think Protocol Buffers, except faster. In
-	  fact, in benchmarks, Cap’n Proto is INFINITY TIMES
+	  fact, in benchmarks, Cap'n Proto is INFINITY TIMES
 	  faster than Protocol Buffers.
 
 	  https://capnproto.org/index.html

bsp/buildroot/package/chocolate-doom/chocolate-doom.mk

@@ -21,6 +21,14 @@ CHOCOLATE_DOOM_CONF_OPTS = \
 	--with-sdl-prefix=$(STAGING_DIR)/usr \
 	--with-sdl-exec-prefix=$(STAGING_DIR)/usr
 
+CHOCOLATE_DOOM_CFLAGS = $(TARGET_CFLAGS)
+
+ifeq ($(BR2_TOOLCHAIN_HAS_GCC_BUG_85180),y)
+CHOCOLATE_DOOM_CFLAGS += -O0
+endif
+
+CHOCOLATE_DOOM_CONF_ENV += CFLAGS="$(CHOCOLATE_DOOM_CFLAGS)"
+
 ifeq ($(BR2_PACKAGE_LIBPNG),y)
 CHOCOLATE_DOOM_DEPENDENCIES += libpng
 CHOCOLATE_DOOM_CONF_OPTS += --with-libpng

bsp/buildroot/package/cjson/cjson.hash

@@ -1,3 +1,3 @@
 # Locally computed:
-sha256 17ace0e31ebd639906983b05fe1d51576b948ca5411c2162f55dd34c122162ca  cjson-v1.7.11.tar.gz
+sha256 760687665ab41a5cff9c40b1053c19572bcdaadef1194e5cba1b5e6f824686e7  cjson-v1.7.12.tar.gz
 sha256 a36dda207c36db5818729c54e7ad4e8b0c6fba847491ba64f372c1a2037b6d5c  LICENSE

bsp/buildroot/package/cjson/cjson.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-CJSON_VERSION = v1.7.11
+CJSON_VERSION = v1.7.12
 CJSON_SITE = $(call github,DaveGamble,cjson,$(CJSON_VERSION))
 CJSON_INSTALL_STAGING = YES
 CJSON_LICENSE = MIT

bsp/buildroot/package/clamav/clamav.hash

@@ -1,5 +1,5 @@
 # Locally calculated
-sha256 0a12ebdf6ff7a74c0bde2bdc2b55cae33449e6dd953ec90824a9e01291277634  clamav-0.101.2.tar.gz
+sha256 0bf094f0919d158a578421d66bc2569c8c8181233ba162bb51722f98c802bccd  clamav-0.101.4.tar.gz
 sha256 0c4fd2fa9733fc9122503797648710851e4ee6d9e4969dd33fcbd8c63cd2f584  COPYING
 sha256 d72a145c90918184a05ef65a04c9e6f7466faa59bc1b82c8f6a8ddc7ddcb9bed  COPYING.bzip2
 sha256 dfb818a0d41411c6fb1c193c68b73018ceadd1994bda41ad541cbff292894bc6  COPYING.file

bsp/buildroot/package/clamav/clamav.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-CLAMAV_VERSION = 0.101.2
+CLAMAV_VERSION = 0.101.4
 CLAMAV_SITE = https://www.clamav.net/downloads/production
 CLAMAV_LICENSE = GPL-2.0
 CLAMAV_LICENSE_FILES = COPYING COPYING.bzip2 COPYING.file COPYING.getopt \

bsp/buildroot/package/cloop/cloop.mk

@@ -13,7 +13,8 @@ CLOOP_LICENSE_FILES = README advancecomp-1.15/COPYING
 HOST_CLOOP_DEPENDENCIES = host-zlib
 
 define HOST_CLOOP_BUILD_CMDS
-	$(HOST_CONFIGURE_OPTS) $(MAKE1) -C $(@D) APPSONLY=yes
+	$(HOST_CONFIGURE_OPTS) $(MAKE1) -C $(@D) APPSONLY=yes \
+		CFLAGS="$(HOST_CFLAGS) -D_GNU_SOURCE"
 endef
 
 define HOST_CLOOP_INSTALL_CMDS

bsp/buildroot/package/collectd/Config.in

@@ -389,7 +389,7 @@ config BR2_PACKAGE_COLLECTD_POSTGRESQL
 	  Connects to and executes SQL statements on a PostgreSQL
 	  database. It then reads back the results and, depending on the
 	  configuration, the returned values are then converted into
-	  collectd “value lists”.
+	  collectd 'value lists'.
 
 comment "postgresql support needs a toolchain w/ wchar"
 	depends on !BR2_USE_WCHAR

bsp/buildroot/package/collectd/collectd.hash

@@ -1,5 +1,5 @@
 # From https://collectd.org/files/SHA256SUM
-sha256	7edd3643c0842215553b2421d5456f4e9a8a58b07e216b40a7e8e91026d8e501	collectd-5.7.1.tar.bz2
+sha256	9d20a0221569a8d6b80bbc52b86e5e84965f5bafdbf5dfc3790e0fed0763e592	collectd-5.7.2.tar.bz2
 
 # Hash for license files
 sha256	ed0409b2b1c30566dab5fcdaf46ee70e140c99788e22f0267645a9357b476ae4	COPYING

bsp/buildroot/package/collectd/collectd.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-COLLECTD_VERSION = 5.7.1
+COLLECTD_VERSION = 5.7.2
 COLLECTD_SITE = http://collectd.org/files
 COLLECTD_SOURCE = collectd-$(COLLECTD_VERSION).tar.bz2
 COLLECTD_CONF_ENV = ac_cv_lib_yajl_yajl_alloc=yes
@@ -15,7 +15,7 @@ COLLECTD_LICENSE_FILES = COPYING libltdl/COPYING.LIB
 # These require unmet dependencies, are fringe, pointless or deprecated
 COLLECTD_PLUGINS_DISABLE = \
 	amqp apple_sensors aquaero ascent barometer dbi dpdkstat email \
-	gmond grpc hddtemp intel_rdt ipmi java libvirt lpar lvm \
+	gmond grpc hddtemp intel_rdt ipmi java lpar lua lvm \
 	madwifi mbmon mic multimeter netapp notify_desktop numa \
 	nut onewire oracle perl pf pinba powerdns python redis routeros \
 	rrdcached sigrok tape target_v5upgrade teamspeak2 ted \

bsp/buildroot/package/connman-gtk/connman-gtk.hash

@@ -1,2 +1,3 @@
 # Locally calculated
 sha256	49bdc4769a7c508b0130e4705eef21aec9df1ea4f5c29fee48a0cae8db828fca	connman-gtk-1.1.1.tar.bz2
+sha256	8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643	COPYING

bsp/buildroot/package/connman-gtk/connman-gtk.mk

@@ -8,8 +8,10 @@ CONNMAN_GTK_VERSION = 1.1.1
 CONNMAN_GTK_SITE = https://github.com/jgke/connman-gtk/releases/download/v$(CONNMAN_GTK_VERSION)
 CONNMAN_GTK_SOURCE = connman-gtk-$(CONNMAN_GTK_VERSION).tar.bz2
 CONNMAN_GTK_INSTALL_STAGING = YES
-CONNMAN_GTK_DEPENDENCIES = host-intltool connman libglib2 libgtk3
+CONNMAN_GTK_DEPENDENCIES = host-intltool connman libglib2 libgtk3 \
+	$(TARGET_NLS_DEPENDENCIES)
 CONNMAN_GTK_LICENSE = GPL-2.0+
 CONNMAN_GTK_LICENSE_FILES = COPYING
+CONNMAN_GTK_CONF_ENV = LIBS=$(TARGET_NLS_LIBS)
 
 $(eval $(autotools-package))

bsp/buildroot/package/coreutils/coreutils.mk

@@ -55,7 +55,7 @@ COREUTILS_CONF_ENV = ac_cv_c_restrict=no \
 	MAKEINFO=true \
 	INSTALL_PROGRAM=$(INSTALL)
 
-COREUTILS_BIN_PROGS = cat chgrp chmod chown cp date dd df dir echo false \
+COREUTILS_BIN_PROGS = base64 cat chgrp chmod chown cp date dd df dir echo false \
 	kill link ln ls mkdir mknod mktemp mv nice printenv pwd rm rmdir \
 	vdir sleep stty sync touch true uname join
 

bsp/buildroot/package/cracklib/cracklib.mk

@@ -9,7 +9,8 @@ CRACKLIB_SITE = https://github.com/cracklib/cracklib/releases/download/cracklib-
 CRACKLIB_LICENSE = LGPL-2.1
 CRACKLIB_LICENSE_FILES = COPYING.LIB
 CRACKLIB_INSTALL_STAGING = YES
-CRACKLIB_DEPENDENCIES = host-cracklib
+CRACKLIB_DEPENDENCIES = host-cracklib $(TARGET_NLS_DEPENDENCIES)
+CRACKLIB_CONF_ENV = LIBS=$(TARGET_NLS_LIBS)
 
 ifeq ($(BR2_PACKAGE_ZLIB),y)
 CRACKLIB_CONF_OPTS += --with-zlib

bsp/buildroot/package/cryptopp/cryptopp.mk

@@ -15,16 +15,23 @@ define HOST_CRYPTOPP_EXTRACT_CMDS
 	$(UNZIP) $(HOST_CRYPTOPP_DL_DIR)/$(CRYPTOPP_SOURCE) -d $(@D)
 endef
 
+HOST_CRYPTOPP_CXXFLAGS = $(HOST_CFLAGS) -fPIC
+
+# _mm256_broadcastsi128_si256 has been added only in gcc 4.9
+ifneq ($(BR2_HOST_GCC_AT_LEAST_4_9),y)
+HOST_CRYPTOPP_CXXFLAGS += -DCRYPTOPP_DISABLE_AVX2
+endif
+
 HOST_CRYPTOPP_MAKE_OPTS = \
 	$(HOST_CONFIGURE_OPTS) \
-	CXXFLAGS="$(HOST_CXXFLAGS) -fPIC"
+	CXXFLAGS="$(HOST_CRYPTOPP_CXXFLAGS)"
 
 define HOST_CRYPTOPP_BUILD_CMDS
 	$(HOST_MAKE_ENV) $(MAKE) -C $(@D) $(HOST_CRYPTOPP_MAKE_OPTS) shared
 endef
 
 define HOST_CRYPTOPP_INSTALL_CMDS
-	$(HOST_MAKE_ENV) $(MAKE) -C $(@D) PREFIX=$(HOST_DIR) install
+	$(HOST_MAKE_ENV) $(MAKE) -C $(@D) PREFIX=$(HOST_DIR) install-lib
 endef
 
 $(eval $(host-generic-package))

bsp/buildroot/package/cups-filters/0001-Replace-relative-linking-with-absolute-linking.patch

@@ -1,46 +0,0 @@
-From c26b4c3550557442890f2f790d4f8b61a3734c1f Mon Sep 17 00:00:00 2001
-From: Olivier Schonken <olivier.schonken@gmail.com>
-Date: Thu, 8 Mar 2018 12:32:23 +0200
-Subject: [PATCH] install: don't use ln -r
-
-Oldish enterprise-class distributions have too old versions of
-coreutils, with ln not supporting -r.
-
-So we fake it.
-
-ln -r would create minimalist relative paths, but they are not
-trivial to generate. Instead, we always create paths relative to the
-root, i.e.:
-
-    ln -s -r /usr/bin/foo /usr/sbin/foo
-
-would create:  /usr/sbin/foo -> ../bin/foo
-while we do :  /usr/sbin/foo -> ../../usr/bin/foo
-
-Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
----
- Makefile.am | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
-diff --git a/Makefile.am b/Makefile.am
-index d959227..b49914a 100644
---- a/Makefile.am
-+++ b/Makefile.am
-@@ -998,11 +998,11 @@ install-exec-hook:
- 	$(INSTALL) -d -m 755 $(DESTDIR)$(pkgfilterdir)
- 	$(INSTALL) -d -m 755 $(DESTDIR)$(pkgbackenddir)
- if ENABLE_FOOMATIC
--	$(LN_S) -r -f $(DESTDIR)$(pkgfilterdir)/foomatic-rip $(DESTDIR)$(bindir)
-+	$(LN_S) -f ../..$(pkgfilterdir)/foomatic-rip $(DESTDIR)$(bindir)
- endif
- if ENABLE_DRIVERLESS
--	$(LN_S) -r -f $(DESTDIR)$(pkgppdgendir)/driverless $(DESTDIR)$(bindir)
--	$(LN_S) -r -f $(DESTDIR)$(pkgppdgendir)/driverless $(DESTDIR)$(pkgbackenddir)
-+	$(LN_S) -f ../..$(pkgppdgendir)/driverless $(DESTDIR)$(bindir)
-+	$(LN_S) -f ../..$(pkgppdgendir)/driverless $(DESTDIR)$(pkgbackenddir)
- endif
- if ENABLE_BRAILLE
- 	$(LN_S) -f imagetobrf $(DESTDIR)$(pkgfilterdir)/imagetoubrl
--- 
-2.14.1
-

bsp/buildroot/package/cups-filters/0001-install-support-old-ln-versions-without-the-r-option.patch

@@ -0,0 +1,214 @@
+From edd44df686b4ec983a327cabc5035106addb274f Mon Sep 17 00:00:00 2001
+From: Carlos Santos <unixmania@gmail.com>
+Date: Mon, 16 Sep 2019 22:22:37 -0300
+Subject: [PATCH] install: support old ln versions without the -r option
+
+Oldish enterprise-class Linux distributions have outdated versions of
+coreutils whose ln command do not support the -r option. Also non-Linux
+systems like FreeBSD don't support that option. Use a shell script that
+mimics the missing functionality.
+
+The script creates minimalist relative paths, like ln -r does, but in
+order to simplify the logic, it requires that the arguments be absolute
+paths and do not end with '/'. This is enough for our purposes.
+
+Add configuration logic to detect if ln supports the -r option, based on
+the logic used by Autoconf to check if ln supports the -s option.
+
+Signed-off-by: Carlos Santos <unixmania@gmail.com>
+---
+ Makefile.am     |  6 ++--
+ configure.ac    |  2 ++
+ ln-srf          | 49 ++++++++++++++++++++++++++
+ m4/ac_ln_srf.m4 | 91 +++++++++++++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 145 insertions(+), 3 deletions(-)
+ create mode 100755 ln-srf
+ create mode 100644 m4/ac_ln_srf.m4
+
+diff --git a/Makefile.am b/Makefile.am
+index 76b81de5..beb2882e 100644
+--- a/Makefile.am
++++ b/Makefile.am
+@@ -988,11 +988,11 @@ install-exec-hook:
+ 	$(INSTALL) -d -m 755 $(DESTDIR)$(pkgfilterdir)
+ 	$(INSTALL) -d -m 755 $(DESTDIR)$(pkgbackenddir)
+ if ENABLE_FOOMATIC
+-	$(LN_S) -r -f $(DESTDIR)$(pkgfilterdir)/foomatic-rip $(DESTDIR)$(bindir)
++	$(LN_SRF) $(DESTDIR)$(pkgfilterdir)/foomatic-rip $(DESTDIR)$(bindir)
+ endif
+ if ENABLE_DRIVERLESS
+-	$(LN_S) -r -f $(DESTDIR)$(pkgppdgendir)/driverless $(DESTDIR)$(bindir)
+-	$(LN_S) -r -f $(DESTDIR)$(pkgppdgendir)/driverless $(DESTDIR)$(pkgbackenddir)
++	$(LN_SRF) $(DESTDIR)$(pkgppdgendir)/driverless $(DESTDIR)$(bindir)
++	$(LN_SRF) $(DESTDIR)$(pkgppdgendir)/driverless $(DESTDIR)$(pkgbackenddir)
+ endif
+ if ENABLE_BRAILLE
+ 	$(LN_S) -f imagetobrf $(DESTDIR)$(pkgfilterdir)/imagetoubrl
+diff --git a/configure.ac b/configure.ac
+index d5a539b6..fbcf829a 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -58,6 +58,8 @@ AM_ICONV
+ AC_PROG_CPP
+ AC_PROG_INSTALL
+ AC_PROG_LN_S
++AS_LN_SRF_PREPARE
++AC_PROG_LN_SRF
+ AC_PROG_MAKE_SET
+ AC_PROG_LIBTOOL
+ PKG_PROG_PKG_CONFIG([0.20])
+diff --git a/ln-srf b/ln-srf
+new file mode 100755
+index 00000000..f395a760
+--- /dev/null
++++ b/ln-srf
+@@ -0,0 +1,49 @@
++#!/bin/sh
++#
++# Author: Carlos Santos <unixmania@gmail.com>
++# This file is in public domain.
++#
++
++error() {
++	echo "$@" 1>&2
++	exit 1
++}
++
++src="$1"
++dst="$2"
++
++check_path() {
++	case "$2" in
++		*/../*|*/./*|*/.|*/..) error "$1 path '$2' must be absolute";;
++		*/) error "$1 path '$2' must not end with '/'";;
++		/?*) ;;
++		*) error "$1 path '$2' must start with '/'";;
++	esac
++}
++
++check_path "source" "$src"
++check_path "destination" "$dst"
++
++# strip leading '/'
++src=${src#/*}
++tmp=${dst#/*}
++
++s_prefix=${src%%/*}
++d_prefix=${tmp%%/*}
++
++# strip leading common
++while [ "$s_prefix" = "$d_prefix" ]; do
++	src="${src#$s_prefix/}"
++	tmp="${tmp#$d_prefix/}"
++	s_prefix=${src%%/*}
++	d_prefix=${tmp%%/*}
++done
++
++s_prefix="../"
++while [ -n "$d_prefix" ] && [ "$tmp" != "$d_prefix" ]; do
++	s_prefix="../$s_prefix"
++	tmp="${tmp#$d_prefix/}"
++	d_prefix=${tmp%%/*}
++done
++
++ln -s -f "$s_prefix$src" "$dst"
+diff --git a/m4/ac_ln_srf.m4 b/m4/ac_ln_srf.m4
+new file mode 100644
+index 00000000..204b3439
+--- /dev/null
++++ b/m4/ac_ln_srf.m4
+@@ -0,0 +1,91 @@
++# Adapted from Autoconf Version 2.63 (GPLv2).
++#
++# Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
++# Free Software Foundation, Inc.
++#
++# This program is free software: you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
++# 02110-1301, USA.
++#
++# As a special exception, the Free Software Foundation gives unlimited
++# permission to copy, distribute and modify the configure scripts that
++# are the output of Autoconf.  You need not follow the terms of the GNU
++# General Public License when using or distributing such scripts, even
++# though portions of the text of Autoconf appear in them.  The GNU
++# General Public License (GPL) does govern all other use of the material
++# that constitutes the Autoconf program.
++#
++# Certain portions of the Autoconf source text are designed to be copied
++# (in certain cases, depending on the input) into the output of
++# Autoconf.  We call these the "data" portions.  The rest of the Autoconf
++# source text consists of comments plus executable code that decides which
++# of the data portions to output in any given case.  We call these
++# comments and executable code the "non-data" portions.  Autoconf never
++# copies any of the non-data portions into its output.
++#
++# This special exception to the GPL applies to versions of Autoconf
++# released by the Free Software Foundation.  When you make and
++# distribute a modified version of Autoconf, you may extend this special
++# exception to the GPL to apply to your modified version as well, *unless*
++# your modified version has the potential to copy into its output some
++# of the text that was the non-data portion of the version that you started
++# with.  (In other words, unless your change moves or copies text from
++# the non-data portions to the data portions.)  If your modification has
++# such potential, you must delete any notice of this special exception
++# to the GPL from your modified version.
++
++# AS_LN_SRF_PREPARE
++# ------------------------------------
++m4_defun([AS_LN_SRF_PREPARE],
++[rm -f conf$$ conf$$.exe conf$$.file
++if test -d conf$$.dir; then
++  rm -f conf$$.dir/conf$$.file
++else
++  rm -f conf$$.dir
++  mkdir conf$$.dir 2>/dev/null
++fi
++if (echo >conf$$.file) 2>/dev/null; then
++  if ln -s -r conf$$.file conf$$ 2>/dev/null; then
++    as_ln_srf='ln -s -r -f'
++  elif ln -s conf$$.file conf$$ 2>/dev/null; then
++    as_ln_srf='./ln-srf'
++    # ... but there are two gotchas:
++    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
++    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
++    # In both cases, we have to default to `cp -pRf'.
++    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
++      as_ln_srf='cp -pRf'
++  elif ln conf$$.file conf$$ 2>/dev/null; then
++    as_ln_srf=ln
++  else
++    as_ln_srf='cp -pRf'
++  fi
++else
++  as_ln_srf='cp -pRf'
++fi
++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
++rmdir conf$$.dir 2>/dev/null
++])# AS_LN_SRF_PREPARE
++
++# AC_PROG_LN_SRF
++# --------------------------------
++AC_DEFUN([AC_PROG_LN_SRF],
++[AC_MSG_CHECKING([whether ln -s -r -f works])
++AC_SUBST([LN_SRF], [$as_ln_srf])dnl
++if test "$LN_SRF" = "ln -s -r -f"; then
++  AC_MSG_RESULT([yes])
++else
++  AC_MSG_RESULT([no, using $LN_SRF])
++fi
++])# AC_PROG_LN_SRF
+-- 
+2.18.1
+

bsp/buildroot/package/cups-filters/0002-filter-texttotext.c-link-with-libiconv-if-needed.patch

@@ -0,0 +1,122 @@
+From 734ef160b428c545d8c6ae16c4bfe3c036173aa4 Mon Sep 17 00:00:00 2001
+From: Carlos Santos <unixmania@gmail.com>
+Date: Sun, 21 Jul 2019 23:54:29 -0300
+Subject: [PATCH] filter/texttotext.c: link with libiconv if needed
+
+texttotext.c uses iconv so it should link with libiconv on platforms
+where it is a separate library (e.g. uClibc-ng without built-in NLS)
+otherwise texttotext fails to link:
+
+  CCLD     texttotext
+[...]/ld: texttotext-texttotext.o: in function `main':
+texttotext.c:(.text.startup+0xde0): undefined reference to `libiconv_open'
+[...]/ld: texttotext.c:(.text.startup+0xf9d): undefined reference to `libiconv'
+[...]/ld: texttotext.c:(.text.startup+0xfd6): undefined reference to `libiconv'
+[...]/ld: texttotext.c:(.text.startup+0x16c3): undefined reference to `libiconv_close'
+
+Modify autogen.sh to call autopoint, which adds the libiconv discovery.
+It also creates a "po" skeleton but we can discard it, since it is not
+really necessary.
+
+Fixes: https://bugs.busybox.net/show_bug.cgi?id=12031
+
+Signed-off-by: Carlos Santos <unixmania@gmail.com>
+---
+ Makefile.am  |  4 +++-
+ autogen.sh   | 17 +++++++++++++++++
+ configure.ac |  6 +++++-
+ 3 files changed, 25 insertions(+), 2 deletions(-)
+
+diff --git a/Makefile.am b/Makefile.am
+index 72e023ed..76b81de5 100644
+--- a/Makefile.am
++++ b/Makefile.am
+@@ -778,7 +778,7 @@ texttotext_SOURCES = \
+ 	filter/texttotext.c
+ EXTRA_texttotext_SOURCES = filter/strcasestr.c
+ texttotext_CFLAGS = $(CUPS_CFLAGS)
+-texttotext_LDADD = $(STRCASESTR) $(CUPS_LIBS)
++texttotext_LDADD = $(STRCASESTR) $(CUPS_LIBS) $(LIBICONV)
+ texttotext_DEPENDENCIES = $(STRCASESTR)
+ 
+ pdftops_SOURCES = \
+@@ -1049,3 +1049,5 @@ if ENABLE_BRAILLE
+ 	$(RM) $(DESTDIR)$(pkgfilterdir)/vectortoubrl
+ 	$(RM) $(DESTDIR)$(pkgfilterdir)/textbrftoindexv4
+ endif
++
++SUBDIRS =
+diff --git a/autogen.sh b/autogen.sh
+index 5462a323..cd7397a9 100755
+--- a/autogen.sh
++++ b/autogen.sh
+@@ -13,11 +13,22 @@ aclocal --version > /dev/null 2> /dev/null || {
+     echo "error: aclocal not found"
+     exit 1
+ }
++
+ automake --version > /dev/null 2> /dev/null || {
+     echo "error: automake not found"
+     exit 1
+ }
+ 
++autopoint --version > /dev/null 2> /dev/null || {
++    echo "error: autopoint not found"
++    exit 1
++}
++
++gettext --version > /dev/null 2> /dev/null || {
++    echo "error: gettext not found"
++    exit 1
++}
++
+ for i in $TESTLIBTOOLIZE; do
+ 	if which $i > /dev/null 2>&1; then
+ 		LIBTOOLIZE=$i
+@@ -39,6 +50,12 @@ fi
+ 
+ rm -rf autom4te*.cache
+ 
++autopoint --force || {
++    echo "error: autopoint failed"
++    exit 1
++}
++# autopoint is for libiconv discovery; we don't want the po directory
++rm -rf po
+ $LIBTOOLIZE --force --copy || {
+     echo "error: libtoolize failed"
+     exit 1
+diff --git a/configure.ac b/configure.ac
+index 607dc17a..d5a539b6 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -18,7 +18,7 @@ AC_CONFIG_MACRO_DIR([m4])
+ m4_include([m4/ac_define_dir.m4])
+ m4_include([m4/ax_compare_version.m4])
+ m4_include([m4/basic-directories.m4])
+-AM_INIT_AUTOMAKE([1.11 gnu dist-xz dist-bzip2])
++AM_INIT_AUTOMAKE([1.11 gnu dist-xz dist-bzip2 subdir-objects])
+ AM_SILENT_RULES([yes])
+ AC_LANG([C++])
+ AC_CONFIG_HEADERS([config.h])
+@@ -54,6 +54,7 @@ AC_PROG_CC
+ AC_PROG_CXX
+ AX_CXX_COMPILE_STDCXX([11],[noext],[mandatory])
+ AM_PROG_CC_C_O
++AM_ICONV
+ AC_PROG_CPP
+ AC_PROG_INSTALL
+ AC_PROG_LN_S
+@@ -61,6 +62,9 @@ AC_PROG_MAKE_SET
+ AC_PROG_LIBTOOL
+ PKG_PROG_PKG_CONFIG([0.20])
+ 
++AM_GNU_GETTEXT_VERSION([0.18.3])
++AM_GNU_GETTEXT([external])
++
+ # ========================================
+ # Specify the fontdir patch if not default
+ # ========================================
+-- 
+2.18.1
+

bsp/buildroot/package/cups-filters/cups-filters.mk

@@ -8,7 +8,7 @@ CUPS_FILTERS_VERSION = 1.21.3
 CUPS_FILTERS_SITE = http://openprinting.org/download/cups-filters
 CUPS_FILTERS_LICENSE = GPL-2.0, GPL-2.0+, GPL-3.0, GPL-3.0+, LGPL-2, LGPL-2.1+, MIT, BSD-4-Clause
 CUPS_FILTERS_LICENSE_FILES = COPYING
-# 0001-Replace-relative-linking-with-absolute-linking.patch
+# 0001-install-support-old-ln-versions-without-the-r-option.patch
 CUPS_FILTERS_AUTORECONF = YES
 
 CUPS_FILTERS_DEPENDENCIES = cups libglib2 lcms2 qpdf fontconfig freetype jpeg
@@ -16,11 +16,20 @@ CUPS_FILTERS_DEPENDENCIES = cups libglib2 lcms2 qpdf fontconfig freetype jpeg
 CUPS_FILTERS_CONF_OPTS = --disable-imagefilters \
 	--disable-mutool \
 	--disable-foomatic \
+	--disable-braille \
 	--with-cups-config=$(STAGING_DIR)/usr/bin/cups-config \
 	--with-sysroot=$(STAGING_DIR) \
 	--with-pdftops=pdftops \
 	--with-jpeg
 
+# After 0002-filter-texttotext.c-link-with-libiconv-if-needed.patch autoreconf
+# needs config.rpath and ABOUT-NLS, which are not in v1.25.4 yet. Fake them.
+define CUPS_FILTERS_ADD_MISSING_FILE
+	touch $(@D)/config.rpath $(@D)/ABOUT-NLS
+endef
+
+CUPS_FILTERS_PRE_CONFIGURE_HOOKS = CUPS_FILTERS_ADD_MISSING_FILE
+
 ifeq ($(BR2_PACKAGE_LIBPNG),y)
 CUPS_FILTERS_CONF_OPTS += --with-png
 CUPS_FILTERS_DEPENDENCIES += libpng