rename target from pi3 to rpi3

projects/rpi3_domo/uboot/uEnv.txt

@@ -0,0 +1,33 @@
+arch=arm
+baudrate=115200
+board=rpi
+board_name=Model B+
+board_rev=0x10
+board_rev_scheme=0
+board_revision=0x10
+stderr=serial
+stdin=serial
+stdout=serial
+boot_prefixes=/ /boot/
+boot_scripts=boot.scr boot.scr.uimg
+boot_targets=fel mmc0 mmc1
+bootcmd=run distro_bootcmd
+distro_bootcmd=for target in ${boot_targets}; do run bootcmd_${target}; done
+bootcmd_fel=if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then echo '(FEL boot)'; source ${fel_scriptaddr}; fi
+bootcmd_mmc0=setenv devnum 0; run mmc_boot
+bootcmd_mmc1=setenv devnum 1; run mmc_boot
+mmc_boot=if mmc dev ${devnum}; then setenv devtype mmc; run scan_dev_for_boot_part; fi
+scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then run scan_dev_for_boot; fi; done
+scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_scripts; done;
+scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done
+boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr}
+console=ttyS0,115200
+scriptaddr=0x43100000
+fdt_addr_r=0x43000000
+kernel_addr_r=0x42000000
+ramdisk_addr_r=0x43300000
+dev=run dev_boot
+dev_boot=mmc dev 0; fatload mmc 0:1 ${scriptaddr} dev.scr; source ${scriptaddr}
+update=run update_scr
+update_scr=mmc dev 0; fatload mmc 0:1 ${scriptaddr} update.scr; source ${scriptaddr}
+is_configured=0