rpi/domo
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

boot on serial console.

Browse Source 
TG-11 #closed.
This commit is contained in:
jbnadal
2017-04-10 18:36:35 +02:00
parent 9e2c90e94d
commit e37d08db04
14 changed files with 42 additions and 560 deletions
Download Patch File Download Diff File Expand all files Collapse all files

BIN
projects/rpi_domo/dts/bcm2708-rpi-b-plus.dtb
View File

Binary file not shown.

523
projects/rpi_domo/dts/bcm2708-rpi-b-plus.dti
View File

@@ -1,523 +0,0 @@
/ {
#address-cells = <0x00000001>;
#size-cells = <0x00000001>;
interrupt-parent = <0x00000001>;
compatible = "brcm,bcm2708";
model = "Raspberry Pi Model B+";
chosen {
bootargs = [00];
};
aliases {
audio = "/soc/audio";
aux = "/soc/aux@0x7e215004";
sound = "/soc/sound";
soc = "/soc";
dma = "/soc/dma@7e007000";
intc = "/soc/interrupt-controller@7e00b200";
watchdog = "/soc/watchdog@7e100000";
random = "/soc/rng@7e104000";
mailbox = "/soc/mailbox@7e00b800";
gpio = "/soc/gpio@7e200000";
uart0 = "/soc/uart@7e201000";
sdhost = "/soc/sdhost@7e202000";
i2s = "/soc/i2s@7e203000";
spi0 = "/soc/spi@7e204000";
i2c0 = "/soc/i2c@7e205000";
uart1 = "/soc/uart@7e215040";
spi1 = "/soc/spi@7e215080";
spi2 = "/soc/spi@7e2150C0";
mmc = "/soc/mmc@7e300000";
i2c1 = "/soc/i2c@7e804000";
i2c2 = "/soc/i2c@7e805000";
usb = "/soc/usb@7e980000";
leds = "/soc/leds";
fb = "/soc/fb";
vchiq = "/soc/vchiq";
thermal = "/soc/thermal";
clocks = "/clocks";
};
memory {
device_type = "memory";
reg = <0x00000000 0x00000000>;
};
soc {
compatible = "simple-bus";
#address-cells = <0x00000001>;
#size-cells = <0x00000001>;
ranges = <0x7e000000 0x20000000 0x01000000>;
phandle = <0x00000022>;
dma@7e007000 {
compatible = "brcm,bcm2835-dma";
reg = <0x7e007000 0x00000f00>;
interrupts = <0x00000001 0x00000010 0x00000001 0x00000011 0x00000001 0x00000012 0x00000001 0x00000013 0x00000001 0x00000014 0x00000001 0x00000015 0x00000001 0x00000016 0x00000001 0x00000017 0x00000001 0x00000018 0x00000001 0x00000019 0x00000001 0x0000001a 0x00000001 0x0000001b>;
#dma-cells = <0x00000001>;
brcm,dma-channel-mask = <0x00000f35>;
phandle = <0x00000006>;
};
interrupt-controller@7e00b200 {
compatible = "brcm,bcm2835-armctrl-ic";
reg = <0x7e00b200 0x00000200>;
interrupt-controller;
#interrupt-cells = <0x00000002>;
phandle = <0x00000001>;
};
mailbox@7e00b800 {
compatible = "brcm,bcm2835-mbox";
reg = <0x7e00b880 0x00000040>;
interrupts = <0x00000000 0x00000001>;
#mbox-cells = <0x00000000>;
phandle = <0x00000012>;
};
watchdog@7e100000 {
compatible = "brcm,bcm2835-pm-wdt";
reg = <0x7e100000 0x00000028>;
status = "okay";
phandle = <0x0000001f>;
};
cprman@7e101000 {
compatible = "brcm,bcm2835-cprman";
#clock-cells = <0x00000001>;
reg = <0x7e101000 0x00002000>;
clocks = <0x00000002>;
status = "disabled";
phandle = <0x00000023>;
};
rng@7e104000 {
compatible = "brcm,bcm2835-rng";
reg = <0x7e104000 0x00000010>;
status = "okay";
phandle = <0x00000020>;
};
gpio@7e200000 {
compatible = "brcm,bcm2835-gpio";
reg = <0x7e200000 0x000000b4>;
interrupts = <0x00000002 0x00000011 0x00000002 0x00000012>;
gpio-controller;
#gpio-cells = <0x00000002>;
interrupt-controller;
#interrupt-cells = <0x00000002>;
phandle = <0x00000009>;
sdhost_pins {
brcm,pins = <0x00000030 0x00000031 0x00000032 0x00000033 0x00000034 0x00000035>;
brcm,function = <0x00000004>;
phandle = <0x00000007>;
};
spi0_pins {
brcm,pins = <0x00000009 0x0000000a 0x0000000b>;
brcm,function = <0x00000004>;
phandle = <0x0000000a>;
};
spi0_cs_pins {
brcm,pins = <0x00000008 0x00000007>;
brcm,function = <0x00000001>;
phandle = <0x0000000b>;
};
i2c0 {
brcm,pins = <0x00000000 0x00000001>;
brcm,function = <0x00000004>;
phandle = <0x0000000c>;
};
i2c1 {
brcm,pins = <0x00000002 0x00000003>;
brcm,function = <0x00000004>;
phandle = <0x00000011>;
};
i2s {
brcm,pins = <0x00000012 0x00000013 0x00000014 0x00000015>;
brcm,function = <0x00000004>;
phandle = <0x00000008>;
};
};
uart@7e201000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x7e201000 0x00001000>;
interrupts = <0x00000002 0x00000019>;
clocks = <0x00000003 0x00000004>;
clock-names = "uartclk", "apb_pclk";
arm,primecell-periphid = <0x00241011>;
status = "okay";
phandle = <0x00000015>;
};
sdhost@7e202000 {
compatible = "brcm,bcm2835-sdhost";
reg = <0x7e202000 0x00000100>;
interrupts = <0x00000002 0x00000018>;
clocks = <0x00000005>;
dmas = <0x00000006 0x0000000d>;
dma-names = "rx-tx";
brcm,overclock-50 = <0x00000000>;
brcm,pio-limit = <0x00000001>;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <0x00000007>;
bus-width = <0x00000004>;
phandle = <0x00000021>;
};
i2s@7e203000 {
compatible = "brcm,bcm2835-i2s";
reg = <0x7e203000 0x00000024 0x7e101098 0x00000008>;
dmas = <0x00000006 0x00000002 0x00000006 0x00000003>;
dma-names = "tx", "rx";
status = "disabled";
#sound-dai-cells = <0x00000000>;
pinctrl-names = "default";
pinctrl-0 = <0x00000008>;
phandle = <0x00000017>;
};
spi@7e204000 {
compatible = "brcm,bcm2835-spi";
reg = <0x7e204000 0x00001000>;
interrupts = <0x00000002 0x00000016>;
clocks = <0x00000005>;
#address-cells = <0x00000001>;
#size-cells = <0x00000000>;
status = "disabled";
dmas = <0x00000006 0x00000006 0x00000006 0x00000007>;
dma-names = "tx", "rx";
cs-gpios = <0x00000009 0x00000008 0x00000001 0x00000009 0x00000007 0x00000001>;
pinctrl-names = "default";
pinctrl-0 = <0x0000000a 0x0000000b>;
phandle = <0x00000018>;
spidev@0 {
compatible = "spidev";
reg = <0x00000000>;
#address-cells = <0x00000001>;
#size-cells = <0x00000000>;
spi-max-frequency = <0x0007a120>;
phandle = <0x00000024>;
};
spidev@1 {
compatible = "spidev";
reg = <0x00000001>;
#address-cells = <0x00000001>;
#size-cells = <0x00000000>;
spi-max-frequency = <0x0007a120>;
phandle = <0x00000025>;
};
};
i2c@7e205000 {
compatible = "brcm,bcm2708-i2c";
reg = <0x7e205000 0x00001000>;
interrupts = <0x00000002 0x00000015>;
clocks = <0x00000005>;
#address-cells = <0x00000001>;
#size-cells = <0x00000000>;
status = "disabled";
pinctrl-names = "default";
pinctrl-0 = <0x0000000c>;
clock-frequency = <0x000186a0>;
phandle = <0x00000019>;
};
pwm@7e20c000 {
compatible = "brcm,bcm2835-pwm";
reg = <0x7e20c000 0x00000028>;
clocks = <0x0000000d>;
#pwm-cells = <0x00000002>;
status = "disabled";
phandle = <0x00000026>;
};
aux@0x7e215004 {
compatible = "brcm,bcm2835-aux";
#clock-cells = <0x00000001>;
reg = <0x7e215000 0x00000008>;
clocks = <0x00000005>;
status = "disabled";
phandle = <0x0000000f>;
};
uart@7e215040 {
compatible = "brcm,bcm2835-aux-uart", "ns16550";
reg = <0x7e215040 0x00000040>;
interrupts = <0x00000001 0x0000001d>;
clocks = <0x0000000e>;
reg-shift = <0x00000002>;
no-loopback-test;
status = "disabled";
phandle = <0x00000016>;
};
spi@7e215080 {
compatible = "brcm,bcm2835-aux-spi";
reg = <0x7e215080 0x00000040 0x7e215000 0x00000008>;
interrupts = <0x00000001 0x0000001d>;
clocks = <0x0000000f 0x00000001>;
#address-cells = <0x00000001>;
#size-cells = <0x00000000>;
status = "disabled";
phandle = <0x00000027>;
};
spi@7e2150C0 {
compatible = "brcm,bcm2835-aux-spi";
reg = <0x7e2150c0 0x00000040 0x7e215000 0x00000008>;
interrupts = <0x00000001 0x0000001d>;
clocks = <0x0000000f 0x00000002>;
#address-cells = <0x00000001>;
#size-cells = <0x00000000>;
status = "disabled";
phandle = <0x00000028>;
};
mmc@7e300000 {
compatible = "brcm,bcm2835-mmc";
reg = <0x7e300000 0x00000100>;
interrupts = <0x00000002 0x0000001e>;
clocks = <0x00000010>;
dmas = <0x00000006 0x0000000b>;
dma-names = "rx-tx";
brcm,overclock-50 = <0x00000000>;
status = "disabled";
phandle = <0x00000029>;
};
i2c@7e804000 {
compatible = "brcm,bcm2708-i2c";
reg = <0x7e804000 0x00001000>;
interrupts = <0x00000002 0x00000015>;
clocks = <0x00000005>;
#address-cells = <0x00000001>;
#size-cells = <0x00000000>;
status = "disabled";
pinctrl-names = "default";
pinctrl-0 = <0x00000011>;
clock-frequency = <0x000186a0>;
phandle = <0x0000001a>;
};
i2c@7e805000 {
compatible = "brcm,bcm2708-i2c";
reg = <0x7e805000 0x00001000>;
interrupts = <0x00000002 0x00000015>;
clocks = <0x00000005>;
#address-cells = <0x00000001>;
#size-cells = <0x00000000>;
status = "disabled";
clock-frequency = <0x000186a0>;
phandle = <0x0000001b>;
};
smi@7e600000 {
compatible = "brcm,bcm2835-smi";
reg = <0x7e600000 0x00000044 0x7e1010b0 0x00000008>;
interrupts = <0x00000002 0x00000010>;
brcm,smi-clock-source = <0x00000006>;
brcm,smi-clock-divisor = <0x00000004>;
dmas = <0x00000006 0x00000004>;
dma-names = "rx-tx";
status = "disabled";
phandle = <0x0000002a>;
};
usb@7e980000 {
compatible = "brcm,bcm2708-usb";
reg = <0x7e980000 0x00010000 0x7e006000 0x00001000>;
interrupts = <0x00000002 0x00000000 0x00000001 0x00000009>;
phandle = <0x0000002b>;
};
firmware {
compatible = "raspberrypi,bcm2835-firmware";
mboxes = <0x00000012>;
phandle = <0x00000013>;
};
power {
compatible = "raspberrypi,bcm2835-power";
firmware = <0x00000013>;
#power-domain-cells = <0x00000001>;
phandle = <0x0000002c>;
};
leds {
compatible = "gpio-leds";
phandle = <0x0000002d>;
act {
label = "led0";
linux,default-trigger = "mmc0";
gpios = <0x00000009 0x0000002f 0x00000000>;
phandle = <0x0000001c>;
};
pwr {
label = "led1";
linux,default-trigger = "input";
gpios = <0x00000009 0x00000023 0x00000000>;
phandle = <0x0000001d>;
};
};
fb {
compatible = "brcm,bcm2708-fb";
firmware = <0x00000013>;
status = "okay";
phandle = <0x0000002e>;
};
vchiq {
compatible = "brcm,bcm2835-vchiq";
reg = <0x7e00b840 0x0000000f>;
interrupts = <0x00000000 0x00000002>;
cache-line-size = <0x00000020>;
firmware = <0x00000013>;
phandle = <0x00000014>;
};
thermal {
compatible = "brcm,bcm2835-thermal";
firmware = <0x00000013>;
phandle = <0x0000002f>;
};
audio {
compatible = "brcm,bcm2835-audio";
brcm,pwm-channels = <0x00000008>;
status = "disabled";
phandle = <0x0000001e>;
};
sound {
status = "disabled";
phandle = <0x00000030>;
};
timer@7e003000 {
compatible = "brcm,bcm2835-system-timer";
reg = <0x7e003000 0x00001000>;
interrupts = <0x00000001 0x00000000 0x00000001 0x00000001 0x00000001 0x00000002 0x00000001 0x00000003>;
clock-frequency = <0x000f4240>;
};
arm-pmu {
compatible = "arm,arm1176-pmu";
};
gpiomem {
compatible = "brcm,bcm2835-gpiomem";
reg = <0x7e200000 0x00001000>;
status = "okay";
};
};
clocks {
compatible = "simple-bus";
#address-cells = <0x00000001>;
#size-cells = <0x00000000>;
phandle = <0x00000031>;
clock@0 {
compatible = "fixed-clock";
reg = <0x00000000>;
#clock-cells = <0x00000000>;
clock-output-names = "core";
clock-frequency = <0x0ee6b280>;
phandle = <0x00000005>;
};
clock@1 {
compatible = "fixed-clock";
reg = <0x00000001>;
#clock-cells = <0x00000000>;
clock-output-names = "mmc";
clock-frequency = <0x0ee6b280>;
phandle = <0x00000010>;
};
clock@2 {
compatible = "fixed-clock";
reg = <0x00000002>;
#clock-cells = <0x00000000>;
clock-output-names = "uart0_pclk";
clock-frequency = <0x002dc6c0>;
phandle = <0x00000003>;
};
clock@3 {
compatible = "fixed-clock";
reg = <0x00000003>;
#clock-cells = <0x00000000>;
clock-output-names = "apb_pclk";
clock-frequency = <0x07829b80>;
phandle = <0x00000004>;
};
clock@4 {
compatible = "fixed-clock";
reg = <0x00000004>;
#clock-cells = <0x00000000>;
clock-output-names = "pwm";
clock-frequency = <0x05f5e100>;
phandle = <0x0000000d>;
};
clock@5 {
compatible = "fixed-factor-clock";
reg = <0x00000005>;
clocks = <0x00000005>;
#clock-cells = <0x00000000>;
clock-div = <0x00000001>;
clock-mult = <0x00000002>;
phandle = <0x0000000e>;
};
clock@6 {
compatible = "fixed-clock";
reg = <0x00000006>;
#clock-cells = <0x00000000>;
clock-output-names = "osc";
clock-frequency = <0x0124f800>;
phandle = <0x00000002>;
};
};
__overrides__ {
cache_line_size = [00 00 00 14 63 61 63 68 65 2d 6c 69 6e 65 2d 73 69 7a 65 3a 30 00];
uart0 = [00 00 00 15 73 74 61 74 75 73 00];
uart0_clkrate = [00 00 00 03 63 6c 6f 63 6b 2d 66 72 65 71 75 65 6e 63 79 3a 30 00];
uart1 = [00 00 00 16 73 74 61 74 75 73 00];
i2s = [00 00 00 17 73 74 61 74 75 73 00];
spi = [00 00 00 18 73 74 61 74 75 73 00];
i2c0 = [00 00 00 19 73 74 61 74 75 73 00];
i2c1 = [00 00 00 1a 73 74 61 74 75 73 00];
i2c2_iknowwhatimdoing = [00 00 00 1b 73 74 61 74 75 73 00];
i2c0_baudrate = [00 00 00 19 63 6c 6f 63 6b 2d 66 72 65 71 75 65 6e 63 79 3a 30 00];
i2c1_baudrate = [00 00 00 1a 63 6c 6f 63 6b 2d 66 72 65 71 75 65 6e 63 79 3a 30 00];
i2c2_baudrate = [00 00 00 1b 63 6c 6f 63 6b 2d 66 72 65 71 75 65 6e 63 79 3a 30 00];
core_freq = [00 00 00 05 63 6c 6f 63 6b 2d 66 72 65 71 75 65 6e 63 79 3a 30 00];
act_led_gpio = <0x0000001c 0x6770696f 0x733a3400>;
act_led_activelow = <0x0000001c 0x6770696f 0x733a3800>;
act_led_trigger = [00 00 00 1c 6c 69 6e 75 78 2c 64 65 66 61 75 6c 74 2d 74 72 69 67 67 65 72 00];
pwr_led_gpio = <0x0000001d 0x6770696f 0x733a3400>;
pwr_led_activelow = <0x0000001d 0x6770696f 0x733a3800>;
pwr_led_trigger = [00 00 00 1d 6c 69 6e 75 78 2c 64 65 66 61 75 6c 74 2d 74 72 69 67 67 65 72 00];
audio = [00 00 00 1e 73 74 61 74 75 73 00];
watchdog = [00 00 00 1f 73 74 61 74 75 73 00];
random = [00 00 00 20 73 74 61 74 75 73 00];
sd_overclock = <0x00000021 0x6272636d 0x2c6f7665 0x72636c6f 0x636b2d35 0x303a3000>;
sd_force_pio = <0x00000021 0x6272636d 0x2c666f72 0x63652d70 0x696f3f00>;
sd_pio_limit = [00 00 00 21 62 72 63 6d 2c 70 69 6f 2d 6c 69 6d 69 74 3a 30 00];
sd_debug = [00 00 00 21 62 72 63 6d 2c 64 65 62 75 67 00];
};
__symbols__ {
soc = "/soc";
dma = "/soc/dma@7e007000";
intc = "/soc/interrupt-controller@7e00b200";
mailbox = "/soc/mailbox@7e00b800";
watchdog = "/soc/watchdog@7e100000";
cprman = "/soc/cprman@7e101000";
random = "/soc/rng@7e104000";
gpio = "/soc/gpio@7e200000";
sdhost_pins = "/soc/gpio@7e200000/sdhost_pins";
spi0_pins = "/soc/gpio@7e200000/spi0_pins";
spi0_cs_pins = "/soc/gpio@7e200000/spi0_cs_pins";
i2c0_pins = "/soc/gpio@7e200000/i2c0";
i2c1_pins = "/soc/gpio@7e200000/i2c1";
i2s_pins = "/soc/gpio@7e200000/i2s";
uart0 = "/soc/uart@7e201000";
sdhost = "/soc/sdhost@7e202000";
i2s = "/soc/i2s@7e203000";
spi0 = "/soc/spi@7e204000";
spidev0 = "/soc/spi@7e204000/spidev@0";
spidev1 = "/soc/spi@7e204000/spidev@1";
i2c0 = "/soc/i2c@7e205000";
pwm = "/soc/pwm@7e20c000";
aux = "/soc/aux@0x7e215004";
uart1 = "/soc/uart@7e215040";
spi1 = "/soc/spi@7e215080";
spi2 = "/soc/spi@7e2150C0";
mmc = "/soc/mmc@7e300000";
i2c1 = "/soc/i2c@7e804000";
i2c2 = "/soc/i2c@7e805000";
smi = "/soc/smi@7e600000";
usb = "/soc/usb@7e980000";
firmware = "/soc/firmware";
power = "/soc/power";
leds = "/soc/leds";
act_led = "/soc/leds/act";
pwr_led = "/soc/leds/pwr";
fb = "/soc/fb";
vchiq = "/soc/vchiq";
thermal = "/soc/thermal";
audio = "/soc/audio";
sound = "/soc/sound";
clocks = "/clocks";
clk_core = "/clocks/clock@0";
clk_mmc = "/clocks/clock@1";
clk_uart0 = "/clocks/clock@2";
clk_apb_p = "/clocks/clock@3";
clk_pwm = "/clocks/clock@4";
clk_uart1 = "/clocks/clock@5";
clk_osc = "/clocks/clock@6";
};
};

7
projects/rpi_domo/dts/build.sh
View File

@@ -1,7 +0,0 @@
# Dump the final dtb file for the PI B+ used for the Pi_QuartetIII target.
#
#../../../../../_builds/pi_QuartetIII-release/cross/usr/bin/fdtdump bcm2708-rpi-b-plus.dtb > bcm2708-rpi-b-plus.dti
#
../../../_builds/pi_domo-release/cross/usr/bin/dtc -O dtb -o pi_Domo.dtb pi_Domo.dts

BIN
projects/rpi_domo/dts/pi_Domo.dtb
View File

Binary file not shown.

6
projects/rpi_domo/dts/pi_Domo.dts → projects/rpi_domo/dts/rpi_domo.dts
View File

@@ -7,8 +7,10 @@
mmc {
status = "okay";
};
i2c {
i2c@7e804000 {
clock-frequency = <0x30d40>;
status = "okay";
};
};
};
};