arch=arm
baudrate=115200
board=rpi
board_name=Model B+
board_rev=0x10
board_rev_scheme=0
board_revision=0x10
stderr=serial
stdin=serial
stdout=serial
boot_prefixes=/ /boot/
boot_scripts=boot.scr boot.scr.uimg
boot_targets=fel mmc0 mmc1
bootcmd=run distro_bootcmd
distro_bootcmd=for target in ${boot_targets}; do run bootcmd_${target}; done
bootcmd_fel=if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then echo '(FEL boot)'; source ${fel_scriptaddr}; fi
bootcmd_mmc0=setenv devnum 0; run mmc_boot
bootcmd_mmc1=setenv devnum 1; run mmc_boot
mmc_boot=if mmc dev ${devnum}; then setenv devtype mmc; run scan_dev_for_boot_part; fi
scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then run scan_dev_for_boot; fi; done
scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_scripts; done;
scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done
boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr}
console=ttyS0,115200
scriptaddr=0x43100000
fdt_addr_r=0x43000000
kernel_addr_r=0x42000000
ramdisk_addr_r=0x43300000
dev=run dev_boot
dev_boot=mmc dev 0; fatload mmc 0:1 ${scriptaddr} dev.scr; source ${scriptaddr}
update=run update_scr
update_scr=mmc dev 0; fatload mmc 0:1 ${scriptaddr} update.scr; source ${scriptaddr}
is_configured=0