/ {
    #address-cells = <0x00000001>;
    #size-cells = <0x00000001>;
    interrupt-parent = <0x00000001>;
    compatible = "brcm,bcm2708";
    model = "Raspberry Pi Model B+";
    chosen {
        bootargs = [00];
    };
    aliases {
        audio = "/soc/audio";
        aux = "/soc/aux@0x7e215004";
        sound = "/soc/sound";
        soc = "/soc";
        dma = "/soc/dma@7e007000";
        intc = "/soc/interrupt-controller@7e00b200";
        watchdog = "/soc/watchdog@7e100000";
        random = "/soc/rng@7e104000";
        mailbox = "/soc/mailbox@7e00b800";
        gpio = "/soc/gpio@7e200000";
        uart0 = "/soc/uart@7e201000";
        sdhost = "/soc/sdhost@7e202000";
        i2s = "/soc/i2s@7e203000";
        spi0 = "/soc/spi@7e204000";
        i2c0 = "/soc/i2c@7e205000";
        uart1 = "/soc/uart@7e215040";
        spi1 = "/soc/spi@7e215080";
        spi2 = "/soc/spi@7e2150C0";
        mmc = "/soc/mmc@7e300000";
        i2c1 = "/soc/i2c@7e804000";
        i2c2 = "/soc/i2c@7e805000";
        usb = "/soc/usb@7e980000";
        leds = "/soc/leds";
        fb = "/soc/fb";
        vchiq = "/soc/vchiq";
        thermal = "/soc/thermal";
        clocks = "/clocks";
    };
    memory {
        device_type = "memory";
        reg = <0x00000000 0x00000000>;
    };
    soc {
        compatible = "simple-bus";
        #address-cells = <0x00000001>;
        #size-cells = <0x00000001>;
        ranges = <0x7e000000 0x20000000 0x01000000>;
        phandle = <0x00000022>;
        dma@7e007000 {
            compatible = "brcm,bcm2835-dma";
            reg = <0x7e007000 0x00000f00>;
            interrupts = <0x00000001 0x00000010 0x00000001 0x00000011 0x00000001 0x00000012 0x00000001 0x00000013 0x00000001 0x00000014 0x00000001 0x00000015 0x00000001 0x00000016 0x00000001 0x00000017 0x00000001 0x00000018 0x00000001 0x00000019 0x00000001 0x0000001a 0x00000001 0x0000001b>;
            #dma-cells = <0x00000001>;
            brcm,dma-channel-mask = <0x00000f35>;
            phandle = <0x00000006>;
        };
        interrupt-controller@7e00b200 {
            compatible = "brcm,bcm2835-armctrl-ic";
            reg = <0x7e00b200 0x00000200>;
            interrupt-controller;
            #interrupt-cells = <0x00000002>;
            phandle = <0x00000001>;
        };
        mailbox@7e00b800 {
            compatible = "brcm,bcm2835-mbox";
            reg = <0x7e00b880 0x00000040>;
            interrupts = <0x00000000 0x00000001>;
            #mbox-cells = <0x00000000>;
            phandle = <0x00000012>;
        };
        watchdog@7e100000 {
            compatible = "brcm,bcm2835-pm-wdt";
            reg = <0x7e100000 0x00000028>;
            status = "okay";
            phandle = <0x0000001f>;
        };
        cprman@7e101000 {
            compatible = "brcm,bcm2835-cprman";
            #clock-cells = <0x00000001>;
            reg = <0x7e101000 0x00002000>;
            clocks = <0x00000002>;
            status = "disabled";
            phandle = <0x00000023>;
        };
        rng@7e104000 {
            compatible = "brcm,bcm2835-rng";
            reg = <0x7e104000 0x00000010>;
            status = "okay";
            phandle = <0x00000020>;
        };
        gpio@7e200000 {
            compatible = "brcm,bcm2835-gpio";
            reg = <0x7e200000 0x000000b4>;
            interrupts = <0x00000002 0x00000011 0x00000002 0x00000012>;
            gpio-controller;
            #gpio-cells = <0x00000002>;
            interrupt-controller;
            #interrupt-cells = <0x00000002>;
            phandle = <0x00000009>;
            sdhost_pins {
                brcm,pins = <0x00000030 0x00000031 0x00000032 0x00000033 0x00000034 0x00000035>;
                brcm,function = <0x00000004>;
                phandle = <0x00000007>;
            };
            spi0_pins {
                brcm,pins = <0x00000009 0x0000000a 0x0000000b>;
                brcm,function = <0x00000004>;
                phandle = <0x0000000a>;
            };
            spi0_cs_pins {
                brcm,pins = <0x00000008 0x00000007>;
                brcm,function = <0x00000001>;
                phandle = <0x0000000b>;
            };
            i2c0 {
                brcm,pins = <0x00000000 0x00000001>;
                brcm,function = <0x00000004>;
                phandle = <0x0000000c>;
            };
            i2c1 {
                brcm,pins = <0x00000002 0x00000003>;
                brcm,function = <0x00000004>;
                phandle = <0x00000011>;
            };
            i2s {
                brcm,pins = <0x00000012 0x00000013 0x00000014 0x00000015>;
                brcm,function = <0x00000004>;
                phandle = <0x00000008>;
            };
        };
        uart@7e201000 {
            compatible = "arm,pl011", "arm,primecell";
            reg = <0x7e201000 0x00001000>;
            interrupts = <0x00000002 0x00000019>;
            clocks = <0x00000003 0x00000004>;
            clock-names = "uartclk", "apb_pclk";
            arm,primecell-periphid = <0x00241011>;
            status = "okay";
            phandle = <0x00000015>;
        };
        sdhost@7e202000 {
            compatible = "brcm,bcm2835-sdhost";
            reg = <0x7e202000 0x00000100>;
            interrupts = <0x00000002 0x00000018>;
            clocks = <0x00000005>;
            dmas = <0x00000006 0x0000000d>;
            dma-names = "rx-tx";
            brcm,overclock-50 = <0x00000000>;
            brcm,pio-limit = <0x00000001>;
            status = "okay";
            pinctrl-names = "default";
            pinctrl-0 = <0x00000007>;
            bus-width = <0x00000004>;
            phandle = <0x00000021>;
        };
        i2s@7e203000 {
            compatible = "brcm,bcm2835-i2s";
            reg = <0x7e203000 0x00000024 0x7e101098 0x00000008>;
            dmas = <0x00000006 0x00000002 0x00000006 0x00000003>;
            dma-names = "tx", "rx";
            status = "disabled";
            #sound-dai-cells = <0x00000000>;
            pinctrl-names = "default";
            pinctrl-0 = <0x00000008>;
            phandle = <0x00000017>;
        };
        spi@7e204000 {
            compatible = "brcm,bcm2835-spi";
            reg = <0x7e204000 0x00001000>;
            interrupts = <0x00000002 0x00000016>;
            clocks = <0x00000005>;
            #address-cells = <0x00000001>;
            #size-cells = <0x00000000>;
            status = "disabled";
            dmas = <0x00000006 0x00000006 0x00000006 0x00000007>;
            dma-names = "tx", "rx";
            cs-gpios = <0x00000009 0x00000008 0x00000001 0x00000009 0x00000007 0x00000001>;
            pinctrl-names = "default";
            pinctrl-0 = <0x0000000a 0x0000000b>;
            phandle = <0x00000018>;
            spidev@0 {
                compatible = "spidev";
                reg = <0x00000000>;
                #address-cells = <0x00000001>;
                #size-cells = <0x00000000>;
                spi-max-frequency = <0x0007a120>;
                phandle = <0x00000024>;
            };
            spidev@1 {
                compatible = "spidev";
                reg = <0x00000001>;
                #address-cells = <0x00000001>;
                #size-cells = <0x00000000>;
                spi-max-frequency = <0x0007a120>;
                phandle = <0x00000025>;
            };
        };
        i2c@7e205000 {
            compatible = "brcm,bcm2708-i2c";
            reg = <0x7e205000 0x00001000>;
            interrupts = <0x00000002 0x00000015>;
            clocks = <0x00000005>;
            #address-cells = <0x00000001>;
            #size-cells = <0x00000000>;
            status = "disabled";
            pinctrl-names = "default";
            pinctrl-0 = <0x0000000c>;
            clock-frequency = <0x000186a0>;
            phandle = <0x00000019>;
        };
        pwm@7e20c000 {
            compatible = "brcm,bcm2835-pwm";
            reg = <0x7e20c000 0x00000028>;
            clocks = <0x0000000d>;
            #pwm-cells = <0x00000002>;
            status = "disabled";
            phandle = <0x00000026>;
        };
        aux@0x7e215004 {
            compatible = "brcm,bcm2835-aux";
            #clock-cells = <0x00000001>;
            reg = <0x7e215000 0x00000008>;
            clocks = <0x00000005>;
            status = "disabled";
            phandle = <0x0000000f>;
        };
        uart@7e215040 {
            compatible = "brcm,bcm2835-aux-uart", "ns16550";
            reg = <0x7e215040 0x00000040>;
            interrupts = <0x00000001 0x0000001d>;
            clocks = <0x0000000e>;
            reg-shift = <0x00000002>;
            no-loopback-test;
            status = "disabled";
            phandle = <0x00000016>;
        };
        spi@7e215080 {
            compatible = "brcm,bcm2835-aux-spi";
            reg = <0x7e215080 0x00000040 0x7e215000 0x00000008>;
            interrupts = <0x00000001 0x0000001d>;
            clocks = <0x0000000f 0x00000001>;
            #address-cells = <0x00000001>;
            #size-cells = <0x00000000>;
            status = "disabled";
            phandle = <0x00000027>;
        };
        spi@7e2150C0 {
            compatible = "brcm,bcm2835-aux-spi";
            reg = <0x7e2150c0 0x00000040 0x7e215000 0x00000008>;
            interrupts = <0x00000001 0x0000001d>;
            clocks = <0x0000000f 0x00000002>;
            #address-cells = <0x00000001>;
            #size-cells = <0x00000000>;
            status = "disabled";
            phandle = <0x00000028>;
        };
        mmc@7e300000 {
            compatible = "brcm,bcm2835-mmc";
            reg = <0x7e300000 0x00000100>;
            interrupts = <0x00000002 0x0000001e>;
            clocks = <0x00000010>;
            dmas = <0x00000006 0x0000000b>;
            dma-names = "rx-tx";
            brcm,overclock-50 = <0x00000000>;
            status = "disabled";
            phandle = <0x00000029>;
        };
        i2c@7e804000 {
            compatible = "brcm,bcm2708-i2c";
            reg = <0x7e804000 0x00001000>;
            interrupts = <0x00000002 0x00000015>;
            clocks = <0x00000005>;
            #address-cells = <0x00000001>;
            #size-cells = <0x00000000>;
            status = "disabled";
            pinctrl-names = "default";
            pinctrl-0 = <0x00000011>;
            clock-frequency = <0x000186a0>;
            phandle = <0x0000001a>;
        };
        i2c@7e805000 {
            compatible = "brcm,bcm2708-i2c";
            reg = <0x7e805000 0x00001000>;
            interrupts = <0x00000002 0x00000015>;
            clocks = <0x00000005>;
            #address-cells = <0x00000001>;
            #size-cells = <0x00000000>;
            status = "disabled";
            clock-frequency = <0x000186a0>;
            phandle = <0x0000001b>;
        };
        smi@7e600000 {
            compatible = "brcm,bcm2835-smi";
            reg = <0x7e600000 0x00000044 0x7e1010b0 0x00000008>;
            interrupts = <0x00000002 0x00000010>;
            brcm,smi-clock-source = <0x00000006>;
            brcm,smi-clock-divisor = <0x00000004>;
            dmas = <0x00000006 0x00000004>;
            dma-names = "rx-tx";
            status = "disabled";
            phandle = <0x0000002a>;
        };
        usb@7e980000 {
            compatible = "brcm,bcm2708-usb";
            reg = <0x7e980000 0x00010000 0x7e006000 0x00001000>;
            interrupts = <0x00000002 0x00000000 0x00000001 0x00000009>;
            phandle = <0x0000002b>;
        };
        firmware {
            compatible = "raspberrypi,bcm2835-firmware";
            mboxes = <0x00000012>;
            phandle = <0x00000013>;
        };
        power {
            compatible = "raspberrypi,bcm2835-power";
            firmware = <0x00000013>;
            #power-domain-cells = <0x00000001>;
            phandle = <0x0000002c>;
        };
        leds {
            compatible = "gpio-leds";
            phandle = <0x0000002d>;
            act {
                label = "led0";
                linux,default-trigger = "mmc0";
                gpios = <0x00000009 0x0000002f 0x00000000>;
                phandle = <0x0000001c>;
            };
            pwr {
                label = "led1";
                linux,default-trigger = "input";
                gpios = <0x00000009 0x00000023 0x00000000>;
                phandle = <0x0000001d>;
            };
        };
        fb {
            compatible = "brcm,bcm2708-fb";
            firmware = <0x00000013>;
            status = "okay";
            phandle = <0x0000002e>;
        };
        vchiq {
            compatible = "brcm,bcm2835-vchiq";
            reg = <0x7e00b840 0x0000000f>;
            interrupts = <0x00000000 0x00000002>;
            cache-line-size = <0x00000020>;
            firmware = <0x00000013>;
            phandle = <0x00000014>;
        };
        thermal {
            compatible = "brcm,bcm2835-thermal";
            firmware = <0x00000013>;
            phandle = <0x0000002f>;
        };
        audio {
            compatible = "brcm,bcm2835-audio";
            brcm,pwm-channels = <0x00000008>;
            status = "disabled";
            phandle = <0x0000001e>;
        };
        sound {
            status = "disabled";
            phandle = <0x00000030>;
        };
        timer@7e003000 {
            compatible = "brcm,bcm2835-system-timer";
            reg = <0x7e003000 0x00001000>;
            interrupts = <0x00000001 0x00000000 0x00000001 0x00000001 0x00000001 0x00000002 0x00000001 0x00000003>;
            clock-frequency = <0x000f4240>;
        };
        arm-pmu {
            compatible = "arm,arm1176-pmu";
        };
        gpiomem {
            compatible = "brcm,bcm2835-gpiomem";
            reg = <0x7e200000 0x00001000>;
            status = "okay";
        };
    };
    clocks {
        compatible = "simple-bus";
        #address-cells = <0x00000001>;
        #size-cells = <0x00000000>;
        phandle = <0x00000031>;
        clock@0 {
            compatible = "fixed-clock";
            reg = <0x00000000>;
            #clock-cells = <0x00000000>;
            clock-output-names = "core";
            clock-frequency = <0x0ee6b280>;
            phandle = <0x00000005>;
        };
        clock@1 {
            compatible = "fixed-clock";
            reg = <0x00000001>;
            #clock-cells = <0x00000000>;
            clock-output-names = "mmc";
            clock-frequency = <0x0ee6b280>;
            phandle = <0x00000010>;
        };
        clock@2 {
            compatible = "fixed-clock";
            reg = <0x00000002>;
            #clock-cells = <0x00000000>;
            clock-output-names = "uart0_pclk";
            clock-frequency = <0x002dc6c0>;
            phandle = <0x00000003>;
        };
        clock@3 {
            compatible = "fixed-clock";
            reg = <0x00000003>;
            #clock-cells = <0x00000000>;
            clock-output-names = "apb_pclk";
            clock-frequency = <0x07829b80>;
            phandle = <0x00000004>;
        };
        clock@4 {
            compatible = "fixed-clock";
            reg = <0x00000004>;
            #clock-cells = <0x00000000>;
            clock-output-names = "pwm";
            clock-frequency = <0x05f5e100>;
            phandle = <0x0000000d>;
        };
        clock@5 {
            compatible = "fixed-factor-clock";
            reg = <0x00000005>;
            clocks = <0x00000005>;
            #clock-cells = <0x00000000>;
            clock-div = <0x00000001>;
            clock-mult = <0x00000002>;
            phandle = <0x0000000e>;
        };
        clock@6 {
            compatible = "fixed-clock";
            reg = <0x00000006>;
            #clock-cells = <0x00000000>;
            clock-output-names = "osc";
            clock-frequency = <0x0124f800>;
            phandle = <0x00000002>;
        };
    };
    __overrides__ {
        cache_line_size = [00 00 00 14 63 61 63 68 65 2d 6c 69 6e 65 2d 73 69 7a 65 3a 30 00];
        uart0 = [00 00 00 15 73 74 61 74 75 73 00];
        uart0_clkrate = [00 00 00 03 63 6c 6f 63 6b 2d 66 72 65 71 75 65 6e 63 79 3a 30 00];
        uart1 = [00 00 00 16 73 74 61 74 75 73 00];
        i2s = [00 00 00 17 73 74 61 74 75 73 00];
        spi = [00 00 00 18 73 74 61 74 75 73 00];
        i2c0 = [00 00 00 19 73 74 61 74 75 73 00];
        i2c1 = [00 00 00 1a 73 74 61 74 75 73 00];
        i2c2_iknowwhatimdoing = [00 00 00 1b 73 74 61 74 75 73 00];
        i2c0_baudrate = [00 00 00 19 63 6c 6f 63 6b 2d 66 72 65 71 75 65 6e 63 79 3a 30 00];
        i2c1_baudrate = [00 00 00 1a 63 6c 6f 63 6b 2d 66 72 65 71 75 65 6e 63 79 3a 30 00];
        i2c2_baudrate = [00 00 00 1b 63 6c 6f 63 6b 2d 66 72 65 71 75 65 6e 63 79 3a 30 00];
        core_freq = [00 00 00 05 63 6c 6f 63 6b 2d 66 72 65 71 75 65 6e 63 79 3a 30 00];
        act_led_gpio = <0x0000001c 0x6770696f 0x733a3400>;
        act_led_activelow = <0x0000001c 0x6770696f 0x733a3800>;
        act_led_trigger = [00 00 00 1c 6c 69 6e 75 78 2c 64 65 66 61 75 6c 74 2d 74 72 69 67 67 65 72 00];
        pwr_led_gpio = <0x0000001d 0x6770696f 0x733a3400>;
        pwr_led_activelow = <0x0000001d 0x6770696f 0x733a3800>;
        pwr_led_trigger = [00 00 00 1d 6c 69 6e 75 78 2c 64 65 66 61 75 6c 74 2d 74 72 69 67 67 65 72 00];
        audio = [00 00 00 1e 73 74 61 74 75 73 00];
        watchdog = [00 00 00 1f 73 74 61 74 75 73 00];
        random = [00 00 00 20 73 74 61 74 75 73 00];
        sd_overclock = <0x00000021 0x6272636d 0x2c6f7665 0x72636c6f 0x636b2d35 0x303a3000>;
        sd_force_pio = <0x00000021 0x6272636d 0x2c666f72 0x63652d70 0x696f3f00>;
        sd_pio_limit = [00 00 00 21 62 72 63 6d 2c 70 69 6f 2d 6c 69 6d 69 74 3a 30 00];
        sd_debug = [00 00 00 21 62 72 63 6d 2c 64 65 62 75 67 00];
    };
    __symbols__ {
        soc = "/soc";
        dma = "/soc/dma@7e007000";
        intc = "/soc/interrupt-controller@7e00b200";
        mailbox = "/soc/mailbox@7e00b800";
        watchdog = "/soc/watchdog@7e100000";
        cprman = "/soc/cprman@7e101000";
        random = "/soc/rng@7e104000";
        gpio = "/soc/gpio@7e200000";
        sdhost_pins = "/soc/gpio@7e200000/sdhost_pins";
        spi0_pins = "/soc/gpio@7e200000/spi0_pins";
        spi0_cs_pins = "/soc/gpio@7e200000/spi0_cs_pins";
        i2c0_pins = "/soc/gpio@7e200000/i2c0";
        i2c1_pins = "/soc/gpio@7e200000/i2c1";
        i2s_pins = "/soc/gpio@7e200000/i2s";
        uart0 = "/soc/uart@7e201000";
        sdhost = "/soc/sdhost@7e202000";
        i2s = "/soc/i2s@7e203000";
        spi0 = "/soc/spi@7e204000";
        spidev0 = "/soc/spi@7e204000/spidev@0";
        spidev1 = "/soc/spi@7e204000/spidev@1";
        i2c0 = "/soc/i2c@7e205000";
        pwm = "/soc/pwm@7e20c000";
        aux = "/soc/aux@0x7e215004";
        uart1 = "/soc/uart@7e215040";
        spi1 = "/soc/spi@7e215080";
        spi2 = "/soc/spi@7e2150C0";
        mmc = "/soc/mmc@7e300000";
        i2c1 = "/soc/i2c@7e804000";
        i2c2 = "/soc/i2c@7e805000";
        smi = "/soc/smi@7e600000";
        usb = "/soc/usb@7e980000";
        firmware = "/soc/firmware";
        power = "/soc/power";
        leds = "/soc/leds";
        act_led = "/soc/leds/act";
        pwr_led = "/soc/leds/pwr";
        fb = "/soc/fb";
        vchiq = "/soc/vchiq";
        thermal = "/soc/thermal";
        audio = "/soc/audio";
        sound = "/soc/sound";
        clocks = "/clocks";
        clk_core = "/clocks/clock@0";
        clk_mmc = "/clocks/clock@1";
        clk_uart0 = "/clocks/clock@2";
        clk_apb_p = "/clocks/clock@3";
        clk_pwm = "/clocks/clock@4";
        clk_uart1 = "/clocks/clock@5";
        clk_osc = "/clocks/clock@6";
    };
};